Top

Journal of Coatings Technology and Research

Published in:

24-08-2017

Fabrication of thermally stable porous films from a cured epoxy resin via the Breath Figures process

Authors: Mikhail A. Soldatov, Maria S. Parshina, Veronika V. Makarova, Olga A. Serenko, Aziz M. Muzafarov

Published in: Journal of Coatings Technology and Research | Issue 1/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In the current work, porous films based on epoxy resin have been obtained via the Breath Figures method. It was shown that the use of a low-temperature curing agent and fluoro-containing organosilicon copolymer, compatible with epoxy resin, makes it possible to obtain porous, thermostable, highly hydrophobic coatings with a pore diameter of 3–4 µm. When the epoxy resin/copolymer mixture is homogenous, the modifier prevents water droplet coalescence; otherwise, the mixture becomes heterogeneous, and the positive influence of the modifier is lost. The obtained modified porous films are highly hydrophobic and maintain their porous structure until polymer devitrification occurs. The simplicity of the Breath Figures method shows great potential for the manufacture of water-repellent paint coatings based on epoxy resin for use in a variety of applications.

previous article Synthesis of acrylate-based UV/thermal dual-cure coatings for antifogging

next article Fabrication and characterization of polysiloxane/polyacrylate composite latexes with balanced water vapor permeability and mechanical properties: effect of silane coupling agent

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Moreau, WM, Semiconductor Lithography: Principles, Practices and Materials. Springer, New York (1988)CrossRef

Joannopoulos, JD, Johnson, SG, Winn, JN, Meade, RD, Photonic Crystals: Molding the Flow of Light, 2nd ed. Princeton University Press, Princeton, NJ (2008)

Sun, F, Meng, M, Yan, L, He, Z, Yan, Y, Liu, Y, Liu, S, “Fabrication of Ordered Microporous Styreneacrylonitrile Copolymer Blend Imprinted Membranes for Selective Adsorption of Phenol from Salicylic Acid Using Breath Figure Method.” J. Appl. Polym. Sci., 132 42350 (2015)

Brown, PS, Talbot, EL, Wood, TJ, Bain, CD, Badyal, JPS, “Superhydrophobic Hierarchical Honeycomb Surfaces.” Langmuir, 28 13712–13719 (2012)CrossRef

Zhang, D, Wang, L, Qian, H, Li, X, “Superhydrophobic Surfaces for Corrosion Protection: A Review of Recent Progresses and Future Directions.” J. Coat. Technol. Res., 13 11–29 (2016)CrossRef

Malkin, AY, “Surface Instabilities.” Colloid J., 70 673–689 (2008)CrossRef

Srinivasarao, M, Collings, D, Philips, A, Patel, S, “Three-Dimensionally Ordered Array of Air Bubbles in a Polymer Film.” Science, 292 79–83 (2001)CrossRef

Stenzel, MH, Barner-Kowollik, C, Davis, TP, “Formation of Honeycomb-Structured, Porous Films via Breath Figures with Different Polymer Architectures.” J. Polym. Sci. Part A Polym. Chem., 44 2363–2375 (2006)CrossRef

Bai, H, Du, C, Zhang, A, Li, L, “Breath Figure Arrays: Unconventional Fabrications, Functionalizations, and Applications.” Angew. Chem. Int. Ed., 52 12240–12255 (2013)CrossRef

10.

Zhang, A, Bai, H, Li, L, “Breath Figure: A Nature-Inspired Preparation Method for Ordered Porous Films.” Chem. Rev., 115 9801–9868 (2015)CrossRef

11.

Wong, KH, Hernandez-Guerrero, M, Granville, AM, Davis, TP, Barner-Kowollik, C, Stenzel, MH, “Water-Assisted Formation of Honeycomb Structured Porous Films.” J. Porous Mater., 13 213–223 (2006)CrossRef

12.

Fukuhira, Y, Yabu, H, Ijiro, K, Shimomura, M, “Interfacial Tension Governs the Formation of Self-Organized Honeycomb-Patterned Polymer Films.” Soft Matter, 5 2037–2041 (2009)CrossRef

13.

Bolognesi, A, Mercogliano, C, Yunus, S, Civardi, M, Comoretto, D, Turturro, A, “Self-Organization of Polystyrenes into Ordered Microstructured Films and Their Replication by Soft Lithography.” Langmuir, 21 3480–3485 (2005)CrossRef

14.

Pilati, F, Montecchi, M, Fabbri, P, Synytska, A, Messori, M, Toselli, M, Grundke, K, Pospiech, D, “Design of Surface Properties of PET Films: Effect of Fluorinated Block Copolymers.” J. Colloid Interface Sci., 315 210–222 (2007)CrossRef

15.

Messori, M, Toselli, M, Pilati, F, Tonelli, C, “Unsaturated Polyester Resins Modified with Poly(ε-Caprolactone)–Perfluoropolyethers Block Copolymers.” Polymer, 42 9877–9885 (2001)CrossRef

16.

Messori, M, Toselli, M, Pilati, F, Fabbri, P, Tonelli, C, “Poly(ε-caprolactone)–Poly(fluoroalkyleneoxide)–Poly(ε-caprolactone) Block Copolymers as Surface Modifiers of Poly(vinyl chloride).” Surf. Coat. Int. Part B Coat. Trans., 85 197–201 (2002)CrossRef

17.

Fabbri, P, Messori, M, Montecch, M, Nannarone, S, Pasquali, L, Pilati, F, Tonelli, C, Toselli, M, “Perfluoropolyether-Based Organic–Inorganic Hybrid Coatings.” Polymer, 47 1055–1062 (2006)CrossRef

18.

Pilati, F, Toselli, M, Priola, A, Bongiovanni, R, Malucelli, G, Tonelli, C, “Poly(ε-caprolactone)–Poly(fluoroalkylene oxide)–Poly(ε-caprolactone) Block Copolymers. 1. Synthesis and Molecular Characterization.” Macromolecules, 32 6969–6976 (1999)CrossRef

19.

Li, L, Zhong, Y, Gong, J, Li, J, Huang, J, Ma, Z, “Fabrication of Robust Micro-Patterned Polymeric Films via Static Breath-Figure Process and Vulcanization.” J. Colloid Interface Sci., 354 758–764 (2011)CrossRef

20.

Kabuto, T, Hashimoto, Y, Karthaus, O, “Thermally Stable and Solvent Resistant Mesoporous Honeycomb Films from a Crosslinkable Polymer.” Adv. Func. Mater., 17 3569–3573 (2007)CrossRef

21.

Soldatov, MA, Sheremetyeva, NA, Kalinina, AA, Demchenko, NV, Serenko, OA, Muzafarov, AM, “Synthesis of Fluorine-Containing Organosilicon Copolymers and Their Use for The Preparation of Stable Hydrophobic Coatings Based on the Epoxy Binder.” Russ. Chem. Bull., 63 267–272 (2014)CrossRef

22.

Malkin, AY, Chalykh, AE, Kovriga, VV, Askadsky, AA, Experimental Methods of Polymer Physics (Measurement of Mechanical Properties, Viscosity and Diffusion). Mir Publishers, Moscow (1983)

23.

Makarova, V, Kulichikhin, V, “Application of Interferometry to Analysis of Polymer–Polymer and Polymer–Solvent Interactions.” In: Padron, I (ed.) Interferometry—Research and Applications in Science and Technology. InTech Open Access Publisher, Rijeka (2011)

24.

Naumkin, AV, Soldatov, MA, Streltsov, DR, Pereyaslavtsev, AY, Volkov, IO, Pertsin, AI, “Organosilicon Fluoro-Containing Polymer Brushes Based on Epoxy Matrix: XPS Analysis.” Russ. Chem. Bull., 65 1072–1075 (2016)CrossRef

25.

Gliemann, H, Tavares Almeida, A, Freitas, D, Petri, S, Schimmel, T, “Nanostructure Formation in Polymer Thin Films Influenced by Humidity.” Surf. Interface Anal., 39 1–8 (2007)CrossRef

26.

Munoz-Bonilla, A, Ibarboure, E, Papon, E, Rodriguez-Hernandez, J, “Engineering Polymer Surfaces with Variable Chemistry and Topography.” J. Polym. Sci. Part A Polym. Chem., 47 2262–2271 (2009)CrossRef

27.

Xue, L, Zhang, J, Han, Y, “Phase Separation Induced Ordered Patterns in Thin Polymer Blend Films.” Prog. Polym. Sci., 37 564–594 (2012)CrossRef

Title: Fabrication of thermally stable porous films from a cured epoxy resin via the Breath Figures process
Authors: Mikhail A. Soldatov
Maria S. Parshina
Veronika V. Makarova
Olga A. Serenko
Aziz M. Muzafarov
Publication date: 24-08-2017
Publisher: Springer US
Published in: Journal of Coatings Technology and Research / Issue 1/2018
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-017-9968-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2018

One-pot fabrication of robust hydrophobia and superoleophilic cotton fabrics for effective oil-water separation

Synthesis of core–shell-type styrene acrylic latexes with low NMA content and their application in pigment printing pastes

Study of ionic/nonionic polyurethane dispersions with high solid content and low viscosity using a complex hydrophilic chain-extending agent

Protective coatings for offshore wind energy devices (OWEAs): a review

Wettability and bonding quality of exterior coatings on jabon and sengon wood surfaces

Structure–property correlations of foul release coatings based on low hard segment content poly(dimethylsiloxane–urethane–urea)

Premium Partners