Skip to main content
Top
Published in: Mechanics of Composite Materials 5/2021

20-11-2021

Experimental Investigation of the Effect of Adhesive-Impregnated Pins on the Mechanical Behavior of Z-Pinned Lap Shear Joints

Authors: A. Mirzaei, A. H. Darbandi, S. H. Taghavian

Published in: Mechanics of Composite Materials | Issue 5/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The paper illustrates the effect of applying an adhesive to pins on the mechanical properties of z-pinned joints. Three types of lap shear specimens were made for this investigation. Their mechanical properties were determined and compared. Results showed that the impregnation of pins significantly increased the shear strength of lap shear specimens.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference X. Shang, E. A. S. Marques, J. J. M. Machado, R. J. C. Carbas, D. Jiang, and L. F. M. da Silva, “Review on techniques to improve the strength of adhesive joints with composite adherends,” Composites Part B: Engineering, 177, 107363 (2019). X. Shang, E. A. S. Marques, J. J. M. Machado, R. J. C. Carbas, D. Jiang, and L. F. M. da Silva, “Review on techniques to improve the strength of adhesive joints with composite adherends,” Composites Part B: Engineering, 177, 107363 (2019).
2.
go back to reference M. Fu, and P. Mallick, “Fatigue of hybrid (adhesive/bolted) joints in SRIM composites,” International Journal of Adhesion and Adhesives, 21, No. 2, 145-159 (2001).CrossRef M. Fu, and P. Mallick, “Fatigue of hybrid (adhesive/bolted) joints in SRIM composites,” International Journal of Adhesion and Adhesives, 21, No. 2, 145-159 (2001).CrossRef
3.
go back to reference G. Kelly, “Load transfer in hybrid (bonded/bolted) composite single-lap joints,” Composite Structures, 69, No. 1, 35-43 (2005).CrossRef G. Kelly, “Load transfer in hybrid (bonded/bolted) composite single-lap joints,” Composite Structures, 69, No. 1, 35-43 (2005).CrossRef
4.
go back to reference J. H. Kweon, J. W. Jung, T. H. Kim, J. H. Choi, and D. H. kim, “Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding,” Composite Structures, 75, No. 1-4, 192-198 (2006). J. H. Kweon, J. W. Jung, T. H. Kim, J. H. Choi, and D. H. kim, “Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding,” Composite Structures, 75, No. 1-4, 192-198 (2006).
5.
go back to reference L. Tong, “Bearing failure of composite bolted joints with non-uniform bolt-to-washer clearance,” Composites Part A: Applied science and manufacturing, 31, No. 6, 609-615 (2000).CrossRef L. Tong, “Bearing failure of composite bolted joints with non-uniform bolt-to-washer clearance,” Composites Part A: Applied science and manufacturing, 31, No. 6, 609-615 (2000).CrossRef
6.
go back to reference R. Matsuzaki, M. Shibata, and A. Todoroki, “Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method,” Composites Part A: Applied Science And Manufacturing, 39, No. 2, 154-163 (2008).CrossRef R. Matsuzaki, M. Shibata, and A. Todoroki, “Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method,” Composites Part A: Applied Science And Manufacturing, 39, No. 2, 154-163 (2008).CrossRef
7.
go back to reference L. Tong, L. Jain, K. Leong, D. Kelly, and I. Herszberg, “Failure of transversely stitched RTM lap joints,” Composites Science and Technology, 58, No. 2, 221-227 (1998).CrossRef L. Tong, L. Jain, K. Leong, D. Kelly, and I. Herszberg, “Failure of transversely stitched RTM lap joints,” Composites Science and Technology, 58, No. 2, 221-227 (1998).CrossRef
8.
go back to reference P. Chang, A. Mouritz, and B. Cox, “Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension,” Composites Science and Technology, 66, No. 13, 2163-2176 (2006).CrossRef P. Chang, A. Mouritz, and B. Cox, “Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension,” Composites Science and Technology, 66, No. 13, 2163-2176 (2006).CrossRef
9.
go back to reference A. Mouritz, “Review of z-pinned composite laminates,” Composites Part A: Applied Science And Manufacturing, 38, No. 12, 2383-2397 (2007).CrossRef A. Mouritz, “Review of z-pinned composite laminates,” Composites Part A: Applied Science And Manufacturing, 38, No. 12, 2383-2397 (2007).CrossRef
10.
go back to reference D. D. Cartié, G. Dell’Anno, E. Poulin, and I. K. Partridge, “3D reinforcement of stiffener-to-skin T-joints by Z pinning and tufting,” Engineering Fracture Mechanics, 73, No. 16, 2532-2540 (2006).CrossRef D. D. Cartié, G. Dell’Anno, E. Poulin, and I. K. Partridge, “3D reinforcement of stiffener-to-skin T-joints by Z pinning and tufting,” Engineering Fracture Mechanics, 73, No. 16, 2532-2540 (2006).CrossRef
11.
go back to reference D. Graham, A. Rezai, D. Baker, P. A. Smith, and J. F. Watts, “The development and scalability of a high strength, damage tolerant, hybrid joining scheme for composite–metal structures,” Composites Part A: Applied Science and Manufacturing, 64, 11-24 (2014).CrossRef D. Graham, A. Rezai, D. Baker, P. A. Smith, and J. F. Watts, “The development and scalability of a high strength, damage tolerant, hybrid joining scheme for composite–metal structures,” Composites Part A: Applied Science and Manufacturing, 64, 11-24 (2014).CrossRef
12.
go back to reference P. Parkes, R. Butler, J. Meyer et al., “Static strength of metal-composite joints with penetrative reinforcement,” Composite Structures, 118, 250-256 (2014).CrossRef P. Parkes, R. Butler, J. Meyer et al., “Static strength of metal-composite joints with penetrative reinforcement,” Composite Structures, 118, 250-256 (2014).CrossRef
13.
go back to reference L. Yang, X. He, and L. Mei, “Interfacial shear behavior of 3D composites reinforced with CNT-grafted carbon fibers,” Composites Part A: Applied Science and Manufacturing, 43, No. 8, 1410-1418 (2012).CrossRef L. Yang, X. He, and L. Mei, “Interfacial shear behavior of 3D composites reinforced with CNT-grafted carbon fibers,” Composites Part A: Applied Science and Manufacturing, 43, No. 8, 1410-1418 (2012).CrossRef
14.
go back to reference S. Ucsnik, M. Scheerer, and S. Zaremba, “Experimental investigation of a novel hybrid metal–composite joining technology,” Composites Part A: Applied Science and Manufacturing, 41, No. 3, 369-374 (2010).CrossRef S. Ucsnik, M. Scheerer, and S. Zaremba, “Experimental investigation of a novel hybrid metal–composite joining technology,” Composites Part A: Applied Science and Manufacturing, 41, No. 3, 369-374 (2010).CrossRef
15.
go back to reference Y. B. Park, B. H. Lee, and J. H. Kweon, “The strength of composite bonded T-joints transversely reinforced by carbon pins,” Composite Structures, 94, No. 2, 625-634 (2012).CrossRef Y. B. Park, B. H. Lee, and J. H. Kweon, “The strength of composite bonded T-joints transversely reinforced by carbon pins,” Composite Structures, 94, No. 2, 625-634 (2012).CrossRef
16.
go back to reference Y. Tie, L. Wang, and C. Li, “Progressive damage finite element analysis of composite laminates repaired by pinned patches,” International Journal for Computational Methods in Engineering Science and Mechanics, 16, No. 3, 213-219 (2015).CrossRef Y. Tie, L. Wang, and C. Li, “Progressive damage finite element analysis of composite laminates repaired by pinned patches,” International Journal for Computational Methods in Engineering Science and Mechanics, 16, No. 3, 213-219 (2015).CrossRef
17.
go back to reference M. Islam and L. Tong, “Influence of pinning on static strength of co-cured metal-GFRP hybrid single lap joints,” Composites Part A: Applied Science and Manufacturing, 84, 196-208 (2016).CrossRef M. Islam and L. Tong, “Influence of pinning on static strength of co-cured metal-GFRP hybrid single lap joints,” Composites Part A: Applied Science and Manufacturing, 84, 196-208 (2016).CrossRef
