Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Introduction to Human Robot Interaction Read chapter Read first chapter

2018 | OriginalPaper | Chapter

6. Hardware Capacity—End of Life Perspective

Authors : Bo Xing, Tshilidzi Marwala

Published in: Smart Maintenance for Human–Robot Interaction

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this chapter, we investigate smart maintenance for hardware capacity management from the end of life (EoL) viewpoint. We describe the general knowledge of product recovery and disassembly in Sect. 6.1. Then, in order to demonstrate how smart maintenance strategy can be better implemented in such tangible asset management, in particular, EoL aspect, one representative research avenue is introduced in Sect. 6.2. Section 6.3 summarises this chapter.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now
previous chapter Hardware Capacity—Middle of Life Perspective
next chapter Cyberware Capacity—Platform and Middleware Layers Perspective
Literature
ABB. (2017). Remanufactured customer robot property: extending equipment lifetime. Hydrovägen 10, SE-721 36 Västerås, Sweden: ABB AB Robotics, 9AKK106930A5240.
Afrinaldi, F., Saman, M. Z. M., & Shaharoun, A. M. (2008). The evaluation methods of disassemblability for automotive components-a review and agenda for future research. Jurnal Mekanikal, 26, 49–62.
Aksoy, H. K., & Gupta, S. M. (2002). Capacity and buffer trade-offs in a remanufacturing system. Environ Conscious Manuf II, SPIE, 4569, 167–174.CrossRef
Alatas, B. (2010). Chaotic harmony search algorithms. Applied Mathematics and Computation, 216, 2687–2699.MATHCrossRef
Aleotti, J., & Caselli, S. (2006). Robust trajectory learning and approximation for robot programming by demonstration. Robotics and Autonomous Systems, 54, 409–413.CrossRef
Aleotti, J., & Caselli, S. (2011). Physics-based virtual reality for task learning and intelligent disassembly planning. Virtual Reality, 15, 41–54.CrossRef
AlikhaniKoupaei, J., Hosseini, S. M. M., & Ghaini, F. M. M. (2016). A new optimization algorithm based on chaotic maps and golden section search method. Engineering Applications of Artificial Intelligence, 50, 201–214.CrossRef
Altekin, F. T., Kandiller, L., & Ozdemirel, N. E. (2008). Profit-oriented disassembly-line balancing. International Journal of Production Research, 46(10), 2675–2693.
Andry, P., Gaussier, P., Moga, S., Banquet, J. P., & Nadel, J. (2001). Learning and communication via imitation: An autonomous robot perspective systems. IEEE Transactions on Systems, Man, and Cybernetics—Part A: Systems and Humans, 31(5), 431–442.CrossRef
Aram, Z., Jafari, S., Ma, J., Sprott, J. C., Zendehrouh, S., & Pham, V.-T. (2017). Using chaotic artificial neural networks to model memory in the brain. Communication on Nonlinear Science and Numerical Simulation, 44, 159–449.MathSciNetCrossRef
Argall, B. D., Chernova, S., Veloso, M., & Browning, B. (2009). A survey of robot learning from demonstration. Robotics and Autonomous Systems, 57, 469–483.CrossRef
Argyris, J., Faust, G., Haase, M., & Friedrich, R. (2015). An exploration of dynamical systems and chaos (2nd ed.). Springer Heidelberg New York Dordrecht London: Springer, ISBN 978-3-662-46041-2.
Aritome, S. (2016). Nand flash memory technologies. 111 River Street, Hoboken, NJ 07030: Wiley, Inc., ISBN 978-1-119-13260-8.
Arunkumar, R., & Jothiprakash, V. (2017). Optimal crop plans for a multi-reservoir system having intra-basin water transfer using multi-objective evolutionary algorithms coupled with chaos. Computers and Electronics in Agriculture, 140, 34–47.CrossRef
Babu, B. R., Parande, A. K., & Basha, C. A. (2007). Electrical and electronic waste: A global environmental problem. Waste Management and Research, 25, 307–318.CrossRef
Barton, A. J. (2012). The regulation of mobile health applications. Barton BMC Medicine, 10(46), 1–4.
Bdiwi, M., Rashid, A., & Putz, M. (2016). Autonomous disassembly of electric vehicle motors based on robot cognition. Paper presented at the Proceedings of the IEEE International Conference on Robotics and Automation (ICRA 2016), May 16–21 2016, Stockholm, Sweden, pp. on CD.
Bereketli, I., Genevois, M. E., Albayrak, Y. E., & Ozyol, M. (2011). WEEE treatment strategies’ evaluation using fuzzy LINMAP method. Expert Systems with Applications, 38, 71–79.CrossRef
Berzi, L., Delogu, M., Giorgetti, A., & Pierini, M. (2013). On-field investigation and process modelling of end-of-life vehicles treatment in the context of Italian craft-type authorized treatment facilities. Waste Management, 33, 892–906.CrossRef
Bilbrough, N. R. (2015). The FDA, congress, and mobile health apps: lessons from DSHEA and the regulation of dietary supplements. Maryland Law Review, 74(4), 921–964.
Billard, A. (1999). DRAMA, a connectionist architecture for online learning and control of autonomous robots: Experiments on learning of a synthetic proto-language with a doll robot. 26(1), 59–66.
Billard, A. G., Calinon, S., & Dillmann, R. (2016). Learning from humans. In B. Siciliano & O. Khatib (Eds.), Handbook of robotics (2nd ed.). Berlin: Springer, ISBN 978-3-319-32550-7, Part G, Chapter 74, pp. 1995–2014.
