Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Fundamentals of Cold Spray Processing: Evolution and Future Perspectives Read chapter Read first chapter

2018 | OriginalPaper | Chapter

14. High Temperature Oxidation Performance of Cold Spray Coatings

Author : Lingyan Kong

Published in: Cold-Spray Coatings

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Cold spray coatings have shown great corrosion protections due to the intrinsic dense character of the sprayed material. However, these types of coatings do not get wide application in low-temperature corrosion for their economical inferiority compared to other alternative coating technologies. For this reason, the other possible application for cold spray corrosion coatings needs to be developed, such as high-temperature oxidation resistance coatings on titanium-based alloys. The titanium-based alloys such as orthorhombic Ti2AlNb and γ-TiAl-based alloys are considered as potential structural materials for high-temperature applications in aeroengines, but they still suffered from oxidation and environmental embrittlement at elevated temperatures. Coatings represent an effective way to solve the problems. However, the available coatings do not meet the requirements of titanium-based alloys for many reasons. In this chapter, the use of cold spray technology for preparing TiAl3, TiAl3/Al, TiAl3/Al2O3, and TiAlSi coatings on titanium-based alloys and their behaviors at high temperatures are reviewed. This chapter is mainly divided into four parts, including the background of the study, the coating preparations, the coating characterization, and the high temperature performance of the coatings. The main results of the investigations showed that the TiAl3 composite coatings prepared by cold spray exhibited great improvement for the oxidation of substrate alloys, which is different from those prepared by other available technologies. The coating protection and degradation mechanisms are analyzed. Comparison of TiAl3 composite coatings prepared by cold spray and other technologies is also discussed.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter Corrosion Resistance of Cold-Sprayed Coatings
next chapter Understanding Adhesion
Literature
Berti S, Shaw BA, Shaw WW (2002) Corrosion evaluation of aluminum sacrificial coatings applied by various sprayed metal techniques. Corrosion, Houston
Braun R, Rovere F, Mayrhofer PH et al (2010) Environmental protection of γ-TiAl based alloy Ti-45Al-8Nb by CrAlYN thin films and thermal barrier coatings. Intermetallics 18:479–486CrossRef
Braun R, Kelm K, Frohlich M, Leyens C (2013) Oxidation resistance of gamma-TiAl based alloy Ti-45Al-8Nb coated with intermetallic Ti-Al-Cr-Y layers and EB- PVD zirconia topcoats at 950 degrees in air. Surf Coat Technol 222:128–134CrossRef
Chen WR, Irissou E, Wu X et al (2011) The oxidation behavior of TBC with cold spray CoNiCrAlY bond coat. J Therm Spray Technol 20:132–138CrossRef
Chu MS, Wu SK (2003) The improvement of high temperature oxidation of Ti-50Al by sputtering Al film and subsequent interdiffusion treatment. Acta Mater 51:3109–3120CrossRef
Danielewski M, Mrowec S, Stokosa A et al (1980) Defect structure and diffusion in nonstoichiometric ferrous sulphide. Solid State Ion 1:287–309CrossRef
Gao J, He Y, Gao W (2012) Electro-codeposition of Al2O3–Y2O3 composite thin film coatings and their high-temperature oxidation resistance on γ-TiAl alloy. Thin Solid Films 520:2060–2065CrossRef
Goral M, Swadzba L, Moskal G et al (2009) Si-modified aluminide coatings deposited on Ti46Al7Nb alloy by slurry method. Intermetallics 17:965–967CrossRef
Kaur N, Kumar M, Sanjeev K et al (2015) Study of mechanical properties and high temperature oxidation behavior of a novel cold-spray Ni-20Cr coating on boiler steels. Appl Surf Sci 328:13–25CrossRef
Kong LY, Qi JZ, Lu B et al (2010) Oxidation resistance of TiAl3–Al composite coating on orthorhombic Ti2AlNb based alloy. Surf Coat Technol 204:2262–2267CrossRef
Kothari K, Radhakrishnan R, Wereley N (2012) Advances in gamma titanium aluminides and their manufacturing techniques. Prog Aerosp Sci 55:1–16CrossRef
Lee HY, Yu YH, Lee YC et al (2004) Interfacial studies between cold-sprayed WO3, Y2O3 films and Si substrate. Appl Surf Sci 227:244–249CrossRef
Leyens C, Braun R, Fröhlich M et al (2006) Recent progress in the coating protection of gamma titanium aluminides. JOM 58:17–21CrossRef
Li ZW, Gao W, Ying DY et al (2003) Improved oxidation resistance of Ti with a thermal sprayed Ti3Al(O)-Al2O3 composite coating. Scr Mater 48:1649–1653CrossRef
Lima CRC, Belém MJX, Crespo V et al (2015) High Temperature Oxidation of Cold Gas Sprayed Bond Coats for TBC Application. ITSC 2015-Pro. Inter Therm Spray Confer, Long Beach, California, USA
Miyake M, Tajikara S, Hirato T (2011) Fabrication of TiAl3 coating on TiAl-based alloy by Al electrodeposition from dimethylsulfone bath and subsequent annealing. Surf Coat Technol 205:5141–5146CrossRef
