Skip to main content
Top
Published in: Metallurgist 11-12/2022

08-05-2022

Evaluation of the Possibility of Application of Electroerosive Cobalt–Chromium Powders for Manufacturing Products via Additive Manufacturing

Authors: E. V. Ageev, E. V. Ageeva, A. Yu. Altukhov

Published in: Metallurgist | Issue 11-12/2022

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This article presents the evaluation results on the possibility of the application of electroerosive cobalt–chromium powders for manufacturing products using additive manufacturing. The studies conducted have shown that the use of electroerosive cobalt–chromium alloy powders in additive manufacturing will enable Russian production to avoid purchasing expensive powder materials from other countries.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference A. Safdar, L. Y. Wei, A. Snis, and Z. Lai, “Evaluation of micro- structural development in electron beam melted Ti-6Al-4V,” Mater. Charact., 65, 8–15 (2012).CrossRef A. Safdar, L. Y. Wei, A. Snis, and Z. Lai, “Evaluation of micro- structural development in electron beam melted Ti-6Al-4V,” Mater. Charact., 65, 8–15 (2012).CrossRef
2.
go back to reference A. Safdar, H. Z. He, L. Y. Wei, A. Snis, et al., “Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V,” Rapid Prototyp. J., 18, No. 5, 401–408 (2012).CrossRef A. Safdar, H. Z. He, L. Y. Wei, A. Snis, et al., “Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V,” Rapid Prototyp. J., 18, No. 5, 401–408 (2012).CrossRef
3.
go back to reference L. Loeber, S. Biamino, U. Ackelid, et al., “Comparison of selective laser and electron beam melted titanium aluminides,” in: Proc. of 22nd Int. Symp. “Solid Free from Fabrication” (University of Texas, Austin. 2011) (2011), pp. 547–556. L. Loeber, S. Biamino, U. Ackelid, et al., “Comparison of selective laser and electron beam melted titanium aluminides,” in: Proc. of 22nd Int. Symp. “Solid Free from Fabrication” (University of Texas, Austin. 2011) (2011), pp. 547–556.
4.
go back to reference S. Biamino, A. Penna, U. Ackelid, et al., “Electron beam melting of Ti–48Al–2Cr–2Nb alloy: microstructure and mechanical properties investigation,” Intermetallics, 19, 776–781 (2011).CrossRef S. Biamino, A. Penna, U. Ackelid, et al., “Electron beam melting of Ti–48Al–2Cr–2Nb alloy: microstructure and mechanical properties investigation,” Intermetallics, 19, 776–781 (2011).CrossRef
5.
go back to reference D. D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe, “Laser additive manufacturing of metallic components: materials, processes and mechanisms,” Int. Mater. Rev., 57, No. 3, 133–164 (2012).CrossRef D. D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe, “Laser additive manufacturing of metallic components: materials, processes and mechanisms,” Int. Mater. Rev., 57, No. 3, 133–164 (2012).CrossRef
6.
go back to reference B. Song, S. Dong, B. Zhang, et al., “Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V,” Mater. Des., 35, 120–125 (2012).CrossRef B. Song, S. Dong, B. Zhang, et al., “Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V,” Mater. Des., 35, 120–125 (2012).CrossRef
7.
go back to reference B. Song, S. Dong, P. Coddet, et al., “Fabrication and microstructure characterization of selective laser melted FeAl intermetallic parts,” Surf. .Coat. Tech., 206, 4704–4709 (2012). B. Song, S. Dong, P. Coddet, et al., “Fabrication and microstructure characterization of selective laser melted FeAl intermetallic parts,” Surf. .Coat. Tech., 206, 4704–4709 (2012).
8.
go back to reference Z. Wang, K. Guana, and M. Gaoa, “The microstructure and mechanical properties of deposited-IN718 by selective laser melting,” J. Alloys Compd., 513, 518–523 (2012).CrossRef Z. Wang, K. Guana, and M. Gaoa, “The microstructure and mechanical properties of deposited-IN718 by selective laser melting,” J. Alloys Compd., 513, 518–523 (2012).CrossRef
9.
go back to reference A. G. Grigoryants, R. S. Tretyakov, and V. A. Funtikov, “Improving the quality of surface layers of parts obtained by laser additive technology,” Tekhnolog. Mashinostr., No.10, 68–73 (2015). A. G. Grigoryants, R. S. Tretyakov, and V. A. Funtikov, “Improving the quality of surface layers of parts obtained by laser additive technology,” Tekhnolog. Mashinostr., No.10, 68–73 (2015).
10.
go back to reference R. A. Latypov, E. V. Ageev, A. Y. Altukhov, and E. V. Ageeva, “Manufacture of cobalt-chromium powders by the electric discharge dispersion of wastes and their investigation,” Russ. Metallurgy (Metally), 2018, No. 12, 1177–1180 (2018).CrossRef R. A. Latypov, E. V. Ageev, A. Y. Altukhov, and E. V. Ageeva, “Manufacture of cobalt-chromium powders by the electric discharge dispersion of wastes and their investigation,” Russ. Metallurgy (Metally), 2018, No. 12, 1177–1180 (2018).CrossRef
11.
go back to reference E. V. Ageev and R. A. Latypov, “Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes,” Russ. J. Non-Ferr. Metals, 55, No. 6, 577–580 (2014).CrossRef E. V. Ageev and R. A. Latypov, “Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes,” Russ. J. Non-Ferr. Metals, 55, No. 6, 577–580 (2014).CrossRef
12.
go back to reference E. V. Ageev and R. A. Latypov, “Obtaining and research of hard alloy billets from powders obtained by electro-erosion dispersion of tungsten-containing waste,” Izv. Vyssh. Ucheb. Zav. Tsvetn. Metallurg., No. 5, 50–53 (2014). E. V. Ageev and R. A. Latypov, “Obtaining and research of hard alloy billets from powders obtained by electro-erosion dispersion of tungsten-containing waste,” Izv. Vyssh. Ucheb. Zav. Tsvetn. Metallurg., No. 5, 50–53 (2014).
13.
go back to reference M. N. Vulpe, D. N. Kolesnikov, and A. E. Morushkin, “Laser welding of billets obtained by additive technologies,” Tekhnolog. Mashinostr. Materialoved., No. 1, 142–144 (2017). M. N. Vulpe, D. N. Kolesnikov, and A. E. Morushkin, “Laser welding of billets obtained by additive technologies,” Tekhnolog. Mashinostr. Materialoved., No. 1, 142–144 (2017).
14.
go back to reference R. I. Nigmetzyanov, S. K. Sundukov, and D. S. Fatyukhin, “Influence of ultrasonic treatment on the surface roughness of parts obtained by additive technologies,” Fundament. Prikladn. Problemy Tekhn. Tekhnolog., No. 315, 47–53 (2016). R. I. Nigmetzyanov, S. K. Sundukov, and D. S. Fatyukhin, “Influence of ultrasonic treatment on the surface roughness of parts obtained by additive technologies,” Fundament. Prikladn. Problemy Tekhn. Tekhnolog., No. 315, 47–53 (2016).
15.
go back to reference D. M. Chumakov, “Prospects for the use of additive technologies in the creation of aviation and rocket-space technology,” Tr. MAI, No. 78, 31 (2014). D. M. Chumakov, “Prospects for the use of additive technologies in the creation of aviation and rocket-space technology,” Tr. MAI, No. 78, 31 (2014).
16.
go back to reference A. G. Grigoryants, D. Yu. Novichenko, and I. Yu. Smurov, “Laser additive technology for the manufacture of coatings and parts from a composite material,” Izv. Vyssh. Ucheb. Zav. Mashinostr., No. 7, 38–46 (2011). A. G. Grigoryants, D. Yu. Novichenko, and I. Yu. Smurov, “Laser additive technology for the manufacture of coatings and parts from a composite material,” Izv. Vyssh. Ucheb. Zav. Mashinostr., No. 7, 38–46 (2011).
17.
go back to reference V. N. Leitsin, S. V. Ponomarev, M. A. Dmitrieva, I. V. Ivonin, and I. M. Tyryshkin, “Simulation of the sintering process of products made of low-temperature ceramics formed by additive technologies,” Fizich. Mezomekhan., 19, No. 4, 21–27 (2016). V. N. Leitsin, S. V. Ponomarev, M. A. Dmitrieva, I. V. Ivonin, and I. M. Tyryshkin, “Simulation of the sintering process of products made of low-temperature ceramics formed by additive technologies,” Fizich. Mezomekhan., 19, No. 4, 21–27 (2016).
