Skip to main content
main-content
Top

Hint

Swipe to navigate through the articles of this issue

Published in: Physics of Metals and Metallography 12/2021

01-12-2021 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Formation of Surface Layers of Stainless Steel and Titanium Alloy by N+ Ion Implantation

Authors: V. L. Vorob’ev, P. V. Bykov, A. A. Kolotov, F. Z. Gilmutdinov, I. K. Averkiev, V. Ya. Bayankin

Published in: Physics of Metals and Metallography | Issue 12/2021

Login to get access
share
SHARE

Abstract

The N+ ion implantation effect on the surface morphology, nitrogen accumulation, formation of chemical compounds, and structural and phase state of 03Kh17N12M2T steel and VT6 titanium alloy surface layers has been investigated. Irradiation with N+ ions results in nitrogen accumulation up to 17 at % in stainless steel, and the formation of chemical compounds, such as CrN, Cr2N, MoN, TiN, and Fe4N, in the form of small clusters with the crater-shaped surface. Nitrogen in the titanium alloy is accumulated up to 32 at % to form titanium nitrides, in particular, TiN, in the form of phase inclusions, distributed over the entire surface. The surface morphology of stainless steel is shown to depend on sputtering processes, while that of titanium alloy is shown to depend on the formation of numerous titanium nitride inclusions.

To get access to this content you need the following product:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 58.000 Bücher
  • über 300 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literature
1.
go back to reference D. A. Kozlov, B. A. Krit, V. V. Stolyarov, and V. V. Ovchinnikov, “Ion-beam modification of tribological properties of chromium steel,” Fiz. Khim. Obr. Mater., No. 1, 50–53 (2010). D. A. Kozlov, B. A. Krit, V. V. Stolyarov, and V. V. Ovchinnikov, “Ion-beam modification of tribological properties of chromium steel,” Fiz. Khim. Obr. Mater., No. 1, 50–53 (2010).
2.
go back to reference A. R. Sungatulin, V. P. Sergeev, M. V. Fedorishcheva, and O. V. Sergeev, “Influence of treatment with ion beams (Cr + B) of the surface layer of steel 38KhN3MFA on wear resistance,” Izv. Tomskogo Politekhnicheskogo Un-Ta 315, No. 2, 134–137 (2009). A. R. Sungatulin, V. P. Sergeev, M. V. Fedorishcheva, and O. V. Sergeev, “Influence of treatment with ion beams (Cr + B) of the surface layer of steel 38KhN3MFA on wear resistance,” Izv. Tomskogo Politekhnicheskogo Un-Ta 315, No. 2, 134–137 (2009).
3.
go back to reference S. N. Bratushka and L. V. Malikov, “Ion-plasma modification of titanium alloys,” Vopr. At. Nauki Tekh., No. 6, 126–140 (2011). S. N. Bratushka and L. V. Malikov, “Ion-plasma modification of titanium alloys,” Vopr. At. Nauki Tekh., No. 6, 126–140 (2011).
4.
go back to reference V. V. Ovchinnikov, E. V. Makarov, and N. V. Gushchina, “Austenite formation in α-phase Fe–Mn alloy after cold plastic working and fast heating by an Ar + ion beam to 299°C,” Phys. Met. Metallogr. 120, No. 12, 1207–1212 (2019). CrossRef V. V. Ovchinnikov, E. V. Makarov, and N. V. Gushchina, “Austenite formation in α-phase Fe–Mn alloy after cold plastic working and fast heating by an Ar + ion beam to 299°C,” Phys. Met. Metallogr. 120, No. 12, 1207–1212 (2019). CrossRef
5.
go back to reference A, Gulyaev, Metal Science, 7th ed. (Metallurgiya, Moscow, 2015) [in Russian]. A, Gulyaev, Metal Science, 7th ed. (Metallurgiya, Moscow, 2015) [in Russian].
6.
go back to reference E. V. Shelekhov and T. A. Sviridova, “Programs for X‑ray analysis of polycrystals,” Met. Sci. Heat Treat., No. 8, 309–313 (2000). E. V. Shelekhov and T. A. Sviridova, “Programs for X‑ray analysis of polycrystals,” Met. Sci. Heat Treat., No. 8, 309–313 (2000).
7.
go back to reference R. Berish, Sputtering of Solids Using Ion Bombardement (Mir, Moscow, 1984) [in Russian]. R. Berish, Sputtering of Solids Using Ion Bombardement (Mir, Moscow, 1984) [in Russian].
8.
go back to reference https://srdata.nist.gov/xps/EnergyTypeValSrch.aspx. https://srdata.nist.gov/xps/EnergyTypeValSrch.aspx.
9.
go back to reference Y. Shi, Siyuan Long, L. Fang, F. Pan, and H. Liao, “Effects of N 2 content and thickness on CrN x coatings on Mg alloy by the planar DC reactive magnetron sputtering,” Appl. Surf. Sci. 255, 6515–6524 (2009). CrossRef Y. Shi, Siyuan Long, L. Fang, F. Pan, and H. Liao, “Effects of N 2 content and thickness on CrN x coatings on Mg alloy by the planar DC reactive magnetron sputtering,” Appl. Surf. Sci. 255, 6515–6524 (2009). CrossRef
10.
go back to reference H. Dong, S. He, X. Wang, C. Zhang, and D. Sun, “Study on conductivity and corrosion resistance of N‑doped and Cr/N co-doped DLC films on bipolar plates for PEMFC,” Diamond Relat. Mater. 110, 108156 (2020). CrossRef H. Dong, S. He, X. Wang, C. Zhang, and D. Sun, “Study on conductivity and corrosion resistance of N‑doped and Cr/N co-doped DLC films on bipolar plates for PEMFC,” Diamond Relat. Mater. 110, 108156 (2020). CrossRef
11.
go back to reference Z. N. Jaf, Z.-T. Jiang, H. A. Miran, M. Altarawneh, J.‑P. Veder, M. Minakshi, Z-f. Zhou, H. N. Lim, N. M. Huang, and Z. Bogdan, “Dlugogorski Physico-chemical properties of CrMoN coatings—combined experimental and computational studies,” Thin Solid Films, 137671 (2020). Z. N. Jaf, Z.-T. Jiang, H. A. Miran, M. Altarawneh, J.‑P. Veder, M. Minakshi, Z-f. Zhou, H. N. Lim, N. M. Huang, and Z. Bogdan, “Dlugogorski Physico-chemical properties of CrMoN coatings—combined experimental and computational studies,” Thin Solid Films, 137671 (2020).
12.
go back to reference Y. Jiang, X. Zhang, A. Al Mehedi, M. Yang and J.‑P. Wang, “A method to evaluate α"-Fe 16N 2 volume ratio in FeN bulk material by XPS,” Mater. Res. Express 2, 1–8 (2015). Y. Jiang, X. Zhang, A. Al Mehedi, M. Yang and J.‑P. Wang, “A method to evaluate α"-Fe 16N 2 volume ratio in FeN bulk material by XPS,” Mater. Res. Express 2, 1–8 (2015).
13.
go back to reference S. M. Reshetnikov, O. R. Bakieva, E. M. Borisova, V. L. Vorob’ev, F. Z. Gil’mutdinov, T. S. Kartapova, and V. Ya. Bayankin, “Effect of nitrogen ion implantation on corrosion-electrochemical and other properties of Armco-iron. Part II. Corrosion-electrochemical behavior of Armco-iron samples implanted with nitrogen ions,” Korroziya: Mater., Zashch., No. 4, 1–8 (2017). S. M. Reshetnikov, O. R. Bakieva, E. M. Borisova, V. L. Vorob’ev, F. Z. Gil’mutdinov, T. S. Kartapova, and V. Ya. Bayankin, “Effect of nitrogen ion implantation on corrosion-electrochemical and other properties of Armco-iron. Part II. Corrosion-electrochemical behavior of Armco-iron samples implanted with nitrogen ions,” Korroziya: Mater., Zashch., No. 4, 1–8 (2017).
Metadata
Title
Formation of Surface Layers of Stainless Steel and Titanium Alloy by N+ Ion Implantation
Authors
V. L. Vorob’ev
P. V. Bykov
A. A. Kolotov
F. Z. Gilmutdinov
I. K. Averkiev
V. Ya. Bayankin
Publication date
01-12-2021
Publisher
Pleiades Publishing
Published in
Physics of Metals and Metallography / Issue 12/2021
Print ISSN: 0031-918X
Electronic ISSN: 1555-6190
DOI
https://doi.org/10.1134/S0031918X21120139