Top

Journal of Materials Engineering and Performance

Published in:

15-04-2019

Impact Damage Behavior of Vinyl Ester-, Epoxy-, and Nylon 6-Based Basalt Fiber Composites

Authors: P. Russo, G. Simeoli, F. Cimino, I. Papa, M. R. Ricciardi, V. Lopresto

Published in: Journal of Materials Engineering and Performance | Issue 6/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Composite laminates reinforced by woven basalt fibers and based on different polymer matrices were prepared and mechanically characterized, in static and dynamic conditions, to compare the results and evaluate the influence of the matrix type. In this regard, a thermoplastic resin, polyamide 6 (PA6), and two thermosetting matrices, vinyl ester and epoxy grades, commonly used for high-performance applications, were considered. Indentation depth measurements carried out by a confocal microscope and ultrasound analyses performed on specimens subjected to falling dart tests at levels of impact energies lower than the perforation one permitted to evaluate the extent of plastic deformations and of subjected delaminations, respectively. These data have provided useful information about the involved damage mechanisms and highlighted interesting perspective of use for the eco-friendly thermoplastic sample.

previous article Analytical Model of High-Velocity Impact of a Deformable Projectile Against Textile-Based Composites

next article Sensitivity Analysis of Material Model Parameters to Reproduce Crushing of Composite Tubes

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

K.L. Pickering, M.G. Aruan Efendy, and T.M. Le, A Review of Recent Developments in Natural Fibre Composites and Their Mechanical Performance, Compos. Part A Appl. Sci. Manuf., 2016, 83, p 98–112CrossRef

V. Fiore, T. Scalici, G. Di Bella, and A. Valenza, A Review on Basalt Fibre and its Composites, Compos. Part B Eng., 2015, 74, p 74–94CrossRef

V. Lopresto, C. Leone, and I. De Iorio, Mechanical Characterization of Basalt Fibre Reinforced Plastic, Compos. Part B, 2011, 42, p 717–723CrossRef

G. Simeoli, D. Acierno, L. Sorrentino, S. Iannace, F. Sarasini, J. Tirillò, L. Ferrante, M. Valente, T. Valente, and P. Russo, Comparison of Low-Velocity Impact Behavior of Thermoplastic Composites Reinforced with Glass and Basalt Woven Fabrics. 16^th ECCM European Conference on Composite Materials, Seville, Spain, 22–26 June 2014

M.M. Shokrieh and M. Memar, Stress Corrosion Cracking of Basalt/Epoxy Composites Under Bending Load, Appl. Comput. Mater., 2010, 17(2), p 121–135CrossRef

R.J. Varley, W. Tian, K.H. Leong, A.Y. Leong, F. Fredo, and M. Quaresimin, The Effect of Surface Treatments on the Mechanical Properties of Basalt-Reinforced Epoxy Composites, Polym. Compos., 2013, 34(3), p 320–329CrossRef

V. Manikandan, J.T. Winowlin Jappes, S.M. Suresh Kumar, and P. Amuthakkannan, Investigation of the Effect of Surface Modifications on the Mechanical Properties of Basalt Fibre Reinforced Polymer Composites, Compos. Part B Eng., 2012, 43(2), p 812–818CrossRef

J. Song, L. Jianxun, Y. Zhang, L. Chen, Y. Zhong, and W. Yang, Basalt Fiber-Reinforced PA1012 Composites: Morphology, Mechanical Properties, Crystallization Behaviors, Structure and Water Contact Angle, J. Comput. Mater., 2015, 49(4), p 415–424CrossRef

T. Deak, T. Czigany, M. Marsalkova, and J. Militky, Manufacturing and Testing of Long Basalt Fiber Reinforced Thermoplastic Matrix Composites, Polym. Eng. Sci., 2010, 50(12), p 2448–2456CrossRef

10.

R.S. Parajapati, S. Jain, and S.C. Shit, Development of Basalt Fiber-Reinforced Thermoplastic Composites and Effect of PE-g-MA on Composites, Polym. Compos., 2017, 38(12), p 2798–2805CrossRef

11.

T. Deak, T. Czigany, P. Tamas, and Cs Nemeth, Enhancement of Interfacial Properties of Basalt Fiber Reinforced Nylon 6 Matrix Composites with Silane Coupling Agents, eXPRESS Polym. Lett., 2010, 4(10), p 590–598CrossRef

12.

L. Sang, M. Zhao, Q. Liang, and Z. Wei, Silane-Treated Basalt Fibre-Reinforced Poly(butylene succinate) Biocomposites: Interfacial Crystallization and Tensile Properties, Polymers, 2017, 9, p 351–364CrossRef

13.

Z. Ying, D. Wu, M. Zhang, and Y. Qiu, Polylactide/Basalt Fiber Composites with Tailorable Mechanical Properties: Effect of Surface Treatment of Fibers and Annealing, Compos. Struct., 2017, 176, p 1020–1027CrossRef

14.

A. Greco, A. Maffezzoli, G. Casciaro, and F. Caretto, Mechanical Properties of Basalt Fibres and Their Adhesion to Polypropylene Matrices, Compos. Part B, 2014, 67, p 233–238CrossRef

15.

