Issue 4/2017
Content (13 Articles)
Experimental Study of Nonlinear Resonances and Anti-Resonances in a Forced, Ordered Granular Chain
Y. Zhang, D. Pozharskiy, D. M. McFarland, P. G. Kevrekidis, I. G. Kevrekidis, A. F. Vakakis
A Method of Detecting the Onset of Localized Necking Based on Surface Geometry Measurements
J. Min, T. B. Stoughton, J. E. Carsley, J. Lin
Centrosymmetric 3D Deformation Measurement using Grid Method with a Single-Camera
H. Wen, Z. Liu, C. Li, X. He, J. Rong, X. Huang, H. Xie
Evaluation of Methodologies to Accelerate Corrosion Assisted Fatigue Experiments
N. Micone, W. De Waele
Open Access
A Miniaturized Biaxial Deformation Rig for in Situ Mechanical Testing
S. Van Petegem, A. Guitton, M. Dupraz, A. Bollhalder, K. Sofinowski, M.V. Upadhyay, H. Van Swygenhoven
Kinematic Field Measurements During Orthogonal Cutting Tests via DIC with Double-frame Camera and Pulsed Laser Lighting
T. Baizeau, S. Campocasso, G. Fromentin, R. Besnard
Anti-Buckling Device for Ultra-Thin Metallic Sheets Under Large and Reversed Shear Strain Paths
C.H. Pham, F. Adzima, J. Coër, P.Y. Manach
Anisotropic Mechanical Properties of SAC Solder Joints in Microelectronic Packaging and Prediction of Uniaxial Creep Using Nanoindentation Creep
M. Hasnine, J.C. Suhling, B.C. Prorok, M.J. Bozack, P. Lall
Characterization of Viscoelasticity Due to Shear Wave Propagation: a Comparison of Existing Methods Based on Computational Simulation and Experimental Data
J. F. S. Costa-Júnior, M. A. D. Elsztain, A. M. F. L. M. de Sá, J. C. Machado
Inverse Estimation of Cohesive Fracture Properties of Asphalt Mixtures Using an Optimization Approach
B. C. Hill, O. Giraldo-Londoño, G. H. Paulino, W. G. Buttlar
Brief Technical Note
Far-Field Boundary Conditions for Calculation of Hole-Drilling Residual Stress Calibration Coefficients
Antonio Baldi