Billard, A., & Dautenhahn, K. (1998). Grounding communication in autonomous robots: An experimental study. Robotics and Autonomous Systems, 24(1–2), 71–79.CrossRef
Billard, A., Epars, Y., Calinon, S., Schaal, S., & Cheng, G. (2004). Discovering optimal imitation strategies. Robotics and Autonomous Systems, 47, 69–77.CrossRef
Billard, A., & Hayes, G. (1999). DRAMA, a connectionist architecture for control and learning in autonomouos robots. Adaptive Behavior, 7(1), 35–63.CrossRef
Bley, H., Reinhart, G., Seliger, G., Bernardi, M., & Korne, T. (2004). Appropriate human involvement in assembly and disassembly. CIRP Annals—Manufacturing Technology, 53(2), 487–509.CrossRef
Brennan, L., Gupta, S. M., & Taleb, K. N. (1994). Operations planning issues in an assembly/disassembly environment. International Journal of Operations and Production Management, 14(9), 57–67.CrossRef
Broer, H., & Takens, F. (2011). Dynamical systems and chaos. 233 Spring Street, New York, NY 10013, USA: Springer Science + Business Media, LLC, ISBN 978-1-4419-6869-2.
Cabrera, F. L. (2008). WEEE and ROHS: are they spurring innovation among small and medium sized electroics businesses in the U.S.? (Master of Science in Environment, Health & Safety Management), Rochester Institute of Technology, Rochester, NY.
Cassells, S. M. (2004). Toward sound management of end-of-life vehicles in New Zealand. (Doctor of Philosophy in Economics), Massey University, Palmerston North, New Zealand.
Castell, A., Clift, R., & France, C. (2004). Extended producer responsibility policy in the European Union: A horse or a camel? Journal of Industrial Ecology, 8(1–2), 4–7.
Chang, M. M. L., Ong, S. K., & Nee, A. Y. C. (2017). AR-guided product disassembly for maintenance and remanufacturing. Procedia CIRP, 61, 299–304.CrossRef
Chen, C. J., Hong, J., & Wang, S. F. (2015). Automated positioning of 3D virtual scene in AR-based assemlby and disassemlby guiding system. International Journal of Advanced Manufacturing Technology, 76, 753–764.CrossRef
Chen, J., Mitrouchev, P., Coquillart, S., & Quaine, F. (2017). Disassembly task evaluation by muscle fatigue estimation in a virtual reality environment. International Journal of Advanced Manufacturing Technology, 88, 1523–1533.CrossRef
Chen, M., & Zhang, F. (2009). End-of-Life vehicle recovery in China: Consideration and innovation following the EU ELV directive. JOM: The Journal of the Minerals, Metals & Materials Society, 61(3), 45–52.
Clift, R., & France, C. (2006). Extended producer responsibility in the EU: A visible March of folly. Journal of Industrial Ecology, 10(4), 5–7.CrossRef
Cull, P., Flahive, M., & Robson, R. (2005). Difference equations: from rabbits to chaos. 233 Spring Street, New York, NY 10013, USA: Springer Science + Business Media, Inc., ISBN 0-387-23234-6.
Danzis, S. D., & Pruitt, C. (2013). Rethinking the FDA’s regulation of mobile medical apps. The SciTech Lawyer, 9(3), 1–5.
Deaves, M. (2003/2004, December/January). Taking the WEEE. IEE Manufacturing Engineer, 38–41.
Devaney, R. L. (2003). An introduction to chaotic dynamical systems (2nd ed.). 5500 Central Avenue, Boulder, Colorado 80301-2877: Westview Press, ISBN 0-8132-4085-3.
Dimitrakakis, E., Janz, A., Bilitewski, B., & Gidarakos, E. (2009). Small WEEE: Determining recyclables and hazardous substances in plastics. Journal of Hazardous Materials, 161, 913–919.CrossRef
Directive 2000/53/EC of the European parliament and of the council of 18th September 2000 on end-of-life vehicles, 21.10.2000 C.F.R.
DTI. (2005). Waste electrical and electronic equipment (WEEE): Innovating novel recovery and recycling technologies in Japan (pp. 1–112): DTI Global Watch Missions.
Du, P., Zhao, J.-Y., Pan, W.-B., & Wang, Y.-G. (2015). GPU accelerated real-time collision handling in virtual disassembly. Journal of Computer Science and Technology, 30(3), 511–518.CrossRef
ElSayed, A., Kongar, E., Gupta, S. M., & Sobh, T. (2012). A robotic-driven disassembly sequence generator for end-of-life electronic products. International Journal of Intelligent Robot System, 68, 43–52.CrossRef
Erramilli, A., Singh, R. P., & Pruthi, P. (1994). Modeling packet traffic with chaotic maps. Stockholm-Kista, Sweden: Royal Institute of Technology. ISRN KTH/IT/R-94/18-SE.
Feldman, D. P. (2012). Chaos and Fractals: An elementary introduction: Oxford University Press, ISBN-13 978-0199566440.
Fernandez, C., Reinoso, O., Vicente, M. A., & Aracil, R. (2006). Part grasping for automated disassembly. The International Journal of Advanced Manufacturing Technology, 30, 540–553.CrossRef
Fisher, R. B., Breckon, T. P., Dawson-Howe, K., Fitzgibbon, A., Robert, C., Trucco, E., & Williams, C. K. I. (2014). Dictionary of computer vision and image processing (2nd ed.). The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, United Kingdom: Wiley, ISBN 978-1-119-94186.
