Skip to main content
Top
Published in:

08-07-2024

Fabrication of multi-reinforced powders for gas-dynamic spraying by powder metallurgy

Authors: A. V. Aborkin, D. M. Babin, D. V. Bokaryov, I. A. Evdokimov, M. I. Alymov

Published in: Metallurgist | Issue 3/2024

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Mechanical synthesis of the powders based on the Al-6Mg nanocrystalline matrix, multi-reinforced with fullerenes (C60) and ceramic particles (AlN), was performed. The effect of the AlN content in the charge, ranging from 10 to 50 wt. %, on the morphology of particles, and the granulometric composition of the synthesized multi-reinforced powders were studied. The structural and phase composition of the synthesized powders was analyzed. The microhardness of the multi-reinforced composite powder particles was measured using kinetic indentation. It was shown that by increasing the concentration of ceramic filler (AlN) from 10 to 50 wt. %, it becomes possible to increase the microhardness of the powder particles by about 12–20% compared with the mono-reinforced composite particles.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Melentiev R, Yu N, Lubineau G (2021) Polymer metallization via cold spray additive manufacturing: a review of process control, coating qualities, and prospective applications. Addit Manuf 48:102459 Melentiev R, Yu N, Lubineau G (2021) Polymer metallization via cold spray additive manufacturing: a review of process control, coating qualities, and prospective applications. Addit Manuf 48:102459
2.
go back to reference Pandian AS, Srinivasan RG, Palani S, Selvam M (2023) Surface modification on AZ31B Mg alloy for improved corrosion resistance and hardness by thermal spray aluminum coating. Mater Today Proc 72:2586–2592CrossRef Pandian AS, Srinivasan RG, Palani S, Selvam M (2023) Surface modification on AZ31B Mg alloy for improved corrosion resistance and hardness by thermal spray aluminum coating. Mater Today Proc 72:2586–2592CrossRef
3.
go back to reference Wu J, Fang H, Kim HJ, Lee C (2006) High speed impact behaviors of Al alloy particle onto mild steel substrate during kinetic deposition. Mater Sci Eng: A 417(1–2):114–119CrossRef Wu J, Fang H, Kim HJ, Lee C (2006) High speed impact behaviors of Al alloy particle onto mild steel substrate during kinetic deposition. Mater Sci Eng: A 417(1–2):114–119CrossRef
4.
go back to reference Papyrin A (2001) Cold spray technology. Adv Mater Process 159:49–51 Papyrin A (2001) Cold spray technology. Adv Mater Process 159:49–51
5.
go back to reference Mangalarapu TB, Kumar S, Ramakrishna M, Gandham P, Suresh K (2022) Precipitation behavior of cold sprayed Al6061 coatings. Mater (oxf) 24:101510 Mangalarapu TB, Kumar S, Ramakrishna M, Gandham P, Suresh K (2022) Precipitation behavior of cold sprayed Al6061 coatings. Mater (oxf) 24:101510
6.
go back to reference Hodder KJ, Izadi H, McDonald AG, Gerlich AP (2012) Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing. Mater Sci Eng: A 556:114–121CrossRef Hodder KJ, Izadi H, McDonald AG, Gerlich AP (2012) Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing. Mater Sci Eng: A 556:114–121CrossRef
7.
go back to reference Sansoucy E, Marcoux P, Ajdelsztajn L, Jodoin B (2008) Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process. Surf Coat Technol 202(16):3988–3996CrossRef Sansoucy E, Marcoux P, Ajdelsztajn L, Jodoin B (2008) Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process. Surf Coat Technol 202(16):3988–3996CrossRef
8.
go back to reference Huang C, List A, Wiehler L, Schulze M, Gärtner F, Klassen T (2022) Cold spray deposition of graded Al-SiC composites. Addit Manuf 59:103116 Huang C, List A, Wiehler L, Schulze M, Gärtner F, Klassen T (2022) Cold spray deposition of graded Al-SiC composites. Addit Manuf 59:103116
9.
go back to reference Zhao L, Tariq NU, Ren Y, Liu H, Han R, Cui X, Wang J, Xiong T (2022) Effect of particle size on ceramic particle content in cold sprayed Al-based metal matrix composite coating. J Therm Spray Tech 31:2505–2516CrossRef Zhao L, Tariq NU, Ren Y, Liu H, Han R, Cui X, Wang J, Xiong T (2022) Effect of particle size on ceramic particle content in cold sprayed Al-based metal matrix composite coating. J Therm Spray Tech 31:2505–2516CrossRef
10.
go back to reference Chesnokov AE, Smirnov AV, Klinkov SV, Kosarev VF (1945) Preparation of the composite powder Al–B4C by ball milling for cold spray. Phys: Conf Ser 012033(2021) Chesnokov AE, Smirnov AV, Klinkov SV, Kosarev VF (1945) Preparation of the composite powder Al–B4C by ball milling for cold spray. Phys: Conf Ser 012033(2021)
11.