18.
go back to reference M. Rezvaninasab, M. Farhadinia, and A. Mirzaei, “Experimental evaluation of reinforcing the single lap joint in both longitudinal and transverse direction under tensile and bending condition,” International Journal of Adhesion and Adhesives, 88, 19-25 (2019).CrossRef M. Rezvaninasab, M. Farhadinia, and A. Mirzaei, “Experimental evaluation of reinforcing the single lap joint in both longitudinal and transverse direction under tensile and bending condition,” International Journal of Adhesion and Adhesives, 88, 19-25 (2019).CrossRef
19.
go back to reference P. Chang, A. Mouritz, and B. Cox, “Tensile strength and fatigue properties of Z-pinned composite lap joints,” Composite Technologies for 2020, 615-620 (2004). P. Chang, A. Mouritz, and B. Cox, “Tensile strength and fatigue properties of Z-pinned composite lap joints,” Composite Technologies for 2020, 615-620 (2004).
20.
go back to reference K. Pingkarawat and A. Mouritz, “Improving the mode I delamination fatigue resistance of composites using z-pins,” Composites science and technology, 92, 70-76 (2014).CrossRef K. Pingkarawat and A. Mouritz, “Improving the mode I delamination fatigue resistance of composites using z-pins,” Composites science and technology, 92, 70-76 (2014).CrossRef
21.
go back to reference M. Kadlec, R. Růžek, and P. Bělský, “Concurrent use of Z-pins for crack arrest and structural health monitoring in adhesive-bonded composite lap joints,” Composites Science and Technology, 107967 (2019). M. Kadlec, R. Růžek, and P. Bělský, “Concurrent use of Z-pins for crack arrest and structural health monitoring in adhesive-bonded composite lap joints,” Composites Science and Technology, 107967 (2019).
22.
go back to reference A. Arnautov, A. Nasibullins, and V. Gribniak, “Experimental characterization of the properties of double-lap needled and hybrid joints of carbon/epoxy composites,” Materials, 8, No. 11, 7578-7586 (2015).CrossRef A. Arnautov, A. Nasibullins, and V. Gribniak, “Experimental characterization of the properties of double-lap needled and hybrid joints of carbon/epoxy composites,” Materials, 8, No. 11, 7578-7586 (2015).CrossRef
23.
go back to reference Y. Guo and C. Liu, “Mechanical properties of hardened AISI 52100 steel in hard machining processes,” J. Manuf. Sci. Eng., 124, No. 1, 1-9 (2002).CrossRef Y. Guo and C. Liu, “Mechanical properties of hardened AISI 52100 steel in hard machining processes,” J. Manuf. Sci. Eng., 124, No. 1, 1-9 (2002).CrossRef
24.
go back to reference ASTM D5573-99, “Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints”, ASTM International, West Conshohocken, PA, (2019) ASTM D5573-99, “Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints”, ASTM International, West Conshohocken, PA, (2019)
25.
go back to reference A. Faraz and D. Biermann, “Subsequent drilling on pilot holes in woven carbon fibre reinforced plastic epoxy laminates: the effect of drill chisel edge on delamination,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225, No. 9, 1493-1504 (2011).CrossRef A. Faraz and D. Biermann, “Subsequent drilling on pilot holes in woven carbon fibre reinforced plastic epoxy laminates: the effect of drill chisel edge on delamination,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225, No. 9, 1493-1504 (2011).CrossRef
Metadata
Title
Experimental Investigation of the Effect of Adhesive-Impregnated Pins on the Mechanical Behavior of Z-Pinned Lap Shear Joints
Authors
A. Mirzaei
A. H. Darbandi
S. H. Taghavian
Publication date
20-11-2021
Publisher
Springer US
Published in
Mechanics of Composite Materials / Issue 5/2021
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI
https://doi.org/10.1007/s11029-021-09988-5

Other articles of this Issue 5/2021

Mechanics of Composite Materials 5/2021 Go to the issue

Premium Partners