Fister, I., Perc, M., Kamal, S. M., & Fister, I. (2015). A review of chaos-based firefly algorithms: Perspectives and research challenges. Applied Mathematics and Computation, 252, 155–165.MathSciNetMATHCrossRef
Fraige, F. Y., Al-khatib, L. A., Alnawafleh, H. M., Dweirj, M. K., & Langston, P. A. (2012). Waste electric and electronic equipment in Jordan: Willingness and generation rates. Journal of Environmental Planning and Management, 55(2), 161–175.CrossRef
Gamberini, R., Gebennini, E., Manzini, R., & Ziveri, A. (2010). On the integration of planning and environmental impact assessment for a WEEE transportation network—a case study. Resources, Conservation and Recycling, 54, 937–951.CrossRef
Gan, F., & Wang, Y. (2015). Data storage at the nanoscale: advances and applications. 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: CRC Press, Taylor & Francis Group, LLC. ISBN 978-981-4613-20-0.
Gandomi, A. H., Yang, X. S., Talatahari, S., & Alavi, A. H. (2013a). Firefly algorithm with chaos. Commun Nonlinear Sci Numer Simulat, 18, 89–98.MathSciNetMATHCrossRef
Gandomi, A. H., Yun, G. J., Yang, X. S., & Talatahari, S. (2013b). Chaos-enhanced accelerated particle swarm optimization. Commun Nonlinear Sci Numer Simulat, 18, 327–340.MathSciNetMATHCrossRef
Georgiadis, P., & Besiou, M. (2010). Environmental and economical sustainability of WEEE closed-loop supply chains with recycling: A system dynamics analysis. International Journal of Advanced Manufacturing Technology, 47, 475–493.CrossRef
Geraghty, K. (2003). An update on the WEEE and RoHS directives. Circuit World, 29(4), 51–52.CrossRef
Gil, P., Pomares, J., Puente, S. V. T., Diaz, C., Canelas, F., & Torres, F. (2007). Flexible multi-sensorial system for automatic disassembly using cooperative robots. International Journal Computer Integrated Manufacturing, 20(8), 757–772.CrossRef
Go, T. F., Wahab, D. A., Rahman, M. N. A., Ramli, R., & Azhari, C. H. (2011). Disassemblability of end-of-life vehicle: a critical review of evaluation methods. Journal of Cleaner Production, doi: 10.​1016/​j.​jclepro.​2011.​05.​003.
Gokhale, S. S., & Kale, V. S. (2016). An application of a tent map initiated chaotic firefly algorithm for optimal overcurrent relay coordination. Electrical Power and Energy Systems, 78, 336–342.CrossRef
Gottberg, A., Morris, J., Pollard, S., Mark-Herbert, C., & Cook, M. (2006). Producer responsibility, waste minimisation and the WEEE Directive: Case studies in eco-design from the European lighting sector. Science of the Total Environment, 359, 38–56.CrossRef
Govindan, K., Soleimani, H., & Kannan, D. (2015). Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future. European Journal of Operational Research, 240, 603–626.MathSciNetMATHCrossRef
Grunow, M., & Gobbi, C. (2009). Designing the reverse network for WEEE in Denmark. CIRP Annals—Manufacturing Technology, 58, 391–394.CrossRef
Güngör, A., & Gupta, S. M. (1999). Issues in environmentally conscious manufacturing and product recovery: A survey. Computers & Industrial Engineering, 36, 811–853.CrossRef
Güngör, A., & Gupta, S. M. (2002). Disassembly line in product recovery. International Journal of Production Research, 40(11), 2569–2589.MATHCrossRef
Gupta, S. M., Erbis, E., & McGovern, S. M. (2008, 26-27 October). Disassembly sequencing problem: a case study of a cell phone. Paper presented at the SPIE International Conference on Environmentally Conscious Manufacturing IV, October 26–27, Philadelphia, Pennsylvania, pp. 43–52.
Gupta, S. M., & Taleb, K. N. (1994). Scheduling disassembly. International Journal of Production Research, 32(8), 1857–1866.
Harvey, M. J., Altenbach, J. S., & Best, T. L. (2011). Bats of the united states and canada. 2715 North Charles Street, Baltimore, Maryland 21218–4363: The Johns Hopkins University Press, ISBN-13 978-1-4214-0191-1.
Hatcher, G. D., Ijomah, W. L., & Windmill, J. F. C. (2013). Design for remanufactuing in China: A case study of electrical and electronic equipment. Journal of Remanufacturing, 3(3), 1–11.
He, D., He, C., Liang, L., Zhu, H., & Hu, G. (2001). Chaotic characteristic of a one-dimensional iterative map with infinite collapses. IEEE Transactions on Circuits and Systems, 48(7), 900–906.MathSciNetMATHCrossRef
Henriques, E., Peças, P., & Silva, A. (2014). Technology and manufacturing process selection: The product life cycle perspective. London Heidelberg New York Dordrecht: Springer-Verlag London, ISBN 978-1-4471-5543-0.
Hilborn, R. C. (2000). Chaos and nonlinear dynamics: an introduction for scientists and engineers (2nd ed.). New York, United States: Oxford University Press, ISBN 0 19 850723 2.
Hirsch, M. W., Smale, S., & Devaney, R. L. (2015). Differential equations, dynamical systems, and an introduction to chaos. 225 Wyman Street, Waltham, MA 02451, USA: Academic Press, Elsevier Inc., ISBN 978-0-12-382010-5.
