Skip to main content
Top

2022 | OriginalPaper | Chapter

3. Flexible Spinning Forming Technology

Authors : Yizhou Shen, Chunmei Liu, Zijie Wang, Jie Tao, Shixuan Liu, Qiwei Yuan, Bo Li, Jianhua Wang

Published in: Flexible Metal Forming Technologies

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

As an advanced technology of metal plastic forming, flexible spinning forming technology has become the core processing method of small batch and multi variety symmetrical and asymmetric rotating hollow thin-walled parts. At present, it has been widely used in the field of metal precision processing, such as aerospace, military industry, nuclear energy, shipbuilding and so on. Based on the basic principle of spinning, the forming processes of thin-walled and revolving body components of spinning forming, bimetallic composite tube of spinning forming and power spinning of thin-walled components are studied by using the combination of numerical simulation and experiment, and finally the spinning parts with excellent forming quality are obtained.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Lei F (2016) The research of multi-pass plan and variable feed spinning method of curvilinear generatrix parts based on bending amount. Zhejiang University, Hangzhou Lei F (2016) The research of multi-pass plan and variable feed spinning method of curvilinear generatrix parts based on bending amount. Zhejiang University, Hangzhou
2.
go back to reference Murata M, Kuboki T (2015) 60 Excellent inventions in metal forming. Springer, Berlin Heidelberg Murata M, Kuboki T (2015) 60 Excellent inventions in metal forming. Springer, Berlin Heidelberg
3.
go back to reference Wang C (1986) Spinning technology. China Machine Press, Beijing Wang C (1986) Spinning technology. China Machine Press, Beijing
4.
go back to reference Xia Q, Xiao G, Long H et al (2014) A review of process advancement of novel metal spinning. Int J Mach Tool Manu 85:100–121CrossRef Xia Q, Xiao G, Long H et al (2014) A review of process advancement of novel metal spinning. Int J Mach Tool Manu 85:100–121CrossRef
5.
go back to reference Awiszus B, Meyer F (2005) Metal spinning of non-circular hollow parts. In: Proceedings of the eighth international conference on technology of plasticity, Verona, Italy, 2005, pp 353–355 Awiszus B, Meyer F (2005) Metal spinning of non-circular hollow parts. In: Proceedings of the eighth international conference on technology of plasticity, Verona, Italy, 2005, pp 353–355
6.
go back to reference Awiszus B, Hartel S (2011) Numerical simulation of non-circular spinning: a rotationally non-symmetric spinning process. Prod Eng-Res Dev 5(6):605–612CrossRef Awiszus B, Hartel S (2011) Numerical simulation of non-circular spinning: a rotationally non-symmetric spinning process. Prod Eng-Res Dev 5(6):605–612CrossRef
7.
go back to reference Xia Q, Cheng X (2010) Spinning forming method and equipment of non-circular section parts: China, ZL200810219517.4, 2010-9-1 Xia Q, Cheng X (2010) Spinning forming method and equipment of non-circular section parts: China, ZL200810219517.4, 2010-9-1
8.
go back to reference Xia Q (2017) Special spinning technology. Science Press, Beijing Xia Q (2017) Special spinning technology. Science Press, Beijing
9.
go back to reference Schmoeckel D, Hauk S (2000) Tooling and process control for splitting of disk blanks. J Mater Process Tech 98(1):65–69CrossRef Schmoeckel D, Hauk S (2000) Tooling and process control for splitting of disk blanks. J Mater Process Tech 98(1):65–69CrossRef
10.
go back to reference Wei Z, Li X, Zhang T et al (2016) Research on thinning spinning flaring for thin-walled tube. Forg Stamp Technol 41(12):137–141 Wei Z, Li X, Zhang T et al (2016) Research on thinning spinning flaring for thin-walled tube. Forg Stamp Technol 41(12):137–141
11.
go back to reference Zhao B (2013) Research on the load and drum of thin walled tube during the spinning process. Central South University, Changsha Zhao B (2013) Research on the load and drum of thin walled tube during the spinning process. Central South University, Changsha
12.
go back to reference Deng R (2011) Research on deformation stability of nickel base alloy thin wall cylinder with large diameter thickness ratio during spinning. Central South University, Changsha Deng R (2011) Research on deformation stability of nickel base alloy thin wall cylinder with large diameter thickness ratio during spinning. Central South University, Changsha
13.
go back to reference Lu D, Zhang L, Pu S et al (2015)Effect of process parameters on damage during spinning forming of 304 stainless steel conical parts. Hot Work Technol 44(11):162–165 Lu D, Zhang L, Pu S et al (2015)Effect of process parameters on damage during spinning forming of 304 stainless steel conical parts. Hot Work Technol 44(11):162–165
14.
go back to reference Zhan M, Yang H, Zhang JH et al (2007) 3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning. J Mater Process Tech 187–188(12):486–491CrossRef Zhan M, Yang H, Zhang JH et al (2007) 3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning. J Mater Process Tech 187–188(12):486–491CrossRef
15.
go back to reference Xu S, Wang X (2000) Research and progress for friction factor testing in sheet metal forming. J Plastic Eng 7(2):40–43 Xu S, Wang X (2000) Research and progress for friction factor testing in sheet metal forming. J Plastic Eng 7(2):40–43
16.
go back to reference Ma J, Yang H, Li H et al (2015) Tribological behaviors between commercial pure Titanium sheet and tools in warm forming. T Nonferr Metal Soc 25(9):2924–2931CrossRef Ma J, Yang H, Li H et al (2015) Tribological behaviors between commercial pure Titanium sheet and tools in warm forming. T Nonferr Metal Soc 25(9):2924–2931CrossRef
17.
go back to reference Ma F, Yang H, Zhan M (2010) Plastic deformation behaviors and their application in power spinning process of conical parts with transverse inner rib. J Mater Process Tech 210(1):180–189CrossRef Ma F, Yang H, Zhan M (2010) Plastic deformation behaviors and their application in power spinning process of conical parts with transverse inner rib. J Mater Process Tech 210(1):180–189CrossRef
18.
go back to reference Sun LY, Ye BY, Xia QX et al (2011) Analysis on forming characteristics of cup-shaped thin-walled inner gear spinning. Key Eng Mat 455:544–547CrossRef Sun LY, Ye BY, Xia QX et al (2011) Analysis on forming characteristics of cup-shaped thin-walled inner gear spinning. Key Eng Mat 455:544–547CrossRef
19.
go back to reference Mohebbi MS, Akbarzadeh A (2010) A novel spin-bonding process for manufacturing multilayered clad tubes. J Mater Process Tech 210(3):510–517CrossRef Mohebbi MS, Akbarzadeh A (2010) A novel spin-bonding process for manufacturing multilayered clad tubes. J Mater Process Tech 210(3):510–517CrossRef
20.
go back to reference Mohebbi MS, Akbarzadeh A (2010) Accumulative spin-bonding (ASB) as a novel SPD process for fabrication of nanostructured tubes. Mat Sci Eng A 528(1):180–188CrossRef Mohebbi MS, Akbarzadeh A (2010) Accumulative spin-bonding (ASB) as a novel SPD process for fabrication of nanostructured tubes. Mat Sci Eng A 528(1):180–188CrossRef
21.
go back to reference Mohebbi MS, Akbarzadeh A (2011) Fabrication of copper/aluminum composite tubes by spin-bonding process: experiments and modeling. Int J Adv Manuf Tech 54(9–12):1043–1055CrossRef Mohebbi MS, Akbarzadeh A (2011) Fabrication of copper/aluminum composite tubes by spin-bonding process: experiments and modeling. Int J Adv Manuf Tech 54(9–12):1043–1055CrossRef
22.
go back to reference Samandari M, Abrinia K, Akbarzadeh A et al (2017) (2017) Properties and mechanism of Al/St bimetal tube bonding produced by cold spin-bonding (CSB) process. T Indian I Metals 9–12:1–10 Samandari M, Abrinia K, Akbarzadeh A et al (2017) (2017) Properties and mechanism of Al/St bimetal tube bonding produced by cold spin-bonding (CSB) process. T Indian I Metals 9–12:1–10
23.
go back to reference Pan Y (2012) Research on the process of bimetallic composite tube by spinning. Harbin Institute of Technology, Harbin Pan Y (2012) Research on the process of bimetallic composite tube by spinning. Harbin Institute of Technology, Harbin
24.
go back to reference Zhang Z, Xu W, Shan D (2014) An analytical model on spin-bonding of composite tube. Proc Eng 81:2024–2029CrossRef Zhang Z, Xu W, Shan D (2014) An analytical model on spin-bonding of composite tube. Proc Eng 81:2024–2029CrossRef
25.
