Top

Published in:

2021 | OriginalPaper | Chapter

Fog Computing and Convolutional Neural Network Enabled Prognosis for Machining Process Optimization

Authors : Y. C. Liang, W. D. Li, X. Lu, S. Wang

Published in: Data Driven Smart Manufacturing Technologies and Applications

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cloud enabled prognosis systems have been increasingly adopted by manufacturing industries. The effectiveness of the cloud systems is, however, crippled by the high latency of data transfer between shop floors and the cloud. To overcome the limitation, this chapter presents an innovative fog enabled prognosis system for machining process optimization. The system functions include: (1) dynamic prognosis - Convolutional Neural Network (CNN) based prognosis is implemented to detect potential faults from customized machining processes. Pre-processing mechanisms of the CNN are designed for partitioning and de-noising monitored signals to strengthen the performance of the system in practical manufacturing situations; (2) an innovative fog enabled prognosis architecture for machining process optimization—it consists of a terminal layer, a fog layer and a cloud layer to minimize data traffic and improve system efficiency. Under the architecture, monitored signals during machining collected on the terminal layer are processed using the trained CNN deployed on the fog layer to efficiently detect abnormal situations. Intensive computing activities like training of the CNN and system re-optimization responding to detected faults are carried out dynamically on the cloud layer to leverage its computation powers. The system was validated in a UK machining company. With the system deployment, the efficiency of energy and production was improved for 29.25% and 16.50% on average. In comparison with a cloud system, this fog system achieved 70.26% reduction in the bandwidth requirement between shop floors and cloud, and 47.02% reduction in data transfer time. This research, sponsored by EU projects, demonstrates that industrial artificial intelligence can facilitate smart manufacturing practices effectively.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Introduction

next chapter Big Data Enabled Intelligent Immune System for Energy Efficient Manufacturing Management

Lee J, Wu F, Zhao W, Ghaffari M, Liao L, Siegel D (2014) Prognostics and health management design for rotary machinery systems - Reviews, methodology and applications. Mech Syst Signal Process 42(1–2):314–334CrossRef

Gao R, Wang LH, Teti R, Dornfeld D, Kumara S, Mori M, Helu M (2015) Cloud XE “Cloud” -enabled prognosis for manufacturing. CIRP Ann 64(2):749–772CrossRef

Tao F, Qi Q, Liu A, Kusiak A (2018) Data-driven smart manufacturing. J Manufact Syst 48:157–169

Baccarelli E, Naranjo P, Scarpiniti M, Shojafar M, Abawajy J (2017) Fog XE “Fog” of everything: Energy-efficient networked computing architectures, research challenges, and a case study. IEEE Access 5:9882–9910CrossRef

Hu P, Dhelim S, Ning H, Qiu T (2017) Survey on fog computing: Architecture, key technologies, applications and open issues. J Network Comput Appl 98:27–42CrossRef

Mukherjee M, Shu L, Wang D (2018) Survey of fog computing: Fundamental, network applications, and research challenges. IEEE Communications Surveys & Tutorials. pp 1–1

Wu D, Liu S, Zhang L, Terpenny J, Gao R, Kurfess T, Guzzo J (2017) A fog computing-based framework for process monitoring and prognosis in cyber-manufacturing. J Manufact Syst 43:25–34

Lin C, Yang J (2018) Cost-efficient deployment of fog computing systems at logistics centres in Industry 4.0. IEEE Trans Ind Inform 14(10):4603–4611

Wan J, Chen B, Wang S, Xia M, Li D, Liu C (2018) Fog XE “Fog” computing XE “Fog computing” for energy-aware load balancing and scheduling in smart factory. IEEE Trans Industr Inf 14(10):4548–4556CrossRef

10.

O'Donovan P, Gallagher C, Bruton K, O'Sullivan D (2018) A fog computing industrial cyber-physical system for embedded low-latency machine learning Industry 4.0 applications. Manufact Lett 15:139–142

11.

Mohamed N, Al-Jaroodi J, Jawhar I (2018) Utilizing fog computing for multi-robot systems. 2018 Second IEEE International Conference on Robotic Computing (IRC), CA, USA, January 31–February 2

12.

Liu R, Yang B, Zio E, Chen X (2018) Artificial intelligence for fault diagnosis of rotating machinery: A review. Mech Syst Signal Process 108:33–47CrossRef

13.

Wang J, Ma Y, Zhang L, Gao RX, Wu D (2018) Deep learning for smart manufacturing: Methods and applications. J Manufact Syst 48:144–156

14.

Zhao R, Yan R, Chen Z, Mao K, Wang P, Gao RX (2018) Deep learning XE “Deep learning” and its applications to machine health monitoring. Mech Syst Signal Process 115:213–237CrossRef

15.

Tian J, Morillo C, Azarian MH, Pecht M (2016) Motor bearing fault detection using spectral kurtosis-based feature extraction coupled with k-nearest neighbor distance analysis. IEEE Trans Industr Electron 63(3):1793–1803CrossRef

16.

Zhou Z, Wen C, Yang C (2016) Fault isolation based on k-nearest neighbor rule for industrial processes. IEEE Trans Industr Electron 63(4):2578–2586

17.

Li F, Wang J, Tang B, Tian D (2014) Life grade recognition method based on supervised uncorrelated orthogonal locality preserving projection and k-nearest neighbor classifier. Neurocomputing 138:271–282CrossRef

18.

Li C, Sanchez R-V, Zurita G, Cerrada M, Cabrera D, Vasquez RE (2015) Multimodal deep support vector classification with homologous features and its application to gearbox fault diagnosis. Neurocomputing 168:119–127CrossRef

19.

Zhou J, Yang Y, Ding S, Zi Y, Wei M (2018) A fault detection and health monitoring scheme for ship propulsion systems using SVM technique. IEEE Access 6:16207–16215CrossRef

20.

Zhang D, Qian L, Mao B, Huang C, Huang B, Si Y (2018) A data-driven design for fault detection of wind turbines using random forests and XGboost. IEEE Access 6:21020–21031CrossRef

21.

Abdullah A (2018) Ultrafast transmission line fault detection using a DWT-based ANN XE “ANN” . IEEE Trans Ind Appl 54(2):1182–1193MathSciNetCrossRef

22.

Luo B, Wang H, Liu H, Li B, Peng F (2019) Early fault detection of machine tools based on deep learning and dynamic identification. IEEE Trans Industr Electron 66(1):509–518CrossRef

23.

Ince T, Kiranyaz S, Eren L, Askar M, Gabbouj M (2016) Real-time motor fault detection by 1-D convolutional neural networks. IEEE Trans Industr Electron 63(11):7067–7075CrossRef

24.

Xia M, Li T, Xu L, Liu L, de Silva CW (2018) Fault diagnosis for rotating machinery using multiple sensor and convolutional neural networks. IEEE/ASME Trans Mechatron 23(1):101–110CrossRef

25.

Liu Z, Guo Y, Sealy M, Liu Z (2016) Energy consumption and process sustainability of hard milling with tool wear progression. J Mater Process Technol 229:305–312CrossRef

26.

Sealy M, Liu Z, Zhang D, Guo Y, Liu Z (2016) Energy consumption and modeling in precision hard milling. J Clean Product 135:1591–1601CrossRef

27.

Chooruang K, Mangkalakeeree P (2016) Wireless heart rate monitoring system using MQTT. Procedia Comput Sci 86:160–163CrossRef

28.

Schmitt A, Carlier F, Renault V (2018) Dynamic bridge generation for IoT data exchange via the MQTT protocol. Procedia Comput Sci 130:90–97CrossRef

29.

Liang YC, Li WD, Wang S, Lu X (2019) Big Data based dynamic scheduling optimization for energy efficient machining. Engineering 5:646–652CrossRef

30.

Wang S, Liang YC, Li WD, Cai X (2018) Big data enabled intelligent immune system for energy efficient manufacturing management. J Clean Product 195:507–520CrossRef

31.

Franc V, Čech J (2018) Learning CNN XE “CNN” s XE “CNNs” from weakly annotated facial images. Image Vis Comput 77:10–20CrossRef

32.

Banerjee S, Das S (2018) Mutual variation of information on transfer-CNN XE “CNN” for face recognition with degraded probe samples. Neurocomputing 310:299–315CrossRef

33.