Hong, Y. J., Kim, I. J., Ahn, S. C., & Kim, H. G. (2010). Mobile health monitoring system based on activity recognition using accelerometer. Simulation Modelling Practice and Theory, 18, 446–455.CrossRef
Huang, L., Ding, S., Yu, S., Wang, J., & Lu, K. (2016). Chaos-enhanced cuckoo search optimization algorithms for global optimization. Applied Mathematical Modelling, 40, 3860–3875.MathSciNetCrossRef
Ilgin, M. A., & Gupta, S. M. (2010a). Comparison of economic benefits of sensor embedded products and conventional products in a multi-product disassembly line. Computers & Industrial Engineering, 59, 748–763.CrossRef
Ilgin, M. A., & Gupta, S. M. (2010b). Environmentally conscious manufacturing and product recovery (ECMPRO): A review of the state of the art. Journal of Environmental Management, 91, 563–591.CrossRef
Inderfurth, K., & Langella, I. M. (2006). Heuristics for solving disassemble-to-order problems with stochastic yields. OR Spectrum, 28, 73–99.MATHCrossRef
Jang, Y.-C., & Kim, M. (2010). Management of used & end-of-life mobile phones in Korea: A review. Resources, Conservation and Recycling, 55, 11–19.CrossRef
Johansson, J., & Luttropp, C. (2009). Material hygiene: Improving recycling of WEEE demonstrated on dishwashers. Journal of Cleaner Production, 17, 26–35.CrossRef
Johnson, M. R. (2002). Evaluating remanufacturing and demanufacturing for extended producer responsibility & sustainable product management. (Doctor of Philosophy), University of Windsor, Windsor, Ontario, Canada.
Johnson, M. R., & Wang, M. H. (1995). Planning product disassembly for material recovery opportunities. International Journal of Production Research, 33(11), 3119–3142.MATHCrossRef
Joung, H.-T., Cho, S.-J., Seo, Y.-C., & Kim, W.-H. (2007). Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea. Journal of Material Cycles and Waste Management, 9, 159–166.CrossRef
Jovane, F., Alting, L., Armillotta, A., Eversheim, W., Feldmann, K., Seliger, G., et al. (1993). A key issue in product life cycle: Disassembly. Annals of the CIRP, 42(2), 651–658.CrossRef
Kaebernick, H., O’Shea, B., & Grewal, S. S. (2000). A method for sequencing the disassembly of products. CIRP Annals—Manufacturing Technology, 49(1), 13–16.CrossRef
Kang, J.-G., & Xirouchakis, P. (2006). Disassembly sequencing for maintenance: A survey. Proceedings of the Institution of Mechanical Engineers Part B: J. Engineering Manufacture, 220, 1697–1716.
Kara, S., Pornprasitpol, P., & Kaebernick, H. (2006). Selective disassembly sequencing: a methodology for the disassembly of end-of-life products. CIRP Annals—Manufacturing Technology, 55(1), 37–40.
Kazmierczak, K., Mathiassen, S. E., Forsman, M., & Winkel, J. (2005). An integrated analysis of ergonomics and time consumption in Swedish ‘craft-type’ car disassembly. Applied Ergonomics, 36(3), 263–273.CrossRef
Kibert, N. C. (2004). Extended producer responsibility: A tool for achieving sustainable development. Journal of Land Use, 19(2), 503–523.
Kim, K.-H., Joung, H.-T., Nam, H., Seo, Y.-C., Hong, J. H., Yoo, T.-W., et al. (2004). Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea. Waste Management, 24, 533–540.CrossRef
Kim, H.-J., Lee, D.-H., & Xirouchakis, P. (2006). Two-phase heuristic for disassembly scheduling with multiple product types and parts commonality. International Journal of Production Research, 44(1), 195–212.CrossRef
Kim, H.-J., Lee, D.-H., & Xirouchakis, P. (2007). Disassembly scheduling: literature review and future research directions. International Journal of Production Research, 45(18–19), 4465–4484.MATHCrossRef
Kim, H.-J., Lee, D.-H., Xirouchakis, P., & Züst, R. (2003). Disassembly scheduling with multiple product types. CIRP Annals—Manufacturing Technology, 52, 403–406.CrossRef
Kim, H.-J., & Xirouchakis, P. (2010). Capacitated disassembly scheduling with random demand. International Journal of Production Research, 48(23), 7177–7194.MATHCrossRef
Kim, H., Yang, J., & Lee, K.-D. (2009). Vehicle routing in reverse logistics for recycling end-of-life consumer electronic goods in South Korea. Transportation Research Part D, 14, 291–299.CrossRef
King, A. M., & Burgess, S. C. (2005). The development of a remanufacturing platform design: A strategic response to the directive on waste electrical and electronic equipment. Proceedings of the Institution of Mechanical Engineers Part B: J. Engineering Manufacture, 219, 623–631.
King, A. M., Burgess, S. C., Ijomah, W., & McMahon, C. A. (2006). Reducing waste: Repair, recondition, remanufacture or recycle? Sustainable Development, 14, 257–297.CrossRef
Kizilkaya, E. A., & Gupta, S. M. (2004). Modeling operational behavior of a disassembly line. Paper presented at the Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV, October 26–27 , Philadelphia, PA.
Kojima, M., Yoshida, A., & Sasaki, S. (2009). Difficulties in applying extended producer responsibility policies in developing countries: Case studies in e-waste recycling in China and Thailand. Journal of Material Cycles and Waste Management, 11, 263–269.CrossRef
Kongar, E., & Gupta, S. M. (2006). Disassembly to order system under uncertainty. OMEGA, 34, 550–561.CrossRef
Kongar, E., & Gupta, S. M. (2009). Solving the disassembly-to-order problem using linear physical programming. International Journal of Mathematics in Operational Research, 1, 504–531.MATHCrossRef
Kopacek, B., & Kopacek, P. (2002). A semi-automatised disassembly cell for printed circuit boards. Problems of Engineering Cybernetics and Robotics, 53, 10–14.
