Top

Metallurgist

Published in:

03-07-2021

Influence of Chemical Composition and Microstructure Parameters of Tubing Steels on their Corrosion Resistance

Authors: A. V. Amezhnov, I. G. Rodionova, A. E. Antoshenkov, N. A. Stukalova, Yu. S. Gladchenkova

Published in: Metallurgist | Issue 3-4/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Comprehensive studies of tubing made of 36CrMn2Si and 38CrMn steels have shown that 38CrMn steel has better corrosion resistance compared to 36CrMn2Si steel. А reduction in steel silicon content leads to an increase in corrosion resistance. Increased contamination with complex nonmetallic inclusions of unfavorable composition has an unfavorable effect on corrosion resistance, as well as presence of chemical inhomogeneity in the form of banding.

previous article Formation of Structure and Properties of Low-Carbon Pipe Steel with Ultralow Manganese Content during Thermomechanical Treatment

next article Analysis of the Specific Features of Wear of the Working Rolls of the Finishing Group of Stands Under Conditions of the 1950 Mill at the Casting-Rolling Complex of the “VMZ” JSC

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. N. Markin and R. É. Nizamov, Oil Industry Equipment CO₂-Corrosion [in Russian], OAO VNIIOÉNG, Moscow 92003).

A. S. Topol’nikov, “Prediction of carbon dioxide corrