Top

Journal of Materials Engineering and Performance

Published in:

27-02-2019

Experimental and Numerical Investigations of Cyclic Plastic Deformation of Al-Mg Alloy

Authors: Pankaj Kumar, Akhilendra Singh

Published in: Journal of Materials Engineering and Performance | Issue 3/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this work, low-cycle fatigue (LCF) tests are performed on as-received and solution-treated Al-Mg alloy (AA 5754). Solution heat treatment of the as-received alloy is performed at 530 °C for 2 h and then quenched in water at room temperature. The low-cycle fatigue response of the as-received and solution-treated alloy is evaluated at five different strain amplitudes from 0.2 to 0.6%. The strain rate of 0.5 × 10⁻³ s⁻¹ is kept constant in all the LCF tests. The LCF behavior of AA 5754 is modeled by finite element method (FEM) using Chaboche kinematic hardening cyclic plasticity model. Hardening behavior or fatigue life of as-received and solution-treated alloy is successfully simulated using this model. The results obtained by FEM simulations are compared with those obtained by LCF experiments. Microstructural studies are also performed for as-received and solution-treated alloy. The fracture surfaces obtained from LCF tests are analyzed by scanning electron microscopy.

previous article Glass-Forming Ability, Thermal Stability, and Hardness of Rapidly Solidified Al-Ni-Y-Sc Alloy Ribbons and Rods

next article In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

R. Kaibyshev, F. Musin, D.R. Lesuer, and T.G. Nieh, Superplastic Behavior of an Al-Mg Alloy at Elevated Temperatures, Mater. Sci. Eng. A, 2003, 342, p 169–177CrossRef

J.R. Davis & Associates and ASM International. Handbook Committee, Aluminum and Aluminum Alloys, ASM International, Russell, 1993

D. Hamana, L. Baziz, and M. Bouchear, Kinetics and Mechanism of Formation and Transformation of Metastable β′-Phase in Al-Mg Alloys, Mater. Chem. Phys., 2004, 84, p 112–119CrossRef

S. Nandy, A.P. Sekhar, D. Das, S.J. Hossain, and K.K. Ray, Influence of Dynamic Precipitation During Low Cycle Fatigue of Under-Aged AA6063 Alloy, Trans. Indian Inst. Met., 2016, 69, p 319–324CrossRef

S.K. Basantia, M.A. Bakkar, N. Khutia, and D. Das, Simulation of LCF Characteristic of AA6063 Al Alloy Under Different Aging Conditions, Mater. Today Proc., 2015, 2, p 2226–2235CrossRef

M. Verdier, I. Groma, L. Flandin, J. Lendvai, Y. Bréchet, and P. Guyot, Dislocation Densities and Stored Energy After Cold Rolling of Al-Mg Alloys: Investigations by Resistivity and Differential Scanning Calorimetry, Scr. Mater., 1997, 37, p 449–454CrossRef

M. Verdier, M. Janecek, Y. Brechet, and P. Guyot, Microstructural Evolution During Recovery in Al–2.5% Mg Alloys, Mater. Sci. Eng. A, 1998, 248, p 187–197CrossRef

M. Król, T. Tański, P. Snopiński, and B. Tomiczek, Structure and Properties of Aluminium–Magnesium Casting Alloys After Heat Treatment, J. Therm. Anal. Calorim., 2017, 127, p 299–308CrossRef

H.D. Chandler and J.V. Bee, Cyclic Strain Induced Precipitation in a Solution Treated Aluminium Alloy, Acta Metall., 1987, 35, p 2503–2510CrossRef

10.

V. Patlan, A. Vinogradov, K. Higashi, and K. Kitagawa, Overview of Fatigue Properties of Fine Grain 5056 Al-Mg Alloy Processed by Equal-Channel Angular Pressing, Mater. Sci. Eng. A, 2001, 300, p 171–182CrossRef

11.

