Experimental Mechanics

On the Cover: Fatigue Damage Evolution in SS316L Produced by Powder Bed Fusion in Different Orientations with Reused Powder Feedstock

Mechanics of Additively Manufactured Materials

• Editorial

L.R. Xu, G. J. Pataky

Fatigue Damage Evolution in SS316L Produced by Powder Bed Fusion in Different Orientations with Reused Powder Feedstock

• Open Access
• Sp Iss: Mechanics of AM

M. Kopec, U. Gunputh, G. Williams, W. Macek, Z.L. Kowalewski, P. Wood

Dissimilar Material Joining via Interlocking Metasurfaces

• Sp Iss: Mechanics of AM

B. Elbrecht, B. Young, B. Clark, P. Noell

X-Ray Tomography-Based Characterization of the Porosity Evolution in Composites Manufactured by Fused Filament Fabrication

• Sp Iss: Mechanics of AM

A. Lingua, F. Sosa-Rey, N. Piccirelli, D. Therriault, M. Lévesque

Analysis of Deformation Mechanisms in Metal Extrusion of 17–4 PH Stainless Steel: Influence of Layer Thickness and Contour Number

• Sp Iss: Mechanics of AM

J. Marae Djouda, M. Ali Bouaziz, F. Hild

A Comparative Study of the Modal Response of Additively and Subtractively Manufactured Thin Plates After Thermal Loading

• Open Access
• Sp Iss: Mechanics of AM

M. Weihrauch, P. Lambert, J. Lambros, C. J. Sutcliffe, E. A. Patterson

Analysis and Comparison of the Projectile Impact Response of an Electron Beam Melt-Ti64 Body Centered Cubic Lattice-Cored Sandwich Plate

• Open Access
• Sp Iss: Mechanics of AM

H. İ. Erten, G. Çimen, F. M. Yıldıztekin, M. Güden

Enhancing Interlaminar Shear Strength in Additively Manufactured Carbon Fiber-Reinforced Thermoplastic Composites Through Microstructural Design

• Sp Iss: Mechanics of AM

D. Yavas

Ductile Fracture Modeling of Flaw-Containing Additively Manufactured SS316L: Application to Complex Structures

• Sp Iss: Mechanics of AM

E. T. Furton, A. M. Beese

Dynamic Mechanical Behavior of Sinusoidal Corrugated Dual-Phase Lattice Metamaterials by Additive Manufacturing

• Sp Iss: Mechanics of AM

H. Wang, J. You, Y. Tian, Z. Chen, S. Yin

4D Porosity Evolution in Additively Manufactured 316L Stainless Steel through In-Situ Tensile Testing and X-Ray Computed Tomography

• Open Access
• Sp Iss: Mechanics of AM

D. Hertz-Eichenrode, H. Talebinezhad, A. Shmatok, R.D. Fischer, S. Bremen, W. Reichert, B.C. Prorok

Mechanical Characterization of Additive-Manufactured Ti-6Al-4V Processed via Bound Metal Deposition

• Sp Iss: Mechanics of AM

E. Devine, M. Lester, T. McElroy, T. Valenzuela, W. LePage

Influence of the Specimen Thickness on the Interlayer Shear Strengths of Additively Manufactured Polymers

• Sp Iss: Mechanics of AM

B. Liu, X. Zheng, L.R. Xu