Murray JL (1987) Diagrams of binary titanium alloys. ASM International, Materials Park, Ohio
Niraj B, Harpreet S, Prakash S (2010) Accelerated hot corrosion studies of cold spray Ni–50Cr coating on boiler steels. Mater Design 31:244–253CrossRef
Pflumm R, Friedle S, Schütze M (2015) Oxidation protection of γ-TiAl-based alloys. Intermetallics 56:1–14CrossRef
Rahmel A, Schütze M, Quadakkers W (1995) Fundamentals of TiAl oxidation–a critical review. Mater Corros 46:271–285CrossRef
Sasaki T, Yagi T, Watanabe T et al (2011) Aluminizing of TiAl-based alloy using thermal spray coating. Surf Coat Technol 205:3900–3904CrossRef
Shen L (2008). Investigation on cold gas dynamic sprayed TiAl3-Al composite coating and its oxidation resistance. Dissertation, Institute of Metal Reaserch
Smialek JL (1993) Oxidation behavior of TiAl3 coatings and alloys. Corros Sci 35:1199–1208CrossRef
Swadzba L, Moskal G, Hetmanczyk M et al (2004) Long-term cyclic oxidation of Al–Si diffusion coatings deposited by arc-PVD on TiAlCrNb alloy. Surf Coat Technol 184:93–101CrossRef
Tao YS, Xiong TY, Sun C et al (2009) Effect of a-Al2O3 on the properties of cold sprayed Al/a-Al2O3 composite coatings on AZ91D magnesium alloy. Appl Surf Sci 256:261–266CrossRef
Van Loo FJJ, Rieck GD (1973a) Diffusion in the titanium-aluminum system--I. Interdiffusion between solid Al and Ti or Ti-Al alloys. Acta Metall 21:61–71CrossRef
Van Loo FJJ, Rieck GD (1973b) Diffusion in the titanium-aluminium system--II. Interdiffusion in the composition range between 25 and 100 at.% Ti. Acta Metall 21:73–84CrossRef
Varlese FA, Tului M, Sabbadini S et al (2013) Optimized coating procedure for the protection of TiAl intermetallic alloy against high temperature oxidation. Intermetallics 37:76–82CrossRef
Victor KC (2007) The cold spray materials deposition process fundamentals and applications. WP, New York
Wang JQ, Kong LY, Li TF et al (2015) Microstructure Evolution of Cold- Sprayed Al - Si Alloy Coatings on γ-TiAl During Heat Treatment. J Therm Spray Technol 24:1071–1080CrossRef
Wang JQ (2016) Study of silicon-aluminizing coating prepared by cold spray and subsequent heat-treatment. Dissertation, Institute of Metal Research
Wolfe D, Eden T (2007) Cold spray particle deposition for improved wear resistance. In: Victor KC (ed) The cold spray materials deposition process fundamentals and applications. WP, New York
Xiang ZD, Rose SR, Datta PK (2002) Pack deposition of coherent aluminide coatings on γ-TiAl for enhancing its high temperature oxidation resistance. Surf Coat Technol 161:286–292CrossRef
Xiang Z, Rose S, Datta P (2003) Codeposition of Al and Si to form oxidation-resistant coatings on γ-TiAl by the pack cementation process. Mater Chem Phys 80:482–489CrossRef
Xiong HP, Mao W, Xie YH et al (2004) Liquid-phase siliconizing by Al-Si alloys at the surface of a TiAl-based alloy and improvement in oxidation resistance. Acta Mater 52:2605–2620CrossRef
Xiong HP, Wei M, Xie YH et al (2005) Formation of silicide coatings on the surface of a TiAl-based alloy and improvement in oxidation resistance. Mater Sci Eng A 391:10–18CrossRef
Xu Y, Miao Q, Liang W et al (2014) A comparison of oxidation behavior of Al coatings prepared by magnetron sputtering and arc ion plating on γ-TiAl. Rare Met Mater Eng 43:2652–2656CrossRef
Yamada M, Isago H, Shima K et al (2010) Deposition of TiO2 ceramic particles on cold spray process. Inter Therm Spray Confer Exp 2010. Singapore
Yang GJ, Li CJ, Han F et al (2008) Low temperature deposition and characterization of TiO2 photocatalytic film through cold spray. Appl Surf Sci 254:3979–3982CrossRef
Yang J, Kong LY, Cui XY et al (2011) Improvement in the oxidation resistance of TiAl based alloy by cold spraying Al coating and subsequent interdiffusion treatment. Adv Mater (Rus) 13:295–299
Zeng S, Zhao A, Jiang H (2015) Oxidation of conventional and nanostructured 8 wt.% yttria-stabilized zirconia coating surface coatings on γ-TiAl. Appl Surf Sci 332:362–367CrossRef
Zhang ZG (2013) Preparation and oxidation behavior of high-temperature protective coatings on TiAl alloy. Dissertation, Institute of Metal Research
Zhang DL, Cai ZH, Adam G (2004) The mechanical milling of Al/TiO2compositepowders. JOM 56:53–56CrossRef
Zhang K, Sun C, Wang FH (2006) Preparation and protection of Al diffusion coatings on matrixγ-TiAl. Acta Metall Sin 42:355–360
Zhang P, Flores-Renteria A, Wild E et al (2009) Oxidation-resistant Ti-90Al coatings with lotus effect surface morphology deposited on a gamma-TiAl alloy. Scr Mater 61:1156–1159CrossRef
Zhang H, Peng X, Wang F (2012) Fabrication of an oxidation-resistant beta-NiAl coating on gamma-TiAl. Surf Coat Technol 206:2454–2458CrossRef
Metadata
Title
High Temperature Oxidation Performance of Cold Spray Coatings
Author
Lingyan Kong
Copyright Year
2018
Book
Cold-Spray Coatings

Print ISBN: 978-3-319-67182-6

Electronic ISBN: 978-3-319-67183-3

Copyright Year: 2018

DOI
https://doi.org/10.1007/978-3-319-67183-3_14

Premium Partners

    Image Credits