Top

Metallurgist

Published in:

01-03-2015

Improving the Drawing and Cold-Rolling of Tubes

Author: G. A. Orlov

Published in: Metallurgist | Issue 11-12/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Certain trends in the improvement of the operations that are carried out to make cold-deformed tubes are discussed and “technological niches” are identified. Mathematical modeling is performed of the operations executed in roller drawing through one and two roller dies, periodic drawing, and the nonuniform reduction of circular tubes that vary in the thickness of their wall. The modeling is done using the finite-elements method and variational methods from metal-shaping theory. The results obtained from analyzing the laws discovered during the modeling are used to develop new methods of drawing and improve the design of the equipment used on tube cold-rolling mills.

previous article Technological Aspects of the Production of Pipes Made of Laminated Metallic Materials for the Technical Facilities of the Oil, Gas, and Chemical Industries

next article Use of the Lining Method to Restore the Service Characteristics of Pump-Compressor Tubing that Has Exhausted its Original Service Life

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

R. Z. Akchurin, A. A. Bogatov, V. M. Popov, et al., Author’s Certificate No. 1003953 USSR, IPC⁵ B21C5/08, “Unit for tube drawing-burnishing,” subm. 10.17.1980, publ. 03.15.1983, Byull., No. 10.

G. A. Savin, Tube Drawing, Metallurgiya, Moscow (1993).

G. A. Orlov, A. A. Bogatov, R. Z. Akchurin, and A. A. Pupyshev, Patent No. 2188090 RF, IPC B21C1/24, “Method for the periodic drawing of tubes,” subm. 04.09.2001, publ. 08.27.2002, Byull., No. 24.

G. A. Orlov and E. N. Vagapov, “Modeling the change in the variation of the wall-thickness of tubes during rolling through undriven rollers,” Prioizvod. Prokata, No. 3, 15–19 (2011).

M. F. Stoletnyi and E. D. Klempert, Accuracy of Tubes, Metallurgiya, Moscow (1975).

G. A. Orlov and E. N. Vagapov, Patent No. 2486021 RF, IPC B21C1/24, “Method of producing tubes,” subm. 26.12.2011, publ. 27.06.2013, Byull., No. 18.

G. A. Orlov and E. N. Vagapov, Patent No. 2453387 RF, IPC B21C3/08, “Roller die for the production of round tubes,” subm. 12.29.2010, publ. 06.20.2012, Byull., No. 17.

A. A. Bogatov, G. A. Orlov, and A. A. Pupyshev, “Study of the periodic drawing of tubes by the finite-elements method,” Izv. Vyssh. Uchebn. Zaved. Tsvetn. Met., No. 3, 49–55 (2005).

G. A. Orlov, Construction of Mathematical Models and Methods of Improving the Accuracy and Deformability of Thin-Walled Tubes during Cold Rolling and Drawing: Auth. Abstr. Dissert. Doct. Techn. Sci., Ekaterinburg (2005).

10.

G. A. Orlov, V. F. Igoshin, O. I. Mizhiritskii, et al., “Alleviating the variation of wall thickness during rolling on specially shaped mandrels on KhPT and KhPTR mills,” Stal, No. 10, 59–61 (1993).

11.

O. I. Mizhiritskii, G. A. Orlov, A. M. Kuznetsov, et al., “Reducing transverse wall-thickness variation on copper and brass tubes,” Tsvetn. Met., No. 5, 57–60 (1992).

12.

G. A. Orlov, “Ways of improving the design of the equipment of tube cold-rolling mills,” Stal, No. 12, 83–85 (2004).

Title: Improving the Drawing and Cold-Rolling of Tubes
Author: G. A. Orlov
Publication date: 01-03-2015
Publisher: Springer US
Published in: Metallurgist / Issue 11-12/2015
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-015-0031-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2015

Maximizing the Use of Pulverized-Coal Fuel in the Blast-Furnace Shop at the Mariupol Metallurgical Combine

Use of Mathematical Modeling in Selecting a Heat-Treatment Regime

Fatigue Strength of Microalloyed Hot-Deformed Powder Steels

Use of the Lining Method to Restore the Service Characteristics of Pump-Compressor Tubing that Has Exhausted its Original Service Life

Optimization of the Technology Used to Make Polymetallic Superconducting Composites

Principles of Predicting Temperature and Concentration Dependences of Surface Tension for Molten Metallurgical Slags of the CaO–Al2O3–CaF2 System

Premium Partners