18.
go back to reference M. A. Volosova, A. A. Okunkova, S. G. Konov, and D. V. Kotoban, “Additive technologies: from technical creativity to innovative industrial technologies,” Tekhnich, Tvorch. Molodezhi, No. 5 (87), 9–14 (2014). M. A. Volosova, A. A. Okunkova, S. G. Konov, and D. V. Kotoban, “Additive technologies: from technical creativity to innovative industrial technologies,” Tekhnich, Tvorch. Molodezhi, No. 5 (87), 9–14 (2014).
19.
go back to reference M. M. Fedorov, “Development of a closed technological chain for the manufacture of gas-turbine engine parts using additive technologies,” Vest. Rybinskoy Gos. Aviatsion. Tekhnol. Akad. im. P. A. Solov’yeva, No. 1 (40), 115–118 (2017). M. M. Fedorov, “Development of a closed technological chain for the manufacture of gas-turbine engine parts using additive technologies,” Vest. Rybinskoy Gos. Aviatsion. Tekhnol. Akad. im. P. A. Solov’yeva, No. 1 (40), 115–118 (2017).
20.
go back to reference O. B. Kovalev, “Modeling of processes in technologies of laser additive manufacturing of bulk metal products,” Izv. RAN. Ser. Fizicheskaya, 80, No. 4, 408 (2016). O. B. Kovalev, “Modeling of processes in technologies of laser additive manufacturing of bulk metal products,” Izv. RAN. Ser. Fizicheskaya, 80, No. 4, 408 (2016).
21.
go back to reference V. V. Smirnov and E. F. Shaikhutdinova, “The introduction of additive technologies for the manufacture of parts in mass production,” Vest. Kazansk. Gos. Tekhn. Univ. im. A. N. Tupoleva, No. 2–2, 90–94 (2013). V. V. Smirnov and E. F. Shaikhutdinova, “The introduction of additive technologies for the manufacture of parts in mass production,” Vest. Kazansk. Gos. Tekhn. Univ. im. A. N. Tupoleva, No. 2–2, 90–94 (2013).
22.
go back to reference V. V. Smirnov, A. A. Ganeev, and E. F. Shaikhutdinova, “Application of additive technologies for the manufacture of parts from intermetallide titanium-based alloys,” Polzunovsk. Almanah, No. 2, 78–80 (2013). V. V. Smirnov, A. A. Ganeev, and E. F. Shaikhutdinova, “Application of additive technologies for the manufacture of parts from intermetallide titanium-based alloys,” Polzunovsk. Almanah, No. 2, 78–80 (2013).
23.
go back to reference R. A. Latypov, A. V. Serov, N. V. Serov, and I. Yu. Ignatkin, “Disposal of wastes from mechanical engineering and metallurgy during the strengthening and restoration of machine parts. Part 1,” Metallurg, No. 5. 81–87 (2021).CrossRef R. A. Latypov, A. V. Serov, N. V. Serov, and I. Yu. Ignatkin, “Disposal of wastes from mechanical engineering and metallurgy during the strengthening and restoration of machine parts. Part 1,” Metallurg, No. 5. 81–87 (2021).CrossRef
24.
go back to reference R. A. Latypov, A. V. Serov, N. V. Serov, and I. Yu. Ignatkin, “Disposal of wastes from mechanical engineering and metallurgy during the strengthening and restoration of machine parts. Part 2,” Metallurg, No. 6, 87–92 (2021).CrossRef R. A. Latypov, A. V. Serov, N. V. Serov, and I. Yu. Ignatkin, “Disposal of wastes from mechanical engineering and metallurgy during the strengthening and restoration of machine parts. Part 2,” Metallurg, No. 6, 87–92 (2021).CrossRef
Metadata
Title
Evaluation of the Possibility of Application of Electroerosive Cobalt–Chromium Powders for Manufacturing Products via Additive Manufacturing
Authors
E. V. Ageev
E. V. Ageeva
A. Yu. Altukhov
Publication date
08-05-2022
Publisher
Springer US
Published in
Metallurgist / Issue 11-12/2022
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-022-01288-0

Other articles of this Issue 11-12/2022

Metallurgist 11-12/2022 Go to the issue

Premium Partners