Top

Published in:

2024 | OriginalPaper | Chapter

Exploring Modal Analysis for Characterizing Impact of Making Process on the Properties of Woods Used in Musical Instruments

Authors : Jérémy Cabaret, Romain Viala

Published in: Topics in Modal Analysis & Parameter Identification, Vol. 9

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This chapter explores the application of modal analysis to assess the impact of making process on the structural properties of maple wood used as sides of quartet family instrument. Specifically, we investigate the effects of a bending process using hot iron and water on the sides of the violin. The mechanical properties are compared before and after bending process at same relative humidity condition. Finite Element Model Updating (FEMU) is employed to identify changes in the longitudinal modulus of elasticity and damping. Our results indicate a weakly significant decrease in longitudinal rigidity, but a significant reduction in longitudinal specific modulus, and a highly significant increase in longitudinal damping, shedding light on the implications for instrument makers.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter On the Application of Vibration Absorbers Based on Acoustic Black Holes to the Handlebar of a Low-Cost Motorcycle

next chapter Modal Testing of Large Wind Turbine Blades

Pyrkosz, M.A. Reverse engineering the structural and acoustic behavior of a Stradivari violin. PhD thesis, Michigan Technological University (2013)

Viala, R. Towards a model-based decision support tool for stringed musical instrument making. PhD thesis, Université Bourgogne Franche-comté (2018)

Büyüksari, Ü. and As, N. “Non-destructive evaluation of beech and oak wood bent at different radii”. Composites Part B: Engineering, 48(May 2021):106–110 (2013)CrossRef

de Peres, M.L., de Ávila Delucis, R., Gatto, D.A., and Beltrame, R. “Mechanical behavior of wood species softened by microwave heating prior to bending”. European Journal of Wood and Wood Products, 74(2):143–149 (2016)CrossRef

As, N., Hindman, D., and Büyüksarı, Ü. “The effect of bending parameters on mechanical properties of bent oak wood”. European Journal of Wood and Wood Products, 76(2):633–641 (2018)CrossRef

Alkadri, A. Wavy sycamore maple: relationships between anatomical, physical, mechanical, and vibrational properties Ahmad Alkadri. PhD thesis, Bogor Agricultural University (2017)

Brémaud, I., Gril, J., and Thibaut, B. “Anisotropy of wood vibrational properties: Dependence on grain angle and review of literature data”. Wood Science and Technology, 45(4):735–754 (2011)CrossRef

Viala, R., Placet, V., and Cogan, S. “Simultaneous non-destructive identification of multiple elastic and damping properties of spruce tonewood to improve grading”. Journal of Cultural Heritage, 42:108–116 (2020)CrossRef

Glišović, I., Pavlović, M., Stevanović, B., and Todorović, M. “Numerical analysis of glulam beams reinforced with CFRP plates”. Journal of Civil Engineering and Management, 23(7):868–879 (2017)CrossRef

10.

Pérez, M.A., Poletti, P., and Gil Espert, L. “Vibration Testing for the Evaluation of the Effects of Moisture Content on the In-Plane Elastic Constants of Wood Used in Musical Instruments”. In Vasques, C. and Dias Rodrigues, J., editors, Vibration and Structural Acoustics Analysis, pages 21–57. Springer Netherlands, Dordrecht (2011)

11.

Simpson, W.T. and TenWolde, A. “Physical Properties and Moisture Relations of Wood”. Technical report, United States Department of Agriculture (1999)

12.

Viala, R., Placet, V., and Cogan, S. “Identification of the anisotropic elastic and damping properties of complex shape composite parts using an inverse method based on finite element model updating and 3D velocity fields measurements (FEMU-3DVF): Application to bio-based composite violin sou”. Composites Part A: Applied Science and Manufacturing, 106(December):91–103 (2018)CrossRef

Title: Exploring Modal Analysis for Characterizing Impact of Making Process on the Properties of Woods Used in Musical Instruments
Authors: Jérémy Cabaret
Romain Viala
Publisher: Springer Nature Switzerland
Book: Topics in Modal Analysis & Parameter Identification, Vol. 9
Print ISBN: 978-3-031-68179-0

Electronic ISBN: 978-3-031-68180-6

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-68180-6_8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"