Kopacek, P., & Kronreif, G. (1996). Semi-automated robotized disassembling of personal computers. Paper presented at the Proceedings of 1996 IEEE Conference on Emerging Technologies and Factory Automation (EFTA’96), pp. 567–572.
Kopaeek, B., & Kopaeek, P. (1999). Intelligent disassembly of electronic equipment. Annual Reviews in Control, 23, 165–170.CrossRef
Kuren, M. B.-V. (2006). Flexible robotic demanufacturing using real time tool path generation. Robotics and Computer-Integrated Manufacturing, 22(1), 17–24.CrossRef
Lambert, A. J. D. (1999). Linear programming in disassembly/clustering sequence generation. Computers & Industrial Engineering, 36, 723–738.CrossRef
Lambert, A. J. D. (2003). Disassembly sequencing: A survey. International Journal of Production Research, 41(16).
Lambert, A. J. D., & Gupta, S. M. (2002). Demand-driven disassembly optimization for electronic products. Journal of Electronics Manufacturing, 11, 121–135.CrossRef
Lee, J. (2014). Hype or hope for diabetes mobile health applications. DiabetesVoice, September 2014, Vol 59 Issue 3, pp. 43–46.
Lee, D.-H., Xirouchakis, P., & Züst, R. (2002). Disassembly scheduling with capacity constraints. CIRP Annals—Manufacturing Technology, 51, 387–390.CrossRef
Leigh, N. G., Realff, M. J., Ai, N., French, S. P., Ross, C. L., & Bras, B. (2007). Modeling obsolete computer stock under regional data constraints: An Atlanta case study. Resources, Conservation and Recycling, 51, 847–869.CrossRef
Lin, H.-Y. (2015). Improved chaotic maps-based password-authenticated key agreement using smart cards. Communication on Nonlinear Science and Numerical Simulation, 20, 482–488.MATHCrossRef
Lindhqvist, T. (2000). Extended producer responsibility in cleaner production: Policy principle to promote environmental improvement of product systems. (Doctor of Philosophy), Lund University, Lund, Sweden. (IIIEE Dissertations 2000:2).
Liu, H., Abraham, A., & Clerc, M. (2007). Chaotic dynamic characteristics in swarm intelligence. Applied Soft Computing, 7, 1019–1026.CrossRef
Liu, J., Cramer, S. C., & Reinkensmeyer, D. J. (2006). Learning to perform a new movement with robotic assistance: Comparison of haptic guidance and visual demonstration. Journal of NeuroEngineering and Rehabilitation, 3(20), 1–10.
Liu, B., Wang, L., Jin, Y. H., Tang, F., & Huang, D. X. (2005). Improved particle swarm optimization combined with chaos. Chaos, Solitons & Fractals, 25(5), 1261–1271.MATHCrossRef
Lorenz, A., & Oppermann, R. (2009). Mobile health monitoring for the elderly: Designing for diversity. Pervasive and Mobile Computing, 5, 478–495.CrossRef
Mahmoudzadeh, M., Mansour, S., & Karimi, B. (2013). To develop a third-party reverse logistics network for end-of-life vehicles in Iran. Resources, Conservation and Recycling, 78, 1–14.CrossRef
Marwala, T., & Xing, B. (2011, November). The role of remanufacturing in building a developmental state. The Thinker: For the Thought Leaders ( www.​thethinker.​co.​za ), 33, 18–20.
May, R. (1976). Simple mathematical models with very complicated dynamics. Nature, 261, 459–467.MATHCrossRef
McGovern, S. M., & Gupta, S. M. (2007). A balancing method and genetic algorithm for disassembly line balancing. European Journal of Operational Research, 179, 692–708.MATHCrossRef
McGovern, S. M., & Gupta, S. M. (2011). The disassembly line balancing and modeling: The McGraw-Hill Companies, Inc., ISBN 978-0-07-162605-7.
Milanez, B., & Bührs, T. (2009). Extended producer responsibility in Brazil: The case of tyre waste. Journal of Cleaner Production, 17, 608–615.CrossRef
Minca, E., Filipescu, A., & Voda, A. (2014). Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator. Control Engineering Practice, 31, 50–62.CrossRef
Mirjalili, S., Mirjalili, S. M., & Lewis, A. (2014). Grey wolf optimizer. Advances in Engineering Software, 69, 46–61.CrossRef
Mitić, M., Vuković, N., Petrović, M., & Miljković, Z. (2015). Chaotic fruit fly optimization algorithm. Knowledge-Based Systems, 89, 446–458.CrossRef
Mitić, M., Vuković, N., Petrović, M., & Miljković, Z. (in press). Chaotic metaheuristic algorithms for learning and reproduction of robot motion trajectories. Neural Computing and Applications, DOI 10.​1007/​s00521-016-2717-6.
Mok, H. S., Kim, H. J., & Moon, K. S. (1997). Disassemblability of mechanical parts in automobile for recycling. Computers & Industrial Engineering, 33(3–4), 621–624.CrossRef
Morley, D., & Parker, C. S. (2015). Understanding computers: today and tomorrow (15th ed.). 200 First Stamford Place, 4th Floor Stamford, CT 06902, USA: Cengage Learning, ISBN 978-1-285-76727-7.
Mukherjee, A., & Mukherjee, V. (2016). Chaos embedded krill herd algorithm for optimal VAR dispatch problem of power system. Electrical Power and Energy Systems, 82, 37–48.CrossRef
Nahman, A. (2010). Extended producer responsibility for packaging waste in South Africa: Current approaches and lessons learned. Resources, Conservation and Recycling, 54, 155–162.CrossRef
Nolte, D. D. (2015). Introduction to modern dynamics: Chaos, networks, space and time. Great Clarendon Street, Oxford, OX2 6DP, United Kingdom Oxford University Press, ISBN 978–0–19–965703–2.
