Top

Tribology Letters

Published in:

01-12-2021 | Original Paper

In-Depth Microstructural Analysis of Galling Deformation in Stainless Steels

Authors: T. Lesage, S. Bouvier, M. Risbet, P. E. Mazeran

Published in: Tribology Letters | Issue 4/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Galling resistance of different stainless steels was investigated using the ASTM G98 standard. Galling resistance is often only addressed via galling threshold but an increasing number of studies nowadays focus on galling severity. During these studies, three galling categories have recently been identified in stainless steel, based on surface topography evolution, SEM observation, and local chemical analyses. These three categories of galling, namely tolerant, moderate galling, and severe galling have been depicted but still poorly understood. The objective of this work is to determine the relationships between the microstructure, its evolution, and the galling response of the different materials. The authors aim to clarify these relationships and propose an explanation of the consequences of galling on the microstructure of the galled samples. A correlation between the galling severity and the subsurface plastic behaviors is proposed. In particular, the mobility of dislocations in close surface is investigated as a plausible parameter determining galling severity.

previous article Active Control of Boundary Lubrication of Ceramic Tribo-Pairs in Sodium Dodecyl Sulfate Aqueous Solutions

next article Atomic Simulations of Deformation Mechanism of 3C-SiC Polishing Process with a Rolling Abrasive

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Ocken, H.: The galling wear resistance of new iron-base hardfacing alloys: a comparison with established cobalt- and nickel-base alloys. Surf. Coat. Technol. 76, 456 (1995)CrossRef

Hummel, S.R., Helm, J.: Repeatability estimation in galling resistance testing. J. Tribol. 132, 044504–044504 (2010). https://doi.org/10.1115/1.4002504CrossRef

Hummel, S.R.: Development of a galling resistance test method with a uniform stress distribution. Tribol. Int. 41, 175–180 (2008). https://doi.org/10.1016/j.triboint.2007.07.009CrossRef

Voss, B.M., Pereira, M.P., Rolfe, B.F., Doolan, M.C.: A new methodology for measuring galling wear severity in high strength steels. Wear 390–391, 334–345 (2017). https://doi.org/10.1016/j.wear.2017.09.002CrossRef

Rogers, S.R., Bowden, D., Unnikrishnan, R., Scenini, F., Preuss, M., Stewart, D., Dini, D., Dye, D.: The interaction of galling and oxidation in 316L stainless steel. Wear 450–451, 203234 (2020). https://doi.org/10.1016/j.wear.2020.203234CrossRef

Lesage, T., Bouvier, S., Oudriss, A., Chen, Y., Risbet, M., Mazeran, P.-E.: Galling categories investigations in stainless steels. Wear 460–461, 203413 (2020). https://doi.org/10.1016/j.wear.2020.203413CrossRef

Karlsson, P., Gåård, A., Krakhmalev, P., Bergström, J.: Galling resistance and wear mechanisms for cold-work tool steels in lubricated sliding against high strength stainless steel sheets. Wear 286–287, 92–97 (2012). https://doi.org/10.1016/j.wear.2011.04.002CrossRef

Schedin, E.: Galling mechanisms in sheet forming operations. Wear 179, 123–128 (1994). https://doi.org/10.1016/0043-1648(94)90229-1CrossRef

Shanbhag, V.V., Rolfe, B.F., Griffin, J.M., Arunachalam, N., Pereira, M.P.: Understanding galling wear initiation and progression using force and acoustic emissions sensors. Wear 436–437, 202991 (2019). https://doi.org/10.1016/j.wear.2019.202991CrossRef

10.

Skåre, T., Thilderkvist, P., Ståhl, J.-E.: Monitoring of friction processes by the means of acoustic emission measurements—deep drawing of sheet metal. J. Mater. Process. Technol. 80–81, 263–272 (1998). https://doi.org/10.1016/S0924-0136(98)00130-7CrossRef

11.

Shanbhag, V.V., Rolfe, B.F., Arunachalam, N., Pereira, M.P.: Investigating galling wear behaviour in sheet metal stamping using acoustic emissions. Wear 414–415, 31–42 (2018). https://doi.org/10.1016/j.wear.2018.07.003CrossRef

12.

Saidoun, A., Herve, C., Chen, Y.M., Lesage, T., Bouvier, S.: Galling detection by acoustic emission (AE) according to ASTM G98 (oral presentation). In: EWGAE (2018).