R.S. Prajapati, S. Jain, and S.C. Shit, Development of Basalt Fiber-Reinforced Thermoplastic Composites and Effect of PE-g-MA on Composites, Polym. Compos., 2015, 38, p 2798–2805CrossRef

16.

Y. Zhang, C. Yu, P.K. Chu, F. Lv, C. Zhang, J. Ji, R. Zhang, and H. Wang, Mechanical and Thermal Properties of Basalt Fiber Reinforced Poly(butylene succinate) Composites, Mater. Chem. Phys., 2012, 133, p 845–849CrossRef

17.

L. Sorrentino, S. Silva de Vasconcellos, M. D’Auria, F. Sarasini, and S. Iannace, Thermooplastic Composites Based on Poly(ethylene 2,6-naphthalate) and Basalt Woven Fabrics: Static and Dynamic Mechanical Properties, Polym. Compos., 2016, http://doi.org/10.1002/pc.23449

18.

A. Akinci, Mechanical and Morphological Properties of Basalt Filled Polymer Matrix Composites, J. Mater. Sci. Eng., 2009, 35, p 29–32

19.

S. Sfarra, C. Ibarra-Castanedo, C. Santulli, A. Paoletti, D. Paoletti, F. Sarasini, A. Bendada, and X. Maldague, Falling Weight Impacted Glass and Basalt Fibre Woven Composites Inspected Using Non-destructive Techniques, Compos. Part B, 2013, 45, p 601–608CrossRef

20.

F. Shishevan, H. Akbulut, and M.A. Mohtadi-Bonab, Low Velocity Impact Behavior of Basalt Fiber-Reinforced Polymer Composites, JMEPEG, 2017, 26, p 2890–2900. http://doi.org/10.1007/s11665-017-2728-1 CrossRef

21.

R.K. Gideon, H. Hu, P. Wambua, and B. Gu, Characterizations of Basalt Unsaturated Polyester Laminates Under Static Three-Point Bending and Low-Velocity Impact Loadings, Polym. Compos., 2014, http://doi.org/10.1002/pc.22885

22.

I. Papa, V. Lopresto, G. Simeoli, A. Langella, and P. Russo, Ultrasonic Damage Investigation on Woven Jute/Poly (lactic acid) Composites Subjected to Low Velocity Impact, Compos. Part B, 2017, 115, p 282–288CrossRef

23.

V. Lopresto, G. Caprino, A. Langella, C. Leone, Penetration and indentation on basalt fibre reinforced plastic laminates under low velocity impacts, Proceedings of 15th European Conference on composite Materials, June 24–28, 2012 Venice, Italy

24.

C. Scarponi and M. Valente, An Application of a New Ultrasound Technique to Jute Composite Laminates Subjected to Low Velocity Impacts, Int. J. Mater Prod. Technol., 2006, 26(1–2), p 6–18CrossRef

25.

G. Busse, Optoacoustic Phase Angle Measurement for Probing a Metal, Appl. Phys. Lett., 1979, 35, p 759–760CrossRef

26.

G. Caprino, V. Lopresto, C. Scarponi, and G. Briotti, Influence of Material Thickness on the Response of Carbon-Fabric/Epoxy Panels to Low-Velocity Impact, Compos. Sci. Technol., 1999, 59, p 2279–2286CrossRef

27.

V. Lopresto, A. Langella, I. Papa, Delamination on GFRP Laminates Impacted at Room and Lower Temperatures: Comparison Between Epoxy and Vinylester Resins, ESAFORM 2016 Proceedings of the 19th International ESAFORM Conference on Material Forming, 27–29 April 2016, Nantes, France. Published by AIP Conf. Proc., Vol. 1769. ISBN: 978-0-7354-1427-3 Indicizzato ISI, Scopus, Wos. http://dx.doi.org/10.1063/1.4963435

28.

V. Lopresto, A. Langella, I. Papa, CFRP and GFRP Laminates in Vinylester Resin Impacted At Low Temperature, 1st International Conference on Impact Loading of Structures and Materials, ICILSM 2016, 22/26 May 2016, Turin, Italy.

29.

V. Lopresto, A. Langella, and I. Papa, Residual Strength Evaluation After Impact Tests in Extreme Conditions on CFRP Laminates, Procedia Eng., 2016, 167, p 138–142CrossRef

Title: Impact Damage Behavior of Vinyl Ester-, Epoxy-, and Nylon 6-Based Basalt Fiber Composites
Authors: P. Russo
G. Simeoli
F. Cimino
I. Papa
M. R. Ricciardi
V. Lopresto
Publication date: 15-04-2019
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 6/2019
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-019-04037-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2019

The Effect of Multistage Aging on Mechanical Properties and Microstructure of Forged 7050 Aluminum Alloys

Cooling Environment Effect on the Microstructure and Mechanical Properties of Friction Stir-Welded Joints

Effects of Transition Layer on Bending Resistance in Copper-Clad Aluminum Composite Casting

Notch Tensile Behavior of the Mg-Zn-Gd-Zr Alloy

Dynamic Frictional Characteristics of TP2 Copper Tubes during Hydroforming under Different Loading and Fluid Velocities

Tribological Properties and Self-Repairing Functionality of Ti6Al4V-Multilayer Graphene-Ag Composites

Premium Partners