Ott, E. (2002). Chaos in Dynamical Systems (2nd ed.). Cambridge, UK: Cambridge University Press, ISBN 0 521 81196 1.
Parlikad, A. K., McFarlane, D., Fleisch, E., & Gross, S. (2003). The role of product identity in end-of-life decision making. Cambridge, Unite Kingdom: University of Cambridge.
Peitgen, H.-O., Jurgens, H., & Saupe, D. (1992). Chaos and fractals: New frontiers of science: Springer Science + Business Media New York, ISBN 978-1-4757-4742-3.
Penev, K. D., & Ron, A Jd. (1996). Determination of a disassembly strategy. International Journal of Production Research, 34(2), 495–506.MATHCrossRef
Plattner, H. (2013). A course in in-memory data management: the inner mechanics of in-memory databases. Berlin Heidelberg: Springer-Verlag, ISBN 978-3-642-36523-2.
Plattner, H., & Schapranow, M.-P. (2014). High-performance in-memory genome data analysis: how in-memory databased technology accelerates personalized medicine. Cham Heidelberg New York Dordrecht London: Springer International Publishing Switzerland, ISBN 978-3-319-03034-0.
Plattner, H., & Zeier, A. (2012). In-memory data management: technology and applications (2nd ed.). Springer Heidelberg New York Dordrecht London: Springer-Verlag, ISBN 978-3-642-29574-4.
Qiang, C. Z., Yamamichi, M., Hausman, V., & Altman, D. (2011). Mobile applications for the health sector: World Bank-ICT Sector Unit, pp, 1–101.
Quariguasi-Frota-Neto, J., & Bloemhof, J. (2012). An analysis of the eco-efficiency of remanufactured personal computers and mobile phones. Production and Operations Management, 21(1), 101–114.CrossRef
Quick, D., Martini, B., & Choo, K.-K. R. (2014). Cloud storage forensics. 225 Wyman Street, Waltham, MA 02451, USA: Syngress, Elsevier Inc., ISBN 978-0-12-419970-5.
Ranky, P. G., Morales, L. C., & Caudill, R. J. (2003). Lean disassembly line layout, and network simulation models. Paper presented at the Proceedings of the 2003 IEEE International Symposium on Electronics and the Environment, pp. 36–41.
Ravi, S., Sudheer, G., & Brian, T. (2009). Product design and supply chain coordination under extended producer responsibility. Production and Operations Management, 18(3), 259–277.CrossRef
Rose, C. M. (2000). Design for environment: a method for formulating product end-of-life strategies. (Doctoral Thesis), Stanford University.
Rossem, C. v., Tojo, N., & Lindhqvist, T. (2006). Extended producer responsibility: an examination of its impact on innovation and greening products (pp. 55): Greenpeace International, Friends of the Earth and the European Environmental Bureau (EEB).
Saavedra, Y. M. B., Barquet, A. P. B., Rozenfeld, H., Forcellini, F. A., & Ometto, A. R. (2013). Remanufacturing in Brazil: Case studies on the automotive sector. Journal of Cleaner Production, 53, 267–276.CrossRef
Sakai, S.-I., Noma, Y., & Kida, A. (2007). End-of-life vehicle recycling and automobile shredder residue management in Japan. Journal Mater Cycles Waste Management, 9, 151–158.CrossRef
Sawyer-Beaulieu, S. S., & Tam, E. K. L. (2006). Regulation of end-of-life vehicle (ELV) retirement in the US compared to Canada. International Journal of Environmental Studies, 63(4), 473–486.CrossRef
Schmidt, G., Kron, A., & Hoogen, J. (2003). Tele-assembly and disassembly in real and virtual environments: concepts, systems, and applications. IFAC Proceedings, 36(23), 1–12.CrossRef
Scholz-Reiter, B., Scharke, H., & Hucht, A. (1999). Flexible robot-based disassembly cell for obsolete TV-sets and monitors. Robotics and Computer Integrated Manufacturing, 15, 247–255.CrossRef
Schumacher, P., & Jouaneh, M. (2013). A system for automated disassembly of snap-fit covers. International Journal of Advanced Manufacturing Technology, 69(9–12), 2055–2069.CrossRef
Seliger, G., Franke, C., Ciupek, M., & Basdere, B. (2004). Process and facility planning for mobile phone remanufacturing. CIRP Annals—Manufacturing Technology, 53(1), 9–12.CrossRef
Soloman, S. (2010). Sensors and control systems in manufacturing (2nd ed.). New York Chicago San Francisco: The McGraw-Hill Companies, Inc., ISBN 978-0-07-160573-1.
Sørensen, B. (2011). Life-cycle analysis of energy systems: from methdology to applications. Thomas Graham House, Science Park, Milton Road, Cambridge CB4 0WF, UK: The Royal Society of Chemistry, ISBN 978-1-84973-145-4.
Spengler, T., Ploog, M., & Schröter, M. (2003). Integrated planning of acquisition, disassembly and bulk recycling: A case study on electronic scrap recovery. OR Spectrum, 25, 413–442.MATH
Spicer, A. J., & Johnson, M. R. (2004). Third-party demanufacturing as a solution for extended producer responsibility. Journal of Cleaner Production, 12, 37–45.CrossRef
Steinhilper, R. (1998). Remanufacturing: The ultimate form of recycling. Stuttgart, Germany: Fraunhofer IRB Verlag.
Stephens, J. (2016). Data recovery guide: Backup, recover, restore before you lose your mind: ISBN 978-1-522-76065-8.
