Top

Experimental Mechanics

Published in:

07-02-2020 | Research paper

Incremental Hole Drilling Residual Stress Measurement in Thin Aluminum Alloy Plates Subjected to Laser Shock Peening

Authors: J. P. Nobre, C. Polese, S. N. van Staden

Published in: Experimental Mechanics | Issue 4/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The American standard ASTM E837 presents a standard procedure to determine residual stresses in isotropic materials using the incremental hole drilling technique (IHD). The standard, however, presents limitations regarding its applicability, such as those related with the thin thickness of the samples. According to this standard, in depth non uniform residual stresses can only be determined, roughly, in plates where the thickness is greater than the mean diameter of the strain gage rosette used. This limitation excludes important experimental cases and, therefore, deserves to be investigated. In this work this limitation is numerically and experimentally investigated in detail, considering the case of residual stresses induced by laser shock peening (LSP) in aluminum alloy 7075-T651 plates. The obtained results using the incremental hole drilling technique (IHD), based on the integral method, are benchmarked against the results of several diffraction techniques, used as reference, and a procedure to correct the experimentally determined strain-depth relaxation curves, to accurately still apply the ASTM E837 standard procedure is discussed and validated.

previous article Experimental Investigation of the Inelastic Response of Pig and Rat Skin Under Uniaxial Cyclic Mechanical Loading

next article Impulse Loading of Plates using a Diverging Shock Tube

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

ASTM E837-13a (2013) Standard test method for determining residual stresses by the hole-drilling strain-gage method, ASTM International, West Conshohocken, PA, www.astm.org

Schajer GS, Whitehead PS (2018) Hole-drilling method for measuring residual stresses. Synthesis SEM Lectures on Experimental Mechanics 1(1):1–186. https://doi.org/10.2200/S00818ED1V01Y201712SEM001 CrossRef

Frija M, Hassine T, Fathallah R, Bouraoui C, Dogui A (2006) Finite element modelling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity. Mater Sci Eng A 426(1):173–180. https://doi.org/10.1016/j.msea.2006.03.097 CrossRef

Hammond DW, Meguid SA (1990) Crack propagation in the presence of shot peening residual stresses. Eng Fract Mech 37(2):373–387. https://doi.org/10.1016/0013-7944(90)90048-L CrossRef

Furfari D (2014) Laser shock peening to repair, design and manufacture current and future aircraft structures by residual stress engineering. Adv Mater Res 891-892:992–1000. https://doi.org/10.4028/www.scientific.net/AMR.891-892.992 CrossRef

García-Granada AA, Gomez-Gras G, Jerez-Mesa R, Travieso-Rodriguez JA, Reyes G (2017) Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4. Mater Manuf Process 32(11):1279–1289. https://doi.org/10.1080/10426914.2017.1317351 CrossRef

Troiani E, Taddia S, Meneghin I, Molinari G (2014) Fatigue crack growth in laser shock peened thin metallic panels. Adv Mater Res 996:775–781. https://doi.org/10.4028/www.scientific.net/AMR.996.775 CrossRef

Ocaña JL, Correa C, García-Beltrán A, Porro JA, Díaz M, Ruiz-de-Lara L, Peral D (2015) Laser shock processing of thin Al2024-T351 plates for induction of through-thickness compressive residual stresses fields. J Mater Process Technol 223:8–15. https://doi.org/10.1016/j.jmatprotec.2015.03.030 CrossRef

Petan L, Ocaña JL, Grum J (2016) Effects of laser shock peening on the surface integrity of 18% Ni Maraging steel. Strojniški vestnik - Journal of Mechanical Engineering 62(5):291–298. https://doi.org/10.5545/sv-jme.2015.3305 CrossRef

10.

Prime MB (2000) Cross-sectional mapping of residual stresses by measuring the surface contour after a cut. J Eng Mater Technol 123(2):162–168. https://doi.org/10.1115/1.1345526 CrossRef

11.

Kartal ME (2013) Analytical solutions for determining residual stresses in two-dimensional domains using the contour method. Proceedings of the Royal Society a: mathematical, physical and engineering sciences 469(2159):20130367. https://doi.org/10.1098/rspa.2013.0367 MathSciNetCrossRefMATH

12.

Kartal ME, Liljedahl CDM, Gungor S, Edwards L, Fitzpatrick ME (2008) Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method. Acta Mater 56(16):4417–4428. https://doi.org/10.1016/j.actamat.2008.05.007 CrossRef

13.

Staden SNV, Polese C, Glaser D, Nobre JP, Venter AM, Marais D, Okasinski J, Park J-S (2018) Measurement of Residual Stresses in Different Thicknesses of Laser Shock Peened Aluminium Alloy Samples. Materials Research Proceedings 4:117–122. https://doi.org/10.21741/9781945291678-18 CrossRef

14.

Toparli MB (2012) Analysis of residual stress fields in aerospace materials after laser peening. PhD Dissertation, The Open University, Milton Keynes, UK

15.

Toparli MB, Fitzpatrick ME (2016) Development and application of the contour method to determine the residual stresses in thin laser-peened Aluminium alloy plates. Exp Mech 56(2):323–330. https://doi.org/10.1007/s11340-015-0100-7 CrossRef

16.

Held E, Schuster S, Gibmeier J (2014) Incremental hole-drilling method Vs. thin components: a simple correction approach. Adv Mater Res 996:283–288. https://doi.org/10.4028/www.scientific.net/AMR.996.283 CrossRef

17.

Sobolevski EG (2007) Residual stress analysis of components with real geometries using the incremental hole-drilling technique and a differential evaluation method. PhD dissert., Kassel University, Kassel, Germany

18.

Gore B, Nobre JP (2016) Effects of numerical methods on residual stress evaluation by the incremental hole-drilling technique using the integral method. Materials research proceedings 2:587–592. https://doi.org/10.21741/9781945291173-99 CrossRef

19.

Schajer GS (1988) Measurement of non-uniform residual stress using the hole-drilling method. Part II-practical application of the integral method. Journal of Eng mat and tech (ASME) 110(4):344–349. https://doi.org/10.1115/1.3226060 CrossRef

20.

Magnier A, Zinn W, Niendorf T, Scholtes B (2019) Residual stress analysis on thin metal sheets using the incremental hole drilling method – fundamentals and validation. Exp Tech 43(1):65–79. https://doi.org/10.1007/s40799-018-0266-x CrossRef

21.

Schuster S, Steinzig M, Gibmeier J (2017) Incremental hole Drilling for Residual Stress Analysis of thin walled components with regard to plasticity effects. Exp Mech 57(9):1457–1467. https://doi.org/10.1007/s11340-017-0318-7 CrossRef

22.

Nobre JP, Kornmeier M, Scholtes B (2018) Plasticity effects in the hole-drilling residual stress measurement in peened surfaces. Exp Mech 58(2):369–380. https://doi.org/10.1007/s11340-017-0352-5 CrossRef

23.

Schajer GS, Whitehead PS (2018) Hole-drilling method for measuring residual stresses, vol 1. Synthesis SEM Lectures on Experimental Mechanics, vol 1. Morgan & Claypool Publishers. doi: https://doi.org/10.2200/S00818ED1V01Y201712SEM001

24.

Lorentzen T (2003) Anisotropy of lattice strain response. In: Fitzpatrick M, Lodini A (eds) Analysis of residual stress by diffraction using neutron and synchrotron radiation. CRC Press, London

25.

ASM Handbook (1990), vol 2. Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. ASM International

26.

Macherauch E, Müller P (1961) Das sin2y-Verfahren der Röntgenographischen Spannungsmessung. Zeitschrift für Angewandte Physik 13:305–312

27.

ANSYS I (2013) ANSYS Mechanical APDL Theory Reference. Release 15.0 edn. SAS IP, Inc., Canonsburg, USA

28.

Schajer GS (1981) Application of finite element calculations to residual stress measurements. Journal of Eng mat and tech (ASME) 103(2):157–163. https://doi.org/10.1115/1.3224988 CrossRef

29.

Kornmeier M (1999) Analyse von Abschreck- und Verformungseigenspannungen mittels Bohrloch- und Röntgenverfahren. PhD Dissertation, Universität Gh Kassel, Kassel, Germany

30.

Schajer GS (1993) Use of displacement data to calculate strain gauge response in non-uniform strain fields. Strain 29(1):9–13. https://doi.org/10.1111/j.1475-1305.1993.tb00820.x CrossRef

31.

Correa C, Peral D, Porro JA, Díaz M, Ruiz de Lara L, García-Beltrán A, Ocaña JL (2015) Random-type scanning patterns in laser shock peening without absorbing coating in 2024-T351 Al alloy: a solution to reduce residual stress anisotropy. Opt Laser Technol 73:179–187. https://doi.org/10.1016/j.optlastec.2015.04.027 CrossRef

32.

ANSYS I (2013) ANSYS advanced analysis techniques. SAS IP, Inc., Canonsburg

Title: Incremental Hole Drilling Residual Stress Measurement in Thin Aluminum Alloy Plates Subjected to Laser Shock Peening
Authors: J. P. Nobre
C. Polese
S. N. van Staden
Publication date: 07-02-2020
Publisher: Springer US
Published in: Experimental Mechanics / Issue 4/2020
Print ISSN: 0014-4851
Electronic ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-020-00586-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2020

Friction Correction of Austenite Flow Stress Curves Determined under Axisymmetric Compression Conditions

On the Optimal Pattern for Displacement Field Measurement: Random Speckle and DIC, or Checkerboard and LSA?

Impulse Loading of Plates using a Diverging Shock Tube

Correction to: Two-Dimensional Culture Systems to Enable Mechanics-Based Assays for Stem Cell-Derived Cardiomyocytes

Non-destructive Surface Residual Stress Profiling by Multireflection Grazing Incidence X-Ray Diffraction: a 7050 Al Alloy Study

Experimental Investigation of the Inelastic Response of Pig and Rat Skin Under Uniaxial Cyclic Mechanical Loading

Premium Partners