Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
General Introduction Read chapter Read first chapter

2019 | OriginalPaper | Chapter

3. Friction Stir Welding and Friction Stir Spot Welding of Similar Aluminium and Copper Alloys

Authors : Mukuna Patrick Mubiayi, Esther Titilayo Akinlabi, Mamookho Elizabeth Makhatha

Published in: Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW)

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Friction stir welding (FSW) and friction stir spot welding are solid state joining processes employed for the joining of similar and dissimilar materials. The processes are used by many researchers; because these processes produce sound welds; and they do not have common welding problems, such as solidification and liquefaction cracking related to the fusion welding methods. FSW and FSSW of similar aluminium and copper gained ground in the development of solid state joining processes. It may be observed that for FSW and FSSW of similar copper, many research studies were carried out using pure copper as the parent material. Whereas, for similar aluminium, almost the entire aluminium alloy series is utilized. Good quality joints with enhanced properties have been produced; and more studies are required, in order to fully optimize these processes. This could be beneficial in curbing global warming; since FSW and FSSW are both labelled as being environmentally friendly joining processes. In this chapter, FSW and FSSW research studies on similar aluminium and copper are briefly summarized in terms of the process parameters, the microstructural evolution and the mechanical properties.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter Friction Stir Welding and Friction Stir Spot Welding of Aluminium/Copper Alloys
next chapter Microstructure and Chemical Analysis of Friction Stir Spot Welding Between Aluminium and Copper (Case Study)
Literature
1.
Shukla AK, Chelladurai H, Tiwari S (2017) Effect of pre-heat time on force during friction stir welding of aluminium 1050 alloy. Mater Today: Proc 4(2):3618–3626CrossRef
2.
Sajed M (2016) Parametric study of two-stage refilled friction stir spot welding. J Manuf Process 24:307–317CrossRef
3.
Ma S, Zhao Y, Zou J, Yan K, Liu C (2017) The effect of laser surface melting on microstructure and corrosion behavior of friction stir welded aluminum alloy 2219. Opt Laser TechnolCrossRef
4.
Li Z, Yue Y, Ji S, Peng C, Wang L (2016) Optimal design of thread geometry and its performance in friction stir spot welding. Mater Des 94:368–376CrossRef
5.
Tutar M, Aydin H, Yuce C, Yavuz N, Bayram A (2014) The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array. Mater Des 63:789–797CrossRef
6.
Shanavas S, Dhas JER (2017) Parametric optimization of friction stir welding parameters of marine grade aluminium alloy using response surface methodology. Trans Nonferrous Metals Soc China 27(11):2334–2344CrossRef
7.
Rana PK, Narayanan RG, Kailas SV (2018) Effect of rotational speed on friction stir spot welding of AA5052-H32/HDPE/AA5052-H32 sandwich sheets. J Mater Process Technol 252:511–523CrossRef
8.
Costa MI, Leitão C, Rodrigues DM (2017) Influence of post-welding heat-treatment on the monotonic and fatigue strength of 6082-T6 friction stir lap welds. J Mater Process Technol 250:289–296CrossRef
9.
Zeng KW, Su ZM, Luo SM, Lin PC, Dong MT, Tang T, Huang B (2013) Removing approach for flashes of friction stir spot welds. J Mater Process Technol 213(10):1725–1733CrossRef
10.
Sun T, Roy MJ, Strong D, Withers PJ, Prangnell PB (2017) Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds. J Mater Process Technol 242:92–100CrossRef
11.
Shen Z, Yang X, Zhang Z, Cui L, Li T (2013) Microstructure and failure mechanisms of refill friction stir spot welded 7075-T6 aluminum alloy joints. Mater Des 44:476–486CrossRef
12.
Sanusi KO, Akinlabi ET, Muzenda E, Akinlabi SA (2015) Enhancement of corrosion resistance behaviour of frictional stir spot welding of copper. Mater Today: Proc 2(4–5):1157–1165CrossRef
13.
Sun YF, Fujii H (2010) Investigation of the welding parameter dependent microstructure and mechanical properties of friction stir welded pure copper. Mater Sci Eng A 527(26):6879–6886CrossRef
14.
Teimurnezhad J, Pashazadeh H, Masumi A (2016) Effect of shoulder plunge depth on the weld morphology, macrograph and microstructure of copper FSW joints. J Manuf Process 22:254–259CrossRef
15.
Srirangarajalu N, Reddy GM, Rao SK, Rajadurai A (2012) Microstructure and mechanical behaviour of friction stir welded copper. In: Trends in intelligent robotics, automation, and manufacturing: first international conference, IRAM 2012, Kuala Lumpur, Malaysia, 28–30 Nov 2012, Proceedings, vol 330. Springer, p 458
16.
Heidarzadeh A, Jabbari M, Esmaily M (2015) Prediction of grain size and mechanical properties in friction stir welded pure copper joints using a thermal model. Int J Adv Manuf Technol 77(9–12):1819–1829CrossRef
17.
Azizi A, Barenji RV, Barenji AV, Hashemipour M (2016) Microstructure and mechanical properties of friction stir welded thick pure copper plates. Int J Adv Manuf Technol 86(5–8):1985–1995CrossRef
18.
Xue P, Xie GM, Xiao BL, Ma ZY, Geng L (2010) Effect of heat input conditions on microstructure and mechanical properties of friction-stir-welded pure copper. Metall Mater Trans A 41(8)CrossRef
19.
Nia AA, Shirazi A (2016) Effects of different friction stir welding conditions on the microstructure and mechanical properties of copper plates. Int J Miner Metall Mater 23(7):799–809CrossRef
20.
Surekha K, Els-Botes A (2012) Effect of cryotreatment on tool wear behaviour of Bohler K390 and AISI H13 tool steel during friction stir welding of copper. Trans Indian Inst Met 65(3):259–264CrossRef
21.
Fattah-Alhosseini A, Taheri AH, Keshavarz MK (2016) Effect of friction stir welding on electrochemical behavior of pure copper. Trans Indian Inst Met 69(7):1423–1434CrossRef
22.
Emami S, Saeid T (2015) Effects of welding and rotational speeds on the microstructure and hardness of friction stir welded single-phase brass. Acta Metallurgica Sinica (English Letters) 28(6):766–771CrossRef
23.
Mao Y, Ke L, Chen Y, Liu F, Xing L (2017) Inhomogeneity of microstructure and mechanical properties in the nugget of friction stir welded thick 7075 aluminum alloy joints. J Mater Sci Technol
24.
Deng C, Gao R, Gong B, Yin T, Liu Y (2017) Correlation between micro-mechanical property and very high cycle fatigue (VHCF) crack initiation in friction stir welds of 7050 aluminum alloy. Int J Fatigue 104:283–292CrossRef
25.
Sudhagar S, Sakthivel M, Mathew PJ, Daniel SAA (2017) A multi criteria decision making approach for process improvement in friction stir welding of aluminium alloy. Measurement 108:1–8CrossRef
26.
Martinez N, Kumar N, Mishra RS, Doherty KJ (2017) Effect of tool dimensions and parameters on the microstructure of friction stir welded aluminum 7449 alloy of various thicknesses. Mater Sci Eng A 684:470–479CrossRef
27.
Sinhmar S, Dwivedi DK (2017) Enhancement of mechanical properties and corrosion resistance of friction stir welded joint of AA2014 using water cooling. Mater Sci Eng A 684:413–422CrossRef
28.
Sun T, Reynolds AP, Roy MJ, Withers PJ, Prangnell PB (2017) The effect of shoulder coupling on the residual stress and hardness distribution in AA7050 friction stir butt welds. Mater Sci Eng A
29.
Wang ZB, He ZB, Fan XB, Zhou L, Lin YL, Yuan SJ (2017) High temperature deformation behavior of friction stir welded 2024-T4 aluminum alloy sheets. J Mater Process Technol 247:184–191CrossRef
30.
Martinez N, Kumar N, Mishra RS, Doherty KJ (2017) Microstructural variation due to heat gradient of a thick friction stir welded aluminum 7449 alloy. J Alloy Compd 713:51–63CrossRef
31.
Sidhar H, Mishra RS, Reynolds AP, Baumann JA (2017) Impact of thermal management on post weld heat treatment efficacy in friction stir welded 2050-T3 alloy. J Alloy Compd 722:330–338CrossRef
32.
Liu CY, Qu B, Xue P, Ma ZY, Luo K, Ma MZ, Liu RP (2017) Fabrication of large-bulk ultrafine grained 6061 aluminum alloy by rolling and low-heat-input friction stir welding. J Mater Sci Technol
33.
Liu X, Liu H, Wang T, Wang X, Yang S (2017) Correlation between microstructures and mechanical properties of high-speed friction stir welded aluminum hollow extrusions subjected to axial forces. J Mater Sci Technol
34.
Abdulstaar MA, Al-Fadhalah KJ, Wagner L (2017) Microstructural variation through weld thickness and mechanical properties of peened friction stir welded 6061 aluminum alloy joints. Mater Charact 126:64–73CrossRef
35.
Liu H, Hu Y, Dou C, Sekulic DP (2017) An effect of the rotation speed on microstructure and mechanical properties of the friction stir welded 2060-T8 Al-Li alloy. Mater Charact 123:9–19CrossRef
36.
Chen H, Fu L, Liang P, Liu F (2017) Defect features, texture and mechanical properties of friction stir welded lap joints of 2A97 Al-Li alloy thin sheets. Mater Charact 125:160–173CrossRef
37.
Heirani F, Abbasi A, Ardestani M (2017) Effects of processing parameters on microstructure and mechanical behaviors of underwater friction stir welding of Al5083 alloy. J Manuf Process 25:77–84CrossRef
38.
Gabrielli F, Forcellese A, El Mehtedi M, Simoncini M (2017) Mechanical properties and formability of cold rolled friction stir welded sheets in AA5754 for automotive applications. Procedia Eng 183:245–250CrossRef
39.
Bevilacqua M, Ciarapica FE, D’Orazio A, Forcellese A, Simoncini M (2017) Sustainability analysis of friction stir welding of AA5754 sheets. Procedia CIRP 62:529–534CrossRef
40.
Kumar PS, Shastry CS, Devaraju A (2017) Influence of tool revolving on mechanical properties of friction stir welded 5083Aluminum alloy. Mater Today: Proc 4(2):330–335CrossRef
41.
Verma S, Misra JP (2017) Study on temperature distribution during friction stir welding of 6082 aluminum alloy. Mater Today: Proc 4(2):1350–1356CrossRef
42.
Prasad SR, Kumar A, Reddy CS, Raju LS (2017) Influence of tool shoulder geometry on microstructure and mechanical properties of friction stir welded 2014-T6 aluminium alloy. Mater Today: Proc 4(9):10207–10211CrossRef
43.
Sankar BR, Umamaheswarrao P (2017) Modelling and optimisation of friction stir welding on AA6061 Alloy. Mater Today: Proc 4(8):7448–7456CrossRef
44.
Franke DJ, Morrow JD, Zinn MR, Duffie NA, Pfefferkorn FE (2017) Experimental determination of the effective viscosity of plasticized aluminum alloy 6061-T6 during friction stir welding. Procedia Manuf 10:218–231CrossRef
45.
Imam M, Racherla V, Biswas K (2015) Effect of backing plate material in friction stir butt and lap welding of 6063-T4 aluminium alloy. The Int J Adv Manuf Technol 77(9–12):2181–2195CrossRef
46.
Karthikeyan P, Mahadevan K (2015) Investigation on the effects of SiC particle addition in the weld zone during friction stir welding of Al 6351 alloy. The Int J Adv Manuf Technol 80(9–12):1919–1926CrossRef
47.
Babu N, Karunakaran N, Balasubramanian V (2017) A study to estimate the tensile strength of friction stir welded AA 5059 aluminium alloy joints. The Int J Adv Manuf Technol 93(1–4):1–9CrossRef
48.
Jamalian HM, Farahani M, Givi MB, Vafaei MA (2016) Study on the effects of friction stir welding process parameters on the microstructure and mechanical properties of 5086-H34 aluminum welded joints. The Int J Adv Manuf Technol 83(1–4):611–621CrossRef
49.
Imam M, Racherla V, Biswas K, Fujii H, Chintapenta V, Sun Y, Morisada Y (2017) Microstructure-property relation and evolution in friction stir welding of naturally aged 6063 aluminium alloy. The Int J Adv Manuf Technol 91(5–8):1753–1769CrossRef
50.
Amini K, Gharavi F (2016) Influence of welding speed on corrosion behaviour of friction stir welded AA5086 aluminium alloy. J Central South Univ 23(6):1301–1311CrossRef
51.
Ramanjaneyulu K, Reddy GM, Rao AV (2014) Role of tool shoulder diameter in friction stir welding: an analysis of the temperature and plastic deformation of AA 2014 aluminium alloy. Trans Indian Inst Met 67(5):769–780CrossRef
52.
Farzadi A, Bahmani M, Haghshenas DF (2017) Optimization of operational parameters in friction stir welding of AA7075-T6 aluminum alloy using response surface method. Arab J Sci Eng 42(11):4905–4916CrossRef
53.
Reimann M, Goebel J, Gartner TM, dos Santos JF (2017) Refilling termination hole in AA 2198–T851 by refill friction stir spot welding. J Mater Process Technol 245:157–166CrossRef
54.
Sun Y, Morisada Y, Fujii H, Tsuji N (2017) Ultrafine grained structure and improved mechanical properties of low temperature friction stir spot welded 6061-T6 Al alloys. Mater Charact
55.
Su ZM, He RY, Lin PC, Dong K (2014) Fatigue analyses for swept friction stir spot welds in lap-shear specimens of alclad 2024-T3 aluminum sheets. Int J Fatigue 61:129–140CrossRef
56.
Venukumar S, Muthukumaran S, Yalagi SG, Kailas SV (2014) Failure modes and fatigue behavior of conventional and refilled friction stir spot welds in AA 6061-T6 sheets. Int J Fatigue 61:93–100CrossRef
57.
Merzoug M, Mazari M, Berrahal L, Imad A (2010) Parametric studies of the process of friction spot stir welding of aluminium 6060-T5 alloys. Mater Des 31(6):3023–3028CrossRef
58.
Zhang Z, Yang X, Zhang J, Zhou G, Xu X, Zou B (2011) Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy. Mater Des 32(8):4461–4470CrossRef
59.
Hassanifard S, Ahmadi SR, Pour MM (2013) Weld arrangement effects on the fatigue behavior of multi friction stir spot welded joints. Mater Des 44:291–302CrossRef
60.
Wang DA, Chen CH (2009) Fatigue lives of friction stir spot welds in aluminum 6061-T6 sheets. J Mater Process Technol 209(1):367–375MathSciNetCrossRef
61.
Su ZM, He RY, Lin PC, Dong K (2016) Fatigue of alclad AA2024-T3 swept friction stir spot welds in cross-tension specimens. J Mater Process Technol 236:162–175CrossRef
62.
Li WY, Chu Q, Yang XW, Shen JJ, Vairis A, Wang WB (2018) Microstructure and morphology evolution of probeless friction stir spot welded joints of aluminum alloy. J Mater Process Technol 252:69–80CrossRef
63.
Venukumar S, Yalagi S, Muthukumaran S (2013) Comparison of microstructure and mechanical properties of conventional and refilled friction stir spot welds in AA 6061-T6 using filler plate. Trans Nonferrous Metals Soc China 23(10):2833–2842CrossRef
64.
Xu Z, Li Z, Ji S, Zhang L (2017) Refill friction stir spot welding of 5083-O aluminum alloy. J Mater Sci Technol
65.
Cao JY, Wang M, Kong L, Zhao HX, Chai P (2017) Microstructure, texture and mechanical properties during refill friction stir spot welding of 6061-T6 alloy. Mater Charact 128:54–62CrossRef
66.
Nasiri AM, Shen Z, Hou JSC, Gerlich AP (2018) Failure analysis of tool used in refill friction stir spot welding of Al 2099 alloy. Eng Fail Anal 84:25–33CrossRef
67.
Garg A, Bhattacharya A (2017) On lap shear strength of friction stir spot welded AA6061 alloy. J Manuf Process 26:203–215CrossRef
68.
Rostamiyan Y, Seidanloo A, Sohrabpoor H, Teimouri R (2015) Experimental studies on ultrasonically assisted friction stir spot welding of AA6061. Arch Civil Mech Eng 15(2):335–346CrossRef
69.
Kubit A, Kluz R, Trzepieciński T, Wydrzyński D, Bochnowski W (2018) Analysis of the mechanical properties and of micrographs of refill friction stir spot welded 7075-T6 aluminium sheets. Arch Civil Mech Eng 18(1):235–244CrossRef
70.
Jonckheere C, de Meester B, Cassiers C, Delhaye M, Simar A (2012) Fracture and mechanical properties of friction stir spot welds in 6063-T6 aluminum alloy. Int J Adv Manuf Technol 62(5):569–575CrossRef
71.
Song X, Ke L, Xing L, Liu F, Huang C (2014) Effect of plunge speeds on hook geometries and mechanical properties in friction stir spot welding of A6061-T6 sheets. Int J Adv Manuf Technol 71
72.
Zhou L, Luo LY, Zhang TP, He WX, Huang YX, Feng JC (2017) Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy. Int J Adv Manuf Technol 1–9
73.
Santana LM, Suhuddin UFH, Ölscher MH, Strohaecker TR, dos Santos JF (2017) Process optimization and microstructure analysis in refill friction stir spot welding of 3-mm-thick Al-Mg-Si aluminum alloy. Int J Adv Manuf Technol 1–8
74.
Kubit A, Bucior M, Wydrzyński D, Trzepieciński T, Pytel M (2017) Failure mechanisms of refill friction stir spot welded 7075-T6 aluminium alloy single-lap joints. Int J Adv Manuf Technol 1–13
75.
Paidar M, Khodabandeh A, Najafi H, Rouh-aghdam AS (2014) Effects of the tool rotational speed and shoulder penetration depth on mechanical properties and failure modes of friction stir spot welds of aluminum 2024-T3 sheets. J Mech Sci Technol 28(12):4893–4898CrossRef
76.
Pashazadeh H, Teimournezhad J, Masoumi A (2017) Experimental investigation on material flow and mechanical properties in friction stir welding of copper sheets. Int J Adv Manuf Technol 88(5–8):1961–1970CrossRef
77.
Rao AN, Naik LS, Srinivas C (2017) Evaluation and impacts of tool profile and rotational speed on mechanical properties of friction stir welded copper 2200 alloy. J Manuf Process 4(2):1225–1229
78.
Akinlabi ET, Sanusi KO, Muzenda E, Akinlabi SA (2017) Material behaviour characterization of friction stir spot welding of copper. Mater Today: Proc 4(2):166–177CrossRef
Metadata
Title
Friction Stir Welding and Friction Stir Spot Welding of Similar Aluminium and Copper Alloys
Authors
Mukuna Patrick Mubiayi
Esther Titilayo Akinlabi
Mamookho Elizabeth Makhatha
Copyright Year
2019
Book
Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW)

Print ISBN: 978-3-319-92749-7

Electronic ISBN: 978-3-319-92750-3

Copyright Year: 2019

DOI
https://doi.org/10.1007/978-3-319-92750-3_3

Premium Partners

    Image Credits