Subramanian, R., Gupta, S., & Talbot, B. (2009). Product design and supply chain coordination under extended producer responsibility. Production and Operations Management, 18(3), 259–277.CrossRef
Suleman, M. U., & Awais, M. M. (2011). Learning from demonstration in robots: Experimental comparison of neural architecture. Robotics and Computer-Integrated Manufacturing, 27, 794–801.CrossRef
Sun, J., Zhu, X., Zhang, C., & Fang, Y. (2012). Security and privacy for mobile health-care (m-Health) systems. In S. K. Das, K. Kant & N. Zhang (Eds.), Handbook on securing cyber-physical critical infrastructure. 225 Wyman Street, Waltham, MA 02451, USA: Elsevier, ISBN 978-0-12-415815-3, Chapter 27, pp. 677–704.
Tang, Y., & Zhu, M. (2007). Learning-embedded disassembly Petri Net for process planning. Paper presented at the Proceedings of IEEE International Conference on Systems, Man and Cybernetics (SCM’06), 8–11 October 2006, Taipei, Taiwan, pp. on CD.
Tavazoei, M. S., & Haeri, M. (2007). Comparison of different one-dimensional maps as chaotic search pattern in chaos optimization algorithms. Applied Mathematics and Computation, 187, 1076–1085.MathSciNetMATHCrossRef
Toffel, M. W. (2004). Strategic management of product recovery. California Management Review, 46(2), 120–141.CrossRef
Tomida, A. G. (2008). Matlab toolbox and gui for analyzing one-dimensional chaotic maps. Paper presented at the Proceedings of IEEE International Conference on Computational Sciences and Its Applications (ICCSA), 30 June–03 July, 2008, Perugia, Italy, pp. 321–330.
Torres, F., Gil, P., Puente, S. T., Pomares, J., & Aracil, R. (2004). Automatic PC disassembly for component recovery. International Journal of Advanced Manufacturing Technology, 23, 39–46.CrossRef
Torres, F., & Puente, S. (2006). Intelligent disassembly in the demanufacturing process. International Journal of Advanced Manufacturing Technology, 30, 479–480.CrossRef
Tsai, W.-H., & Hung, S.-J. (2009). Treatment and recycling system optimisation with activity-based costing in WEEE reverse logistics management: an environmental supply chain perspective. International Journal of Production Research, 47(19), 5391–5420.MATHCrossRef
Ullerich, C. (2014). Advanced disassembly planning: flexible, price-quantity dependent, and multi-period planning approaches: Springer Fachmedien Wiesbaden, ISBN 978-3-658-03117-6.
Varshney, U. (2014). Mobile health: Four emerging themes of research. Decision Support Systems, 66, 20–35.CrossRef
Vialar, T. (2009). Complex and chaotic nonlinear dynamics: Advances in economics and finance, mathematics and statistics. Berlin Heidelberg: Springer-Verlag, ISBN 978-3-540-85977-2.
Vital Wave Consulting. (2009). mHealth for devleopment: The opportunity of mobile technology for healthcare in the devleoping world: UN Foundation-Vodafone.
Vongbunyong, S., & Chen, W. H. (2015). Disassembly automation: Automated systems with cognitive abilities. Cham Heidelberg New York Dordrecht London: Springer International Publishing Switzerland, ISBN 978-3-319-15183-0.
Vongbunyong, S., Kara, S., & Pagnucco, M. (2013). Application of cognitive robotics in disassembly of products. CIRP Annals—Manufacturing Technology, 62, 31–34.CrossRef
Vongbunyong, S., Kara, S., & Pagnucco, M. (2015). Learning and revision in cognitive robotics disassembly automation. Robot and computer-Integrated Manufacturing, 35, 79–94.CrossRef
Vongbunyong, S., Vongseela, P., & Sreerattana-aporn, J. (2017). A process demonstration platform for product disassembly skills transfer. Procedia CIRP, 61, 281–286.CrossRef
Walther, G., & Spengler, T. (2005). Impact of WEEE-directive on reverse logistics in Germany. International Journal of Physical Distribution & Logistics Management, 35(5), 337–361.CrossRef
Walther, G., Steinborn, J., Spengler, T. S., Luger, T., & Herrmann, C. (2010). Implementation of the WEEE-directive—economic effects and improvement potentials for reuse and recycling in Germany. International Journal of Advanced Manufacturing Technology, 47, 461–474.CrossRef
Wan, H.-D., & Gonnuru, V. K. (2013). Disassembly planning and sequencing for end-of-life products with RFID enriched information. Robotics and Computer-Integrated Manufacturing, 29, 112–118.CrossRef
Wang, L., & Chen, M. (2013). Policies and perspective on end-of-life vehicles in China. Journal of Cleaner Production, 44, 168–176.CrossRef
WEEE_Directive. (2003). Directive 2002/96/EC of the European Parliament and of the Council of 27th January 2003 on waste electrical and electronic equipment (WEEE): Official Journal of the European Union, Lo37, pp. 24–39.
Wegener, K., Chen, W. H., Dietrich, F., Dröder, K., & Kara, S. (2015). Robot assisted disassembly for the recycling of electric vehicle batteries. Procedia CIRP, 29, 716–721.CrossRef
Weigl-Seitz, A., Hohm, K., Seitz, M., & Tolle, H. (2006). On strategies and solutions for automated disassembly of electronic devices. The International Journal of Advanced Manufacturing Technology, 30, 561–573.CrossRef
Wiggins, S. (1990). Introduction to applied nonlinear dynamical systems and chaos. New York: Springer-Verlag.MATHCrossRef
Wiggins, S. (2003). Introduction to applied nonlinear dynamical systems and chaos (2nd ed.). New York: Springer-Verlag.MATH
Williams, J. A. S. (2007). A review of research towards computer integrated demanufacturing for materials recovery. International Journal of Computer Integrated Manufacturing, 20(8), 773–780.CrossRef
Williams, J., Shu, L., & Murayama, T. (2000). Current status of extended producer responsibility legislation and effects on product design. Paper presented at the ASME Japan-USA Symposium on Flexible Automation, Paper Number 2000JUSFA-13000, Ann Arbor, MI, USA.