go back to reference Balog M, Krizik P, Dvorak J, Bajana O, Krajcovic J, Drienovsky M (2022) Industrially fabricated in-situ Al-AlN metal matrix composites (part B): the mechanical, creep, and thermal properties. J Alloys Compd 909:164720CrossRef Balog M, Krizik P, Dvorak J, Bajana O, Krajcovic J, Drienovsky M (2022) Industrially fabricated in-situ Al-AlN metal matrix composites (part B): the mechanical, creep, and thermal properties. J Alloys Compd 909:164720CrossRef
12.
go back to reference Aborkin AV, Alymov MI, Arkhipov VE, Khrenov DS (2018) Formation of Heterogeneous Powder Coatings with a Two-Level Micro-and Nanocomposite Structure under Gas-Dynamic Spraying Conditions. Dokl Phys 63:50–54CrossRef Aborkin AV, Alymov MI, Arkhipov VE, Khrenov DS (2018) Formation of Heterogeneous Powder Coatings with a Two-Level Micro-and Nanocomposite Structure under Gas-Dynamic Spraying Conditions. Dokl Phys 63:50–54CrossRef
13.
go back to reference Xie X, Yin S, Raoelison R, Chen C, Verdy C, Li W, Ji G, Ren Z, Liao H (2021) Al matrix composites fabricated by solid-state cold spray deposition: a critical review. J Mater Sci Technol 86:20–55CrossRef Xie X, Yin S, Raoelison R, Chen C, Verdy C, Li W, Ji G, Ren Z, Liao H (2021) Al matrix composites fabricated by solid-state cold spray deposition: a critical review. J Mater Sci Technol 86:20–55CrossRef
14.
go back to reference Jodoin B, Ajdelsztajn L, Sansoucy E, Zúñiga A, Richer P, Lavernia EJ (2006) Effect of particle size, morphology, and hardness on cold gas dynamic sprayed aluminum alloy coatings. Surf Coat Technol 201(6):3422–3429CrossRef Jodoin B, Ajdelsztajn L, Sansoucy E, Zúñiga A, Richer P, Lavernia EJ (2006) Effect of particle size, morphology, and hardness on cold gas dynamic sprayed aluminum alloy coatings. Surf Coat Technol 201(6):3422–3429CrossRef
15.
go back to reference Meyer M, Caruso F, Lupoi R (2018) Particle velocity and dispersion of high stokes number particles by PTV measurements inside a transparent supersonic cold spray nozzle. Intern J Multiph Flow 106:296–310CrossRef Meyer M, Caruso F, Lupoi R (2018) Particle velocity and dispersion of high stokes number particles by PTV measurements inside a transparent supersonic cold spray nozzle. Intern J Multiph Flow 106:296–310CrossRef
16.
go back to reference Koithara LL, Raoelison RN, Costil S (2020) Flow phenomenon of micron-sized particles during cold spray additive manufacturing: High-speed optic observation and characterization. Adv Powder Technol 31(3):1060–1079CrossRef Koithara LL, Raoelison RN, Costil S (2020) Flow phenomenon of micron-sized particles during cold spray additive manufacturing: High-speed optic observation and characterization. Adv Powder Technol 31(3):1060–1079CrossRef
17.
go back to reference Li W, Assadi H, Gaertner F, Yin S (2018) A review of advanced composite and nanostructured coatings by solid-state cold spraying process. Crit Rev Solid State Mater Sci 44(2):109–156CrossRef Li W, Assadi H, Gaertner F, Yin S (2018) A review of advanced composite and nanostructured coatings by solid-state cold spraying process. Crit Rev Solid State Mater Sci 44(2):109–156CrossRef
18.
go back to reference Aborkin AV, Alymov MI, Kireev AV, Sobol’kov AV, Arkhipov VE (2018) Structure and efficiency of gas-dynamic deposition of hybrid coatings based on a nanocrystalline aluminum matrix. Metallurgist 62(7–8):809–814CrossRef Aborkin AV, Alymov MI, Kireev AV, Sobol’kov AV, Arkhipov VE (2018) Structure and efficiency of gas-dynamic deposition of hybrid coatings based on a nanocrystalline aluminum matrix. Metallurgist 62(7–8):809–814CrossRef
19.
go back to reference Aborkin AV, Arkhipov VE, Sachkova NV, Sychev AE, Alymov MI (2019) Effect of Al2O3 on the microhardness of AMg2/graphite nanocomposite powder gas dynamic coatings on aluminum alloys. Metal Science and Heat Treatment (61):360–365 Aborkin AV, Arkhipov VE, Sachkova NV, Sychev AE, Alymov MI (2019) Effect of Al2O3 on the microhardness of AMg2/graphite nanocomposite powder gas dynamic coatings on aluminum alloys. Metal Science and Heat Treatment (61):360–365
20.
go back to reference Popov VA (2015) X‑ray micro-absorption enhancement for nonagglomerated nanodiamonds in mechanically alloyed aluminum matrix composites. Phys Status Solidi (a) 212(12):2722–2726CrossRef Popov VA (2015) X‑ray micro-absorption enhancement for nonagglomerated nanodiamonds in mechanically alloyed aluminum matrix composites. Phys Status Solidi (a) 212(12):2722–2726CrossRef
Metadata
Title
Fabrication of multi-reinforced powders for gas-dynamic spraying by powder metallurgy
Authors
A. V. Aborkin
D. M. Babin
D. V. Bokaryov
I. A. Evdokimov
M. I. Alymov
Publication date
08-07-2024
Publisher
Springer US
Published in
Metallurgist / Issue 3/2024
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-024-01745-y

Premium Partners