J.L. Walley, E.J. Lavernia, and J.C. Gibeling, Low-Cycle Fatigue of Ultra-Fine-Grained Cryomilled 5083 Aluminum Alloy, Metall. Mater. Trans. A, 2009, 40, p 2622–2630CrossRef

12.

W.Z. Han, A. Vinogradov, and C.R. Hutchinson, On the Reversibility of Dislocation Slip During Cyclic Deformation of Al Alloys Containing Shear-Resistant Particles, Acta Mater., 2011, 59, p 3720–3736CrossRef

13.

F. Lu, G. Kang, Y. Liu, and K. Shi, Experimental Study on Uniaxial Cyclic Deformation of Rolled 5083Al Alloy, Stress, 2013, 100, p 150–158

14.

M. Sedighi, P. Monshi, and J. Joudaki, Investigation of Mechanical Properties and Fatigue Life of ECARed AA5083 Aluminium Alloy, Fatigue Fract. Eng. Mater. Struct., 2017, 40, p 412–422CrossRef

15.

J.L. Chaboche and D. Nouailhas, Constitutive Modeling of Ratchetting Effects—Part I: Experimental Facts and Properties of the Classical Models, J. Eng. Mater. Technol., 1989, 111, p 384–392CrossRef

16.

J.L. Chaboche and D. Nouailhas, A Unified Constitutive Model for Cyclic Viscoplasticity and Its Applications to Various Stainless Steels, Trans. ASME. J. Eng. Mater. Technol., 1989, 111, p 424–430CrossRef

17.

J.L. Chaboche, On Some Modifications of Kinematic Hardening to Improve the Description of Ratchetting Effects, Int. J. Plast., 1991, 7, p 661–678CrossRef

18.

Y. Jiang and H. Sehitoglu, Cyclic Ratchetting of 1070 Steel Under Multiaxial Stress States, Int. J. Plast., 1994, 10, p 579–608CrossRef

19.

M. Abdel-Karim and N. Ohno, Kinematic Hardening Model Suitable for Ratchetting with Steady-State, Int. J. Plast., 2000, 16, p 225–240CrossRef

20.

P.J. Amstrong and C.O. Frederick, A mathematical representation of the multiaxial Bauschinger effect. Central Electricity Generating Board & Berkeley Nuclear Laboratories, Research & Development Department, Berkeley, Rep. No. RD/B/N 731, 1966

21.

S. Bari and T. Hassan, Anatomy of Coupled Constitutive Models for Ratcheting Simulation, Int. J. Plast., 2000, 16, p 381–409CrossRef

22.

A. Shojaei, M.R. Eslami, and H. Mahbadi, Cyclic Loading of Beams Based on the Chaboche Model, Int. J. Mech. Mater. Des., 2010, 6, p 217–228CrossRef

23.

M. Rezaiee-Pajand and S. Sinaie, On the Calibration of the Chaboche Hardening Model and a Modified Hardening Rule for Uniaxial Ratcheting Prediction, Int. J. Solids Struct., 2009, 46, p 3009–3017CrossRef

24.

G.H. Farrahi, A. Shamloo, M. Felfeli, and M. Azadi, Numerical Simulations of Cyclic Behaviors in Light Alloys Under Isothermal and Thermo-Mechanical Fatigue Loadings, Mater. Des., 2014, 56, p 245–253CrossRef

25.

Z. Mróz and J. Maciejewski, Constitutive Modeling of Cyclic Deformation of Metals Under Strain Controlled Axial Extension and Cyclic Torsion, Acta Mech., 2018, 229, p 475–496CrossRef

26.

Z.L. Kowalewski and T. Szymczak, On the Mutual Interactions of Monotonic and Cyclic Loading and their Effect on the Strength of Aluminium Alloys, Appl. Mech. Mater., 2010, 24, p 213–218CrossRef

27.

G.B. Broggiato, F. Campana, and L. Cortese, The Chaboche Nonlinear Kinematic Hardening Model: Calibration Methodology and Validation, Meccanica, 2008, 43, p 115–124CrossRef

28.

H.E. Boyer and P. Cary, Quenching and Distortion Control, ASM International, Metal Park, 1988

29.

M.J. Starink and A.M. Zahra, β′ and β Precipitation in AN Al-Mg Alloy Studied by DSC and TEM, Acta Mater., 1998, 46, p 3381–3397CrossRef

30.

M.J. Starink and A.M. Zahra, Low-Temperature Decomposition of Al-Mg Alloys: Guinier-Preston Zones and Ll2ordered Precipitates, Philos. Mag. A, 1997, 76, p 701–714CrossRef

31.

D. Singh, P. Rao, and R. Jayaganthan, Microstructures and Impact Toughness Behavior of Al 5083 Alloy Processed by Cryorolling and Afterwards Annealing, Int. J. Miner. Metall. Mater., 2013, 20, p 759–769CrossRef

32.

K.S.V.B.R. Krishna, K. Chandra Sekhar, R. Tejas, N. Naga Krishna, K. Sivaprasad, R. Narayanasamy, and K. Venkateswarlu, Effect of Cryorolling on the Mechanical Properties of AA5083 Alloy and the Portevin-Le Chatelier Phenomenon, Mater. Des., 2015, 67, p 107–117CrossRef

33.

ASTM, Standard Test Method for Strain-Controlled Fatigue Testing, E606/E606M-12 96, p 1–16

34.

L.P. Borrego, L.M. Abreu, J.M. Costa, and J.M. Ferreira, Analysis of Low Cycle Fatigue in AlMgSi Aluminium Alloys, Eng. Fail. Anal., 2004, 11, p 715–725CrossRef

35.

D. Ye, S. Matsuoka, N. Nagashima, and N. Suzuki, The Low-Cycle Fatigue, Deformation and Final Fracture Behaviour of an Austenitic Stainless Steel, Mater. Sci. Eng. A, 2006, 415, p 104–117CrossRef

36.

H.X. Shang and H.J. Ding, Low Cycle Fatigue Stress-Strain Relation Model of Cyclic Hardening or Cyclic Softening Materials, Eng. Fract. Mech., 1996, 54, p 1–9CrossRef

37.

C.O. Frederick and P.J. Armstrong, A Mathematical Representation of the Multiaxial Bauschinger Effect, Mater. High Temp., 2007, 24, p 1–26CrossRef

38.

J.L. Chaboche, K.Dang Van, and G. Cordier, Modelizaion of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel. Int. Assoc. Struct. Mech. React. Technol., 1979, L11/3

39.

S.K. Paul, S. Sivaprasad, S. Dhar, M. Tarafder, and S. Tarafder, Simulation of Cyclic Plastic Deformation Response in SA333 C-Mn Steel by a Kinematic Hardening Model, Comput. Mater. Sci., 2010, 48, p 662–671CrossRef

40.

S.K. Paul, P.K. Rana, D. Das, S. Chandra, and S. Kundu, High and Low Cycle Fatigue Performance Comparison Between Micro-Alloyed and TMT Rebar, Constr. Build. Mater., 2014, 54, p 170–179CrossRef

41.

S. Bari and T. Hassan, An Advancement in Cyclic Plasticity Modeling for Multiaxial Ratcheting Simulation, Int. J. Plast., 2002, 18, p 873–894CrossRef

42.

P. Kumar and A. Singh, Investigation of Mechanical Properties and Fracture Simulation of Solution-Treated AA 5754, J. Mater. Eng. Perform., 2017, 26, p 4689–4706CrossRef

43.

E.L. Huskins, B. Cao, and K.T. Ramesh, Strengthening Mechanisms in an Al-Mg Alloy, Mater. Sci. Eng. A, 2010, 527, p 1292–1298CrossRef

44.

M.Z. Butt and P. Feltham, Solid-Solution Hardening, J. Mater. Sci., 1993, 28, p 2557–2576CrossRef

45.

A.T. Brammer, J.B. Jordon, P.G. Allison, and M.E. Barkey, Strain-Controlled Low-Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy, J. Mater. Eng. Perform., 2013, 22, p 1348–1350CrossRef

46.

K.L. Fan, X.S. Liu, G.Q. He, H. Cheng, and Z. Zhang, Influences of Strain Rate on the Low Cycle Fatigue Behavior of Gravity Casting Al Alloys, Mater. Charact., 2015, 107, p 239–248CrossRef

47.

D.D. Tian, X.S. Liu, G.Q. He, Y. Shen, S.Q. Lv, and Q.G. Wang, Low Cycle Fatigue Behavior of Casting A319 Alloy Under Two Different Aging Conditions, Mater. Sci. Eng. A, 2016, 654, p 60–68CrossRef

48.

C. Laird, V.J. Langelo, M. Hollrah, N.C. Yang, and R. de la Veaux, The Cyclic Stress-Strain Response of Precipitation Hardened Al-15 wt% Ag Alloy, Mater. Sci. Eng., 1978, 32, p 137–160CrossRef

49.

R.N. Lumley, I.J. Polmear, and A.J. Morton, Interrupted Aging and Secondary Precipitation in Aluminium Alloys, Mater. Sci. Technol., 2003, 19, p 1483–1490CrossRef

50.

R.N. Lumley, I.J. Polmear, and A.J. Morton, Development of Mechanical Properties During Secondary Aging in Aluminium Alloys, Mater. Sci. Technol., 2005, 21, p 1025–1032CrossRef

51.

M.E. Mercer, S.L. Dickerson, and J.C. Gibeling, Cyclic Deformation of Dispersion-Strengthened Aluminum Alloys, Mater. Sci. Eng. A, 1995, 203, p 46–58CrossRef

52.

J.M. Meininger, S.L. Dickerson, and J.C. Gibeling, Observations of Tension/Compression Asymmetry in the Cyclic Deformation of Aluminum Alloy 7075, Fatigue Fract. Eng. Mater. Struct., 1996, 19, p 85–97CrossRef

53.

B.T. Ma, Z.G. Wang, A.L. Radin, and C. Laird, Asymmetry Behavior Between Tension and Compression in the Cyclic Deformation of Copper Single Crystals and Other Ductile Metals, Mater. Sci. Eng. A, 1990, 129, p 197–206CrossRef

54.

M. Hörnqvist and B. Karlsson, Influence of Heat Treatment on the Cyclic Deformation Properties of Aluminium Alloy AA7030, Mater. Sci. Eng. A, 2008, 479, p 345–355CrossRef

55.

H. Hao, D. Ye, and C. Chen, Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy, Mater. Sci. Eng. A, 2014, 605, p 151–159CrossRef

56.

Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakata, Fracture Behaviour of Grain Refined A356 Cast Aluminium Alloy: Tensile and Charpy Impact Specimens, Mater. Sci. Eng. A, 2006, 415, p 250–254CrossRef

57.

C. Fan, P.Y. Ben Jar, and J.J. Roger Cheng, Prediction of Energy Release Rates for Crack Growth Using FEM-Based Energy Derivative Technique, Eng. Fract. Mech., 2007, 74, p 1243–1254CrossRef

Title: Experimental and Numerical Investigations of Cyclic Plastic Deformation of Al-Mg Alloy
Authors: Pankaj Kumar
Akhilendra Singh
Publication date: 27-02-2019
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 3/2019
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-019-03906-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2019

Special Issue Focus: 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017 and 13th International Conference on Diffusion in Solids and Liquids—DSL2017

Effect of pH on Corrosion Performance of Cu-Se and Cu-Se-Te Alloys in 3.5% Sodium Chloride Solution

Effect of Grain Refining on Properties of a Cast Superaustenitic Stainless Steel

A Comparison of the Fatigue Life of Shot-Peened 4340M Steel with 100, 200, and 300% Coverage

Effect of Heat Input on M-A Constituent and Toughness of Coarse Grain Heat-Affected Zone in an X100 Pipeline Steel

Experimental Analysis of the Crushing of Honeycomb Cores Under Compression

Premium Partners