Wilson, J. S. (2005). Sensor technology handbook. 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA: Newnes, Elsevier Inc., ISBN 0-7506-7729-5.
World Health Organization. (2011). mHealth: New horizons for health through mobile technologies: Global Observatory for eHealth series (Vol. 3). Geneva: WHO.
Wright, D. (2011). Software life cycle management standards: Real-world scenarios and solutions for savings. Unit 3, Clive Court, Bartholomew’s walk, Cambridgeshire Business Park, Cambridgeshire CB7 4EH, UK: IT Governance Publishing, ISBN 978-1-84928-205-5.
Xing, B. (2016). The spread of innovatory nature originated metaheuristics in robot swarm control for smart living environments. In H. E. P. Espinosa (Ed.), Nature-Inspired Computing for Control Systems. Cham Heidelberg New York Dordrecht London: Springer International Publishing Switzerland, ISBN 978-3-319-26228-4, Chapter 3, pp. 39–70.
Xing, B. (2017). Protecting mobile payments security: a case study. In W. Meng, X. Luo, S. Furnell & J. Zhou (Eds.), Protecting Mobile Networks and Devices: Challenges and Solutions. 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: CRC Press, Taylor & Francis Group, LLC, ISBN 978-1-4987-3583-4.
Xing, B., & Gao, W.-J. (2014a). Computational intelligence in remanufacturing. 701 E. Chocolate Avenue, Suite 200, Hershey PA 17033: IGI Global, ISBN 978-1-4666-4908-8.
Xing, B., & Gao, W.-J. (2014b). Innovative computational intelligence: A rough guide to 134 clever algorithms. Cham Heidelberg New York Dordrecht London: Springer International Publishing Switzerland, ISBN: 978-3-319-03403-4.
Xu, Q., Wang, S., Zhang, L., & Liang, Y. (2013). A novel chaos danger model immune algorithm. Communication on Nonlinear Science and Numerical Simulation, 18, 3046–3060.MathSciNetMATHCrossRef
Yang, G. (2007). Life cycle reliability engineering. 111 River Street, Hoboken, NJ 07030: John Wiley & Sons, Inc., ISBN 978-0-471-71529-0.
Yang, X.-S. (2010a). A new metaheuristic bat-inspired clgorithm. Paper presented at the Nature Inspired Cooperative Strategies for Optimization (NISCO 2010). Studies in Computational Intelligence, SCI, 284, 65–74.CrossRef
Yang, X. S. (2010b). Engineering optimization: An introduction with metaheuristic applications. Hoboken, New Jersey: John Wiley & Sons, Inc., ISBN 978-0-470-58246-6.
Yang, X.-S. (2011). Chaos-enhanced firefly algorithm with automatic parameter tuning. International Journal of Swarm Intelligence Research, 2(4), 1–11.CrossRef
Yang, X.-S. (2013). Bat algorithm: Literature review and applications. International Journal of Bio-Inspired Computation, 5(3), 141–149.CrossRef
Yang, Y., Wang, Y., Yuan, X., & Yin, F. (2012). Hybrid chaos optimization algorithm with artificial emotion. Applied Mathematics and Computation, 218, 6585–6611.MATHCrossRef
Yeh, W.-C. (2012). Simplified swarm optimization in disassembly sequencing problems with learning effects. Computers & Operations Research, 39, 2168-2177.
Yetisen, A. K., Martinez-Hurtado, J. L., Vasconcellos, F. d. C., Simsekler, M. C. E., Akram, M. S., & Lowe, C. R. (2013). The regulation of mobile medical applications. Lab on a Chip, DOI: 10.​1039/​c3lc51235e.
Yu, J., Hills, P., & Welford, R. (2008). Extended producer responsibility and eco-design changes: Perspectives from China. Corporate Social Responsibility and Environmental Management, 15, 111–124.CrossRef
Yu, J., Welford, R., & Hills, P. (2006). Industry responses to EU WEEE and ROHS Directives: Perspectives from China. Corporate Social Responsibility and Environmental Management, 13, 286–299.CrossRef
Zeid, I., Gupta, S. M., & Bardasz, T. (1997). A case-based reasoning approach to planning for disassembly. Journal of Intelligent Manufacturing, 8, 97–106.CrossRef
Zhang, W., & Roberts, P. (2007). Report: Integrated industrial waste management systems in China. Waste Management and Research, 25, 288–295.CrossRef
Zoeteman, B. C. J., Krikke, H. R., & Venselaar, J. (2010). Handling WEEE waste flows: On the effectiveness of producer responsibility in a globalizing world. International Journal of Advanced Manufacturing Technology, 47, 415–436.CrossRef
Metadata
Title
Hardware Capacity—End of Life Perspective
Authors
Bo Xing
Tshilidzi Marwala
Copyright Year
2018
Book
Smart Maintenance for Human–Robot Interaction

Print ISBN: 978-3-319-67479-7

Electronic ISBN: 978-3-319-67480-3

Copyright Year: 2018

DOI
https://doi.org/10.1007/978-3-319-67480-3_6