13.

Ko, D.-C., Kim, S.-G., Kim, B.-M.: Influence of microstructure on galling resistance of cold-work tool steels with different chemical compositions when sliding against ultra-high-strength steel sheets under dry condition. Wear 338–339, 362–371 (2015). https://doi.org/10.1016/j.wear.2015.07.014CrossRef

14.

Smith, R., Doran, M., Gandy, D., Babu, S., Wu, L., Ramirez, A.J., Anderson, P.M.: Development of a gall-resistant stainless-steel hardfacing alloy. Mater. Des. (2018). https://doi.org/10.1016/j.matdes.2018.01.020CrossRef

15.

Hsu, K.-L., Ahn, T.M., Rigney, D.A.: Friction, wear and microstructure of unlubricated austenitic stainless steels. Wear 60, 13–37 (1980). https://doi.org/10.1016/0043-1648(80)90247-1CrossRef

16.

Hubert, C., Marteau, J., Deltombe, R., Chen, Y.M., Bigerelle, M.: Roughness characterization of the galling of metals. Surf. Topogr. Metrol. Prop. 2, 034002 (2014). https://doi.org/10.1088/2051-672X/2/3/034002CrossRef

17.

Pujante, J., Pelcastre, L., Vilaseca, M., Casellas, D., Prakash, B.: Investigations into wear and galling mechanism of aluminium alloy-tool steel tribopair at different temperatures. Wear 308, 193–198 (2013). https://doi.org/10.1016/j.wear.2013.06.015CrossRef

18.

Wang, Z., Yang, M., Yoshikawa, Y.: A prediction method of galling position in square cup drawing. Procedia Eng. 81, 1830–1835 (2014). https://doi.org/10.1016/j.proeng.2014.10.241CrossRef

19.

Vikström, J.: Galling resistance of hardfacing alloys replacing Stellite. Wear 179, 143–146 (1994). https://doi.org/10.1016/0043-1648(94)90232-1CrossRef

20.

Heikkilä, I.: Influence of tool steel microstructure on galling resistance against stainless steel. In: Dalmaz, G., Lubrecht, A.A., Dowson, D., Priest, M. (eds.) Tribology Series, pp. 641–649. Elsevier, Amsterdam (2003)

21.

Karlsson, P., Krakhmalev, P., Gåård, A., Bergström, J.: Influence of work material proof stress and tool steel microstructure on galling initiation and critical contact pressure. Tribol. Int. 60, 104–110 (2013). https://doi.org/10.1016/j.triboint.2012.10.023CrossRef

22.

Fontalvo, G.A., Humer, R., Mitterer, C., Sammt, K., Schemmel, I.: Microstructural aspects determining the adhesive wear of tool steels. Wear 260, 1028–1034 (2006). https://doi.org/10.1016/j.wear.2005.07.001CrossRef

23.

Gåård, A.: Influence of tool microstructure on galling resistance. Tribol. Int. 57, 251–256 (2013). https://doi.org/10.1016/j.triboint.2012.08.022CrossRef

24.

Nohara, K., Ono, Y., Ohashi, N.: Composition and grain size dependencies of strain-induced martensitic transformation in metastable austenitic stainless steels. Tetsu-To-Hagane/J. Iron Steel Inst. Jpn. 100, R27–R29 (2014)CrossRef

25.

Bhansali, K.J., Miller, A.E.: The role of stacking fault energy on galling and wear behavior. Wear 75, 241–252 (1982). https://doi.org/10.1016/0043-1648(82)90151-XCrossRef

26.

Allain, S., Chateau, J.-P., Dahmoun, D., Bouaziz, O.: Modeling of mechanical twinning in a high manganese content austenitic steel. Mater. Sci. Eng. A 387–389, 272–276 (2004). https://doi.org/10.1016/j.msea.2004.05.038CrossRef

27.

Meric de Bellefon, G., van Duysen, J.C., Sridharan, K.: Composition-dependence of stacking fault energy in austenitic stainless steels through linear regression with random intercepts. J. Nucl. Mater. 492, 227–230 (2017). https://doi.org/10.1016/j.jnucmat.2017.05.037CrossRef

28.

