Top

Journal of Materials Engineering and Performance

Published in:

24-08-2018

Experimental Study on the Hot Deformation Characterization of Low-Carbon Nb-V-Ti Microalloyed Steel

Authors: Wenfei Shen, Chi Zhang, Liwen Zhang, Qianhong Xu, Yan Cui

Published in: Journal of Materials Engineering and Performance | Issue 9/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

X80 steel, as typical low-carbon Nb-V-Ti microalloyed steel, is getting more and more attention in oil and gas transmission pipeline manufacturing. In this paper, the hot deformation behavior of X80 steel has been investigated. Hot compression tests of the steel were conducted under different temperatures and strain rates. Based on the experimental data, the flow stress constitutive equations were established. It is found that the hot deformation activation energy of this steel is higher than C-Mn and low-carbon steel. Then, the kinetics model and grain size model of dynamic recrystallization were developed according to the flow curves and the optical microstructures. In addition, the processing maps were developed to analyze the workability of X80 steel at elevated temperature. The analysis results show that the optimum processing window is at the temperature of 1300-1473 K and the strain rate of 0.01-10 s⁻¹. The microstructure observation indicates that the optimum processing parameters are applicable to the tested steel.

previous article Optimization of Hot Deformation Parameters and Constitutive Analysis for As-Cast Mg-5Li-3Zn-0.3Y Alloy Using Processing Maps

next article Synthesis and Characterization of Zeolites for Anti-corrosion Application: The Effect of Precursor and Hydrothermal Treatment

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Y.C. Lin and X.M. Chen, A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working, Mater. Des., 2011, 32, p 1733–1759CrossRef

A. Marandi, A. Zarei-Hanzaki, N. Haghdadi, and M. Eskandari, The Prediction of Hot Deformation Behavior in Fe-21Mn-2.5Si-1.5Al Transformation-Twinning Induced Plasticity Steel, Mater. Sci. Eng., A, 2012, 554, p 72–78CrossRef

E.S. Puchi-Cabrera, M.H. Staia, J.D. Guérin, J. Lesage, M. Dubar, and D. Chicot, An Experimental Analysis and Modeling of the Work-Softening Transient Due to Dynamic Recrystallization, Int. J. Plast, 2014, 54, p 113–131CrossRef

G. Zhou, H. Ding, F. Cao, and B. Zhang, A Comparative Study of Various Flow in Stability Criteria in Processing Map of Superalloy GH4742, J. Mater. Sci. Technol., 2014, 30, p 217–222CrossRef

Y. Zhang, Z. Chai, Alex A. Volinsky, H.L. Sun, B.H. Tian, P. Liu, and Y. Liu, Hot Deformation Characteristics and Processing Maps of the Cu-Cr-Zr-Ag Alloy, J. Mater. Eng. Perform., 2016, 25, p 1191–1198CrossRef

D.X. Wen, Y.C. Lin, J. Chen, J. Deng, X.M. Chen, J.L. Zhang, and M. He, Effects of Initial Aging Time on Processing Map and Microstructures of Anickel-Based Superalloy, Mater. Sci. Eng., A, 2015, 620, p 319–332CrossRef

S.K. Rajput, G.P. Chaudhari, and S.K. Nath, Physical Simulation of Hot Deformation of Low-Carbon Ti-Nb Microalloyed Steel and Microstructural Studies, J. Mater. Eng. Perform., 2014, 23, p 2930–2942CrossRef

C. Zhang, L.W. Zhang, W.F. Shen, C.R. Liu, Y.N. Xia, and R.Q. Li, Study on Constitutive Modeling and Processing Maps for Hot Deformation of Medium Carbon Cr-Ni-Mo Alloyed Steel, Mater. Des., 2016, 90, p 804–814CrossRef

Z.W. Cai, F.X. Chen, F.J. Ma, and J.Q. Guo, Dynamic Recrystallization Behavior and Hot Workability of AZ41 M Magnesium Alloy During Hot Deformation, J. Alloys Compd., 2016, 670, p 55–63CrossRef

10.

T. Niu, Y.L. Kang, H.W. Gu, Y.Q. Yin, M.L. Qiao, and J.X. Jiang, Effect of Nb on the Dynamic Recrystallization Behavior of High-Grade Pipeline Steels, Int. J. Miner. Metall. Mater., 2010, 17, p 742–747CrossRef

11.

G.Y. Qiao, F.R. Xiao, X.B. Zhang, Y.B. Cao, and B. Liao, Effects of Contents of Nb and C on Hot Deformation Behaviors of High Nb X80 Pipeline Steels, Trans. Nonferr. Met. Soc. China, 2009, 19, p 1395–1399CrossRef

12.

A. AlShahrani, N. Yazdipour, A. Dehghan-Manshadi, A.A. Gazder, C. Cayron, and E.V. Perelom, The Effect of Processing Parameters on the Dynamic Recrystallisation Behaviour of API-X70 Pipeline Steel, Mater. Sci. Eng., A, 2013, 570, p 70–81CrossRef

13.

Y.W. Xu, D. Tang, Y. Song, and X.G. Pan, Dynamic Recrystallization Kinetics Model of X70 Pipeline Steel, Mater. Des., 2012, 39, p 168–174CrossRef

14.

L.Y. Lan, C.L. Qiu, D.W. Zhao, X.H. Gao, and L.X. Du, Dynamic and Static Recrystallization Behavior of Low Carbon High Niobium Microalloyed Steel, J. Iron. Steel Res. Int., 2011, 18(1), p 55–60CrossRef

15.

H. Mirzadeh, J.M. Cabrera, and A. Najafizadeh, Constitutive Relationships for Hot Deformation of Austenite, Acta Mater., 2011, 59, p 6441–6448CrossRef

16.

