Top

Metallurgist

Published in:

01-01-2014

Improving the Design of the Oxygen Lance and the Blowing Regime for BOF Steelmaking in the BOF Shop at the Azovstal Metallurgical Combine

Authors: A. V. Sushchenko, E. O. Tskitishvili, R. S. Sidorchuk, N. N. Ligus, M. P. Orlichenko

Published in: Metallurgist | Issue 9-10/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Newly designed tips for oxygen lances and new blowing regimes for BOF steelmaking have been developed, tested, and introduced in the BOF shop at the Azovstal Metallurgical Combine (part of the Metinvest Holding Company, Ltd.). The new tips and regimes improve the performance indices for steel production under different charging and operating conditions in the shop.

previous article Improving the Charging and Blast Regimes on Blast Furnaces at the Azovstal Metallurgical Combine

next article Rational Deoxidation as a Method for Controlling Nonmetallic Phase Formation in High-Carbon Steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. V. Sushchenko, A. A. Kurdyukov, I. D. Buga, et al., “Optimizing the parameters of the nozzle block of an oxygen lance in the oxygen-converter shop at the Azovstal Metallurgical Combine,” Proc. 4th Congress of Steelmakers, Chermetinformatsiya, Moscow (1997), pp. 113–114.

A. V. Sushchenko, A. A.Kurdyukov, I. D. Buga, et al., “Improving the durability of the tips of lances for 350-ton converters,” Stal, No. 5, 14–17 (1996).

O. V. Nosochenko,V. I. Ganoshenko, I. L. Buzun, et al., “Development and mastery of a technology for making steel with a sulfur content no greater than 15 ppm in the oxygen converter shop at the Azovstal Metallurgical Combine,” Metal i Lit’e Ukrainy, No. 7/8, 20–22 (2003).

E. A. Kapustin and A. V. Sushchenko, “Construction of a theory and mathematical model of oxygen-converter steelmaking,” in: Aspects of the Theory and Practice of Steelmaking [in Russian], Metallurgiya, Moscow (1991), pp. 57–73.

A. V. Sushchenko, “On optimizing the blowing regimes and equipment of oxygen converters,” Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No. 3, 21–26 (2002).

S. V. Kolpakov, R. V. Starov, V. V. Smoktii, et al., Steelmaking Technology in Modern Converter Shops [in Russian], Mashinostroenie, Moscow (1987).

A. G. Chernyatevich, Developing Energy-Saving Methods of Blowing the Converter Bath Based on High-Temperature Modeling: Auth. Abstr. Eng. Sci. Doct. Dissert.: 05.16.02, DPI, Donetsk (1990).

E. V. Protopopov, Developing a Theory and an Integrated Technology for Converter Steelmaking with Variable Cold-Charge Parameters: Auth. Abstr. Eng. Sci. Doct. Dissert.: 05.16.02, SGIU, Novokuznetsk (1999).

E. A. Chubina, Improving the Technology for Forming a Slag Crust on the Lining of a Converter and Designs of Lances for This Purpose: Auth. Abstr. Eng. Sci. Doct. Dissert.: 05.16.02, Dneprodzerzhinsk State Technical University (2009).

10.

A. V. Sushchenko, F. I. Lukhtura, A. B Kovura, et al. “Nozzles with a high resistance to abrasive wear for oxygen-converter lances,” Stal, No. 9, 20–25 (2005).

11.

R. V. Starov and V. A. Nagorskikh, Steelmaking in Converters [in Russian], Tekhknika, Kiev (1987).

12.

A. V. Sushchenko and A. S. Bezcherev, “Mathematical modeling of a flame for the secondary combustion of gases in the cavity of an oxygen converter,” Nauch. Tr. DonNTU, Metallurgiya (2007), Iss. 9, pp. 53–58.

13.

A. S. Bezcherev and A. V. Sushchenko, “Modeling the secondary combustion of carbon monoxide in an oxygen converter,” Metallurg. Gonorud. Prom., No. 8, 44–48 (2004).

14.

A. M. Bigeev, Mathematical Description and Design of Steelmaking Processes [in Russian], Metallurgiya, Moscow (1982).

Title: Improving the Design of the Oxygen Lance and the Blowing Regime for BOF Steelmaking in the BOF Shop at the Azovstal Metallurgical Combine
Authors: A. V. Sushchenko
E. O. Tskitishvili
R. S. Sidorchuk
N. N. Ligus
M. P. Orlichenko
Publication date: 01-01-2014
Publisher: Springer US
Published in: Metallurgist / Issue 9-10/2014
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-014-9806-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2014

Comparison of Weldability of High-Strength Pipe Steels Microalloyed with Niobium, Niobium and Vanadium

Operation of Blast Furnaces at the Azovstal Metallurgical Combine with a Uniform Circumferential Distribution of the Charge and the Gases

Comparative Analysis of the Durability of Solid-Forged and Bimetallic Backup Rolls on Rolling Mills

Study of the High-Temperature Reduction of Ore-Coal Extrusion Briquettes (Brex)

Developing and Using Alternative Methods of Continuous Casting to Make a Narrow Range of High-Temperature Solders

Hydrogen Emission from Steel 40KhGM at Elevated Temperature

Premium Partners