Poole, B., Barzdajn, B., Dini, D., Stewart, D., Dunne, F.P.E.: The roles of adhesion, internal heat generation and elevated temperatures in normally loaded, sliding rough surfaces. Int. J. Solids Struct. 185–186, 14–28 (2020). https://doi.org/10.1016/j.ijsolstr.2019.09.012CrossRef

29.

Barzdajn, B., Paxton, A.T., Stewart, D., Dunne, F.P.E.: A crystal plasticity assessment of normally-loaded sliding contact in rough surfaces and galling. J. Mech. Phys. Solids (2018). https://doi.org/10.1016/j.jmps.2018.08.004CrossRef

30.

Persson, D.H.E., Jacobson, S., Hogmark, S.: Effect of temperature on friction and galling of laser processed Norem 02 and Stellite 21. Wear 255, 498–503 (2003). https://doi.org/10.1016/S0043-1648(03)00122-4CrossRef

31.

Lesage, T.: Galling of stainless steels: influence of material nature, microstructure and thermochemical heat treatments, PhD dissertation (in French). Université de Technologie de Compiègne, Compiègne (2019)

32.

Schuh, C.A., Kumar, M., King, W.E.: Universal features of grain boundary networks in FCC materials. J. Mater. Sci. 40, 847–852 (2005). https://doi.org/10.1007/s10853-005-6500-9CrossRef

33.

Lu, X., Zhang, X., Shi, M., Roters, F., Kang, G., Raabe, D.: Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper. Int. J. Plast 113, 52–73 (2019). https://doi.org/10.1016/j.ijplas.2018.09.007CrossRef

34.

Jamaati, R., Toroghinejad, M.R., Amirkhanlou, S., Edris, H.: Production of nanograin microstructure in steel nanocomposite. Mater. Sci. Eng. A 638, 143–151 (2015). https://doi.org/10.1016/j.msea.2015.04.014CrossRef

35.

Watanabe, T.: Approach to grain boundary design for strong and ductile polycrystals. Res. Mech. 11, 47–84 (1984)

36.

Zhang, M.-X., Kelly, P.M.: Accurate orientation relationship between ferrite and austenite in low carbon martensite and granular bainite. Scr. Mater. 47, 749–755 (2002). https://doi.org/10.1016/S1359-6462(02)00196-3CrossRef

37.

Venables, J.A.: The nucleation and propagation of deformation twins. J. Phys. Chem. Solids 25, 693–700 (1964). https://doi.org/10.1016/0022-3697(64)90178-7CrossRef

38.

Boas, M., Rosen, A.: Effect of load on the adhesive wear of steels. Wear 44, 213–222 (1977). https://doi.org/10.1016/0043-1648(77)90140-5CrossRef

39.

Zhao, G., Fan, J., Zhang, H., Zhang, Q., Yang, J., Dong, H., Xu, B.: Exceptional mechanical properties of ultra-fine grain AZ31 alloy by the combined processing of ECAP, rolling and EPT. Mater. Sci. Eng. A 731, 54–60 (2018). https://doi.org/10.1016/j.msea.2018.05.112CrossRef

40.

Anthony, K.C.: Wear-resistant cobalt-free alloys. J. Mech. Eng. Technol. 35, 52–60 (1983)

41.

Samih, Y.: Thermomechanical surface treatments of austenitic stainless steels and their effects on subsequent nitriding during “Duplex” treatments, PhD dissertation, Université de Lorraine (2014). http://docnum.univ-lorraine.fr/public/DDOC_T_2014_0100_SAMIH.pdf.

Title: In-Depth Microstructural Analysis of Galling Deformation in Stainless Steels
Authors: T. Lesage
S. Bouvier
M. Risbet
P. E. Mazeran
Publication date: 01-12-2021
Publisher: Springer US
Published in: Tribology Letters / Issue 4/2021
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-021-01520-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2021

Controlling Friction and Wear with Anisotropic Microstructures in MoN-Coated Surfaces

A New Method for Measuring Stress Inside Movable Element in Contact

Lubrication–Contact Interface Conditions and Novel Mixed/Boundary Lubrication Modeling Methodology

Achieving Macroscale Liquid Superlubricity Using Lubricant Mixtures of Glycerol and Propanediol

A Note by K. L. Johnson on the History of the JKR Theory

Tribological Performance and Mechanism of MoN/VN Multilayer Films with Different Modulation Periods at Different Temperature

Premium Partners