H.L. Wei, G.Q. Liu, H.T. Zhao, and M.H. Zhang, Effect of Carbon Content on Hot Deformation Behaviors of Vanadium Microalloyed Steels, Mater. Sci. Eng., A, 2014, 596, p 112–120CrossRef

17.

H.L. Wei and G.Q. Liu, Effect of Nb and C on the Hot Flow Behavior of Nb Microalloyed Steels, Mater. Des., 2014, 56, p 437–444CrossRef

18.

H.J. McQueen, S. Yue, N.D. Ryan, and E. Fry, Hot Working Characteristics of Steels in Austenitic State, J. Mater. Process. Technol., 1995, 53, p 293–310CrossRef

19.

B.C. Zhao, T. Zhao, G.Y. Li, and Q. Lu, The Kinetics of Dynamic Recrystallization of a Low Carbon Vanadium-Nitride Microalloyed Steel, Mater. Sci. Eng., A, 2014, 604, p 117–121CrossRef

20.

S.-H. Cho, K.-B. Kang, and J.J. Jonas, The Dynamic, Static and Metadynamic Recrystallization of a Nb-Microalloyed Steel, ISIJ Int., 2001, 41(1), p 63–69CrossRef

21.

S.Q. Bao, G. Zhao, C.B. Yu, Q.M. Chang, C.L. Ye, and X.P. Mao, Recrystallization Behavior of a Nb-Microalloyed Steel During Hot Compression, Appl. Math. Model., 2011, 35, p 3268–3275CrossRef

22.

E.I. Poliak and J.J. Joans, A One-Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization, Acta Mater., 1996, 44, p 127–136CrossRef

23.

E.I. Poliak and J.J. Jonas, Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation, ISIJ Int., 2003, 43, p 684–691CrossRef

24.

H.B. Zhang, K.F. Zhang, S.S. Jiang, and Z. Lu, The Dynamic Recrystallization Evolution and Kinetics of Ni-18.3Cr-6.4Co-5.9 W-4Mo-2.19Al-1.16Ti Superalloy During Hot Deformation, J. Mater. Res., 2015, 30(7), p 1029–1041CrossRef

25.

L. Chen, Y.J. Zhang, F. Li, X.G. Liu, B.F. Guo, and M. Jin, Modeling of Dynamic Recrystallization Behavior of 21Cr-11Ni-N-RE Lean Austenitic Heat-Resistant Steel During Hot Deformation, Mater. Sci. Eng., A, 2016, 663, p 141–150CrossRef

26.

H. Mirzadeh, J.M. Cabrera, J.M. Prado, and A. Najafizadeh, Hot Deformation Behavior of a Medium Carbon Microalloyed Steel, Mater. Sci. Eng., A, 2011, 528, p 3876–3882CrossRef

27.

J.J. Jonas, X. Quelennec, L. Jiang, and É. Martin, The Avrami Kinetics of Dynamic Recrystallization, Acta Mater., 2009, 57, p 2748–2756CrossRef

28.

M. Shaban and B. Eghbali, Determination of Critical Conditions for Dynamic Recrystallization of a Microalloyed Steel, Mater. Sci. Eng., A, 2010, 527, p 4320–4325CrossRef

29.

M.H. Wang, Y.F. Li, W.H. Wang, J. Zhou, and A. Chiba, Quantitative Analysis of Work Hardening and Dynamic Softening Behavior of Low Carbon Alloy Steel Based on the Flow Stress, Mater. Des., 2013, 45, p 384–392CrossRef

30.

M. ElWahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado, Effect of Initial Grain Size on Dynamic Recrystallization In High Purity Austenitic Stainless Steels, Acta Mater., 2005, 53, p 4605–4612CrossRef

31.

L.F. Nie, L.W. Zhang, Z. Zhu, and W. Xu, Constitutive Modeling of Dynamic Recrystallization Kinetics and Processing Maps of Solution and Aging FGH96 Superalloy, J. Mater. Eng. Perform., 2013, 22, p 3728–3734CrossRef

32.

Y.V.R.K. Prasad and S. Sasidhara, Hot working Guide: A Compendium of Processing Maps, ASM, Novelty, 1997

33.

Z.N. Yang, F.C. Zhang, C.L. Zheng, M. Zhang, B. Lv, and L. Qu, Study on Hot Deformation Behaviour and Processing Maps of Low Carbon Bainitic Steel, Mater. Des., 2015, 66, p 258–266CrossRef

34.

Z.B. Xiao, Y.C. Huang, and Y. Liu, Plastic Deformation Behaviour and Processing Maps of 35CrMo Steel, J. Mater. Eng. Perform., 2016, 25, p 1219–1227CrossRef

Title: Experimental Study on the Hot Deformation Characterization of Low-Carbon Nb-V-Ti Microalloyed Steel
Authors: Wenfei Shen
Chi Zhang
Liwen Zhang
Qianhong Xu
Yan Cui
Publication date: 24-08-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 9/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3594-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9/2018

Microstructure and Ratcheting Behavior of Additive Manufactured 4043 Aluminum Alloy

Effect of Plane Strain Compression and Subsequent Recrystallization Annealing on Microstructures and Phase Transformation of NiTiFe Shape Memory Alloy

Surface Modification of 304 Stainless Steel by Electro-Spark Deposition

Residual Stresses in Explosively Welded Plates Made of Titanium Grade 12 and Steel with Interlayer

Dynamic Recrystallization and Grain Refinement of Fe-P-C-Si and Fe-P-C-Si-N Steels

A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC

Premium Partners