go back to reference Akkus N, Kawahara M (2006) An experimental and analytical study on dome forming of seamless Al tube by spinning process. J Mater Process Tech 173(2):145–150CrossRef Akkus N, Kawahara M (2006) An experimental and analytical study on dome forming of seamless Al tube by spinning process. J Mater Process Tech 173(2):145–150CrossRef
26.
go back to reference Lexian H, Dariani BM (2008) An analytical contact model for finite element analysis of tube spinning process. Proc I Mech Eng Part 222(11):1375–1385CrossRef Lexian H, Dariani BM (2008) An analytical contact model for finite element analysis of tube spinning process. Proc I Mech Eng Part 222(11):1375–1385CrossRef
27.
go back to reference Kwiatkowski L, Tekkaya AE, Kleiner M (2013) Fundamentals for controlling thickness and surface quality during dieless necking-in of tubes by spinning. Cirp Ann-Manuf Techn 62(1):299–302CrossRef Kwiatkowski L, Tekkaya AE, Kleiner M (2013) Fundamentals for controlling thickness and surface quality during dieless necking-in of tubes by spinning. Cirp Ann-Manuf Techn 62(1):299–302CrossRef
28.
go back to reference Zoghi H, Arezoodar AF, Enhanced SM (2013) Finite element analysis of material deformation and strain distribution in spinning of 42CrMo steel tubes at elevated temperature. Mater Design 47(9):234–242CrossRef Zoghi H, Arezoodar AF, Enhanced SM (2013) Finite element analysis of material deformation and strain distribution in spinning of 42CrMo steel tubes at elevated temperature. Mater Design 47(9):234–242CrossRef
29.
go back to reference Kuang W, Xia Q, Ruan F (2006) Defection and process study on thin-wall aluminum tube neck-spinning. Light Alloy Fab Technol 34(4):25–28 Kuang W, Xia Q, Ruan F (2006) Defection and process study on thin-wall aluminum tube neck-spinning. Light Alloy Fab Technol 34(4):25–28
30.
go back to reference Cheng X, Chen J, Xia et al (2007) Finite element numerical simulation and experimental study on reducing spinning pressure of coreless die. J Plastic Eng 14(5):38–42 Cheng X, Chen J, Xia et al (2007) Finite element numerical simulation and experimental study on reducing spinning pressure of coreless die. J Plastic Eng 14(5):38–42
31.
go back to reference Xia Q, Shang Y, Zhang S et al (2008) Numerical simulation and experimental investigation on the multi-pass neck-spinning of non-axisymmetric oblique tube. Chin J Mech Eng 44(8):78–84 Xia Q, Shang Y, Zhang S et al (2008) Numerical simulation and experimental investigation on the multi-pass neck-spinning of non-axisymmetric oblique tube. Chin J Mech Eng 44(8):78–84
32.
go back to reference Xia Q, Xie S, Huo Y et al (2008) Numerical simulation and experimental research on the multi-pass neck-spinning of non-axisymmetric offset tube. J Mater Process Tech 206(1–3):500–508CrossRef Xia Q, Xie S, Huo Y et al (2008) Numerical simulation and experimental research on the multi-pass neck-spinning of non-axisymmetric offset tube. J Mater Process Tech 206(1–3):500–508CrossRef
33.
go back to reference Xia Q, Cheng X, Long H et al (2012) Finite element analysis and experimental investigation on deformation mechanism of non-axisymmetric tube spinning. Int J Adv Manuf Tech 59(1–4):263–272CrossRef Xia Q, Cheng X, Long H et al (2012) Finite element analysis and experimental investigation on deformation mechanism of non-axisymmetric tube spinning. Int J Adv Manuf Tech 59(1–4):263–272CrossRef
34.
go back to reference Xue Z, Ren Y, Luo W et al (2016) Effect of feed speed on aluminum alloy pipe neck-spinning process and deformation analysis via simulation. In: MATEC web of conference, vol 67, p 05011 Xue Z, Ren Y, Luo W et al (2016) Effect of feed speed on aluminum alloy pipe neck-spinning process and deformation analysis via simulation. In: MATEC web of conference, vol 67, p 05011
35.
go back to reference Yao J, Makoto M (2002) Effects of indented feed of roller tool on parallel spinning of circular aluminum tube. J Mater Process Tech 128(1):274–279 Yao J, Makoto M (2002) Effects of indented feed of roller tool on parallel spinning of circular aluminum tube. J Mater Process Tech 128(1):274–279
Metadata
Title
Flexible Spinning Forming Technology
Authors
Yizhou Shen
Chunmei Liu
Zijie Wang
Jie Tao
Shixuan Liu
Qiwei Yuan
Bo Li
Jianhua Wang
Copyright Year
2022
Publisher
Springer Nature Singapore
DOI
https://doi.org/10.1007/978-981-19-1348-8_3

Premium Partners