Top

Published in:

2024 | OriginalPaper | Chapter

Experimental and Numerical Investigation of the Forming Zone in Dieless Wire Drawing Process of Thin Biometallic Wires

Authors : Merle Braatz, Jan Bohlen, Noomane Ben Khalifa

Published in: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The chapter delves into the intricacies of dieless wire drawing, a process crucial for producing thin biodegradable wires. It investigates the forming zone, which is critical for the material's deformation during drawing. The study highlights the sensitivity of the process to parameters such as temperature and speed, and how these influence the stability and feasibility of the drawing process. Experimental data and FEM simulations are used to understand the material-dependent forming zone and its length, revealing significant differences between Mg- and Zn-based wires. The research emphasizes the importance of localized heating and the establishment of a steady-state process for successful wire drawing, offering valuable insights into optimizing the process for various alloys.

AI Generated

This summary of the content was generated with the help of AI.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Effect of Die Design on Charge Welds in Aluminium Extrusion

next chapter On-Demand Fabrication of Composites with Prescribed Properties by Multifilament Cold Extrusion

Seitz, J.-M., et al.: The Manufacture of resorbable suture material from magnesium. Adv. Eng. Mater. 12(11), 1099–1105 (2010)CrossRef

Mei, D., et al.: Corrosion behavior of Mg wires for ureteral stent in artificial urine solution. Corros. Sci. 189, 109567 (2021)CrossRef

Hirsch, J., Al-Samman, T.: Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications. Acta Mater. 61(3), 818–843 (2013)CrossRef

Tiernan, P., Hillery, M.T.: An analysis of wire manufacture using the dieless drawing method. J. Manuf. Process. 10(1), 12–20 (2008)CrossRef

Tiernan, P., Hillery, M.T.: Dieless wire drawing—an experimental and numerical analysis. J. Mater. Process. Technol. 155–156, 1178–1183 (2004)CrossRef

Furushima, T., Hirose, S., Manabe, K.-I.: Effective temperature distribution and drawing speed control for stable dieless drawing process of metal tubes. J. Solid Mech. Mat. Eng. 3(2), 236–246 (2009)CrossRef

Milenin, A., et al.: Computer aided design of the laser dieless drawing process of tubes from magnesium alloy with take into account ductility of the material. Procedia Manuf. 15, 302–310 (2018)CrossRef

Fortunier, R., Sassoulas, H., Montheillet, F.: A thermo-mechanical analysis of stability in dieless wire drawing. Int. J. Mech. Sci. 39(5), 615–627 (1997)CrossRef

Weidig, U., Steinhoff, K.: Neue perspektiven und anwendungen für das frei längen. In: Steinhoff, K., Knopp, R. (eds.) Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik, pp. 217–231. Grips media GmbH, Bad Harburg (2008)

10.

Nienaber, M., et al.: On the direct extrusion of magnesium wires from Mg-Al-Zn series alloys. Metals, 10(9) 2020

11.

Braatz, M., et al.: Experimental setup of dieless drawing process for magnesium wire. In: Production at the Leading Edge of Technology, pp. 38–46 (2021). https://doi.org/10.1007/978-3-030-78424-9_5

12.

Avedesian, M.M., Baker, H.: Properties of unalloyed Magnesium, in ASM specialty handbook: magnesium and magnesium alloys. 1999, ASM international, pp. 7–11

13.

Kammer, C.: Eigenschaften von reinem magesium. In: Aluminium-Zentrale, D. (ed.) Magnesium Taschenbuch, pp. 77–98. Aluminium-Verlag, Düsseldorf (2000)

14.

Goodwin, F.E.: Zinc and zinc alloys. In: Warlimont, H., Martienssen, W. (eds.) Springer Handbook of Materials Data. SH, pp. 431–442. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-69743-7_16CrossRef

15.

Malekan, M., Ali, K., El Haj Assad, M.: Parabolic trough solar collectors. Design and Performance Optimization of Renewable Energy Systems, pp. 85–100 (2021)

Title: Experimental and Numerical Investigation of the Forming Zone in Dieless Wire Drawing Process of Thin Biometallic Wires
Authors: Merle Braatz
Jan Bohlen
Noomane Ben Khalifa
Publisher: Springer Nature Switzerland
Book: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity
Print ISBN: 978-3-031-41022-2

Electronic ISBN: 978-3-031-41023-9

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-41023-9_49