Liang YC, Lu X, Li WD, Wang S (2018) Cyber Physical System and Big Data enabled energy efficient machining optimization. J Clean Product 187:46–62CrossRef

34.

Liu Q, Qin S, Chai T (2013) Decentralized fault diagnosis of continuous annealing processes based on multilevel PCA XE “ principle component analysis (PCA) “. IEEE Trans Autom Sci Eng 10(3):687–698CrossRef

35.

Guo Y, Li G, Chen H, Hu Y, Li H, Xing L, Hu W (2017) An enhanced PCA XE “ principle component analysis (PCA) “ method with Savitzky-Golay method for VRF system sensor fault detection and diagnosis. Energy Build 142:167–178CrossRef

36.

Kyprianou A, Phinikarides A, Makrides G, Georghiou G (2015) Definition and computation of the degradation rates of photovoltaic systems of different technologies with robust Principal Component Analysis. IEEE J Photo 5(6):1698–1705CrossRef

37.

Wu J., Chen W., Huang K., Tan T., 2011. Partial least squares based subwindow search for pedestrian detection. 2011 18th IEEE International Conference on Image Processing.

38.

Yu Z, Chen H, You J, Liu J, Wong H, Han G, Li L (2015) Adaptive fuzzy consensus clustering framework for clustering analysis of cancer data. IEEE/ACM Trans Comput Biol Bioinf 12(4):887–901CrossRef

39.

Yan R, Ma Z, Kokogiannakis G, Zhao Y (2016) A sensor fault detection strategy for air handling units using cluster analysis. Autom Construct 70:77–88CrossRef

40.

Navi M, Meskin N, Davoodi M (2018) Sensor fault detection and isolation of an industrial gas turbine using partial adaptive KPCA XE “principle component analysis (PCA)". J Process Control 64:37–48CrossRef

41.

Rimpault X, Bitar-Nehme E, Balazinski M, Mayer J (2018) Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement 118:23–28CrossRef

42.

Roueff F, Vehel J (2018) A regularization approach to fractional dimension estimation. World Scientific Publisher, Fractals and Beyond

43.

Teti R, Jemielniak K, O’Donnell G, Dornfeld D (2010) Advanced monitoring of machining operations. CIRP Annals – Manufact Technol 59:717–739

44.

Axinte D, Gindy N (2004) Assessment of the effectiveness of a spindle power signal for tool condition monitoring in machining processes. Int J Prod Res 42(13):2679–2691CrossRef

45.

Feng Z, Zuo M, Chu F (2010) Application of regularization dimension to gear damage assessment. Mech Syst Signal Process 24(4):1081–1098CrossRef

46.

Rajpurkar P, Hannun A, Haghpanahi M, Bourn C, Ng A (2018) Cardiologist-level arrhythmia detection with convolutional neural networks. arXiv:1707.01836

47.

Ioffe S, Szegedy C (2015) Batch normalization: Accelerating deep network training by reducing internal covariate shift. arXiv:1502.03167

48.

Priddy K, Keller P (2005) Artificial neural networks. Bellingham, Wash. <1000 20th St. Bellingham WA 98225–6705 USA>: SPIE

49.

Hinton G, Srivastava N, Krizhevsky A, Sutskever I, Salakhutdinov R (2012) Improving neural networks by preventing co-adaptation of feature detectors. arXiv:1207.0580v1

50.

Ke X, Cao W, Lv F (2017) Relationship between complexity and precision of convolutional neural networks. Proceedings of the 2017 2nd International Symposium on Advances in Electrical, Electronics and Computer Engineering (ISAEECE 2017)

51.

He K, Sun J (2014) Convolutional neural networks at constrained time cost. arXiv:1412.1710

Title: Fog Computing and Convolutional Neural Network Enabled Prognosis for Machining Process Optimization
Authors: Y. C. Liang
W. D. Li
X. Lu
S. Wang
Publisher: Springer International Publishing
Book: Data Driven Smart Manufacturing Technologies and Applications
Print ISBN: 978-3-030-66848-8

Electronic ISBN: 978-3-030-66849-5

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-3-030-66849-5_2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners