Top

International Journal on Interactive Design and Manufacturing (IJIDeM)

04-10-2022 | Original Paper

Geometric optimization of compressor head fin body for effective heat transfer by finite element method

Authors: Sachin M. Shinde, Mohit Diwan, Ramendra Singh Niranjan, Shubhangi Vaikole, R. Ramesh

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM)

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This manuscript focuses on providing optimized transfer rate of heat produced in the fins that are provided on the cylinder head present on the compressor. In this paper three different cross sections are taken in to consideration, which are straight (rectangular), trapezoidal and parabolic cross section. The parabolic cross section stands to be the optimized cross section at level one. Then further rectangular and triangular profiles are analyzed at the tip periphery and at the base of the parabolic fin. Investigation results declare that parabolic fin body having rectangular slot at the base provides the most optimized heat transfer rate in the profile. The last stage optimization is done by providing circular holes at the tip and at the base of the fin geometry. The final results that are laid in the paper depicts that parabolic fin body having rectangular profile cut at the base along with cylindrical profile slots is the most optimized geometry that provides highest heat transfer rate.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Kim, K.T., Kang, H.S.: A Heat loss comparison between the two parabolic fin models using two different methods. J. Korean Soc. Ind. Appl. Math. 2, 97–109 (1998)

Barhatte, S.H., Chopade, M.R., Kapatkar, V.N.: Experimental and computational analysis and optimization for heat transfer through fins with different types of notch. J. Eng. Res. Stud. II(I), 133–138 (2011)

Wang, F., Zhang, J., Wang, S.: Investigation on flow and heat transfer characteristics in rectangular channel with drop-shaped pin fins. Propuls. Power Res. 1(1), 64–70 (2012). https://doi.org/10.1016/j.jppr.2012.10.003CrossRef

Agarwal, P., Shrikhande, M., Srinivasan, P.: Heat transfer simulation by CFD from fins of an air cooled motorcycle engine under varying climatic conditions. Proc. World Congr. Eng. 3, 2385–2389 (2011)

Tong, G., Xu, X., Yuan, Q., Yang, Y., Tang, W., Sun, X.: Research on influencing factors of heat transfer enhancement fins in fuel cell cooling channel. Ionics (Kiel) 27(2), 743–757 (2021). https://doi.org/10.1007/s11581-020-03841-wCrossRef

Padmanabhan, S., et al.: Investigation of temperature distribution of fin profiles using analytical and CFD analysis. Mater. Today Proc. 44, 3550–3556 (2021). https://doi.org/10.1016/j.matpr.2020.09.404CrossRef

Madhavadas, V., Das, D., Mohta, K.A., Senthur, S.: Comparative analysis on heat transfer of various fin profile using solid works: a systematic review. In: IOP Conference Series: Earth and Environmental Science, pp. 1–16. https://doi.org/10.1088/1755-1315/850/1/012029.

Balashowry, K., Saikrishna, T., Reddy, K.S.H.C., Kalyan, M.: Effect of heat transfer through arbitrary shaped fins using computational fluid dynamics. Int. J. Eng. Adv. Technol. 10(1), 182–187 (2020). https://doi.org/10.35940/ijeat.a1790.1010120CrossRef

Davoodi, H., Yaghoubi, M.: Experimental and numerical study of natural convection heat transfer from arrays of zigzag fins. Heat Mass Transf. Stoffuebertragung 55(7), 1913–1926 (2019). https://doi.org/10.1007/s00231-018-2449-5CrossRef

10.

Senthilkumar, P., Rajesh Babu, S., Koodalingam, B., Dharmaprabhakaran, T.: Design and thermal analysis on circular fin. Mater. Today Proc. 33, 2901–2906 (2020). https://doi.org/10.1016/j.matpr.2020.02.784CrossRef

11.

Kumar, R., Singh, D., Sharma, A.K.: Static thermal analysis of fins. Int. J. Mech. Eng. Technol. 11(2), 10–21 (2020)

12.

Karagiozis, A., Raithby, G.D., Hollands, K.G.T.: Natural convection heat transfer from array of isothermal triangular fins in AIR. J. Heat Transf. 116, 105–111 (2014)CrossRef

13.

Wange, S.M., Matkar, R.M.: Computational analysis of inverted notched fin arrays dissipating heat by natural convection. Int. J. Eng. Innov. Technol. 2(11), 245–249 (2013)

14.

Kharche, S.S., Farkade, H.S.: Heat transfer analysis through fin array by using natural convection. Int. J. Emerg. Technol. Adv. Eng. 2(4), 595–598 (2012)

15.

Hanamant, D., Vijaykumar, K.N., Dhanawade, K.: Natural convection heat transfer flow visualization of perforated fin arrays by CFD simulation. Int. J. Res. Eng. Technol. 2(12), 483–490 (2013)CrossRef

16.

Jain, M., Sankhala, M., Patidar, K., Aurangabadkar, L.: Heat transfer analysis and optimization of fins by variation in geometry. In: Proceedings of WRFER-IEEEFORUM International Conference, pp. 108–114 (2017)

17.

Ragupati, P., Sivakumar, V.R.: Enhancing heat removal by optimizing fin configuration in air compressor. Technol. Int. J. Eng. Sci. Res. 3(5), 111–116 (2014)

18.

Charles, R., Wang, C.C.: An optimized heat dissipation fin design applicable for natural convection augmentation (IMPACT 2014). In: In 2014 9th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), pp. 61–64 (2014). https://doi.org/10.1109/IMPACT.2014.7048391

19.

Patel, A., Srivastava, M., Gupta, A.K.S.V.K.: Design of fin for various variables. Int. J. Trend Sci. Res. Dev. 3(4), 514–520 (2019)

20.

Zaidshah, S., Yadav, V.: Heat transfer from different types of fins with notches with varying materials to enhance rate of heat transfer a review. Int. J. Appl. Eng. Res. 14(9), 174–179 (2019)

21.

Barhatte, S.H., Chopade, M.R.: Experimental and computational analysis and optimization for heat transfer through fins with triangular notch. Int. J. Emerg. Technol. Adv. Eng. 2(7), 483–487 (2012)

22.

Mashud, M., Inam, M.I., Arani, Z.R., Tanveer, A.: Experimental investigation of meat transfer characteristics of cylindrical fin with different grooves. Int. J. Mech. Mechatron. Eng. 9(10), 40–45 (2009)

23.

Fajiang, H., Weiwu, C., Ping, Y.: Experimental investigation of heat transfer and flowing resistance for air flow cross over spiral finned tube heat exchanger. In: 2012 International Conference on Future Electrical Power and Energy Systems, vol. 17, pp. 741–749 (2012). https://doi.org/10.1016/j.egypro.2012.02.166

24.

Ehteshum, M., Ali, M., Islam, M.Q., Tabassum, M.: Thermal and hydraulic performance analysis of rectangular fin arrays with perforation size and number. In 6th BSME International Conference on Thermal Engineering (ICTE 2014), vol. 105, pp. 184–191 (2015). https://doi.org/10.1016/j.proeng.2015.05.054

25.

Kannan, C., Sathyabalan, P., Ramanathan, S.: A numerical research of heat transfer in rectangular fins with different perforations. Int. J. Innov. Technol. Explor. Eng. 8(12S), 367–371 (2019). https://doi.org/10.35940/ijitee.l1093.10812s19CrossRef

26.

Li, D., Yu, Z.: Natural convection melting in a cubic cavity with internal fins: a lattice Boltzmann study. Case Stud. Therm. Eng. 25, 100919 (2021). https://doi.org/10.1016/j.csite.2021.100919CrossRef

27.

Sheik Ismail, L., Ranganayakulu, C., Shah, R.K.: Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design data for offset and wavy fins. Int. J. Heat Mass Transf. 52(17–18), 3972–3983 (2009). https://doi.org/10.1016/j.ijheatmasstransfer.2009.03.026CrossRef

28.

AlEssa, A.H., Al-Widyan, M.I.: Enhancement of natural convection heat transfer from a fin by triangular perforation of bases parallel and toward its tip. Appl. Math. Mech. 29(8), 1033–1044 (2008). https://doi.org/10.1007/s10483-008-0807-xCrossRefMATH

29.

Karami, M., Yaghoubi, M., Keyhani, A.: Experimental study of natural convection from an array of square fins. Exp. Therm. Fluid Sci. 93, 409–418 (2018). https://doi.org/10.1016/j.expthermflusci.2018.01.020CrossRef

30.

Mokheimer, E.M.A.: Performance of annular fins with different profiles subject to variable heat transfer coefficient. Int. J. Heat Mass Transf. 45(17), 3631–3642 (2002). https://doi.org/10.1016/S0017-9310(02)00078-9CrossRefMATH

31.

Mate, D.M., Tale, V.T.: Effects of pin fin arrangement its heat transfer characteristics on performance of heat sink. Mater. Today Proc. 43, 2377–2382 (2020). https://doi.org/10.1016/j.matpr.2021.01.940CrossRef

32.

Niranjan, R.S., Singh, O., Ramkumar, J.: Experimental investigation of forced convection on square micro-pin fins. Springer Singapore (2019). https://doi.org/10.1007/978-981-13-6416-7_11CrossRef

33.

Niranjan, R.S., Singh, O., Ramkumar, J.: Numerical study on thermal analysis of square micro pin fins under forced convection. Heat Mass Transf. Stoffuebertragung 58(2), 263–281 (2022). https://doi.org/10.1007/s00231-021-03105-xCrossRef

34.

Singh, N.R., Onkar, S., Ramkumar, J.: Thermo-hydraulic performance of square micro pin fins under forced convection. Int. J. Heat Technol. 39(1), 170–178 (2021). https://doi.org/10.18280/ijht.390118CrossRef

Title: Geometric optimization of compressor head fin body for effective heat transfer by finite element method
Authors: Sachin M. Shinde
Mohit Diwan
Ramendra Singh Niranjan
Shubhangi Vaikole
R. Ramesh
Publication date: 04-10-2022
Publisher: Springer Paris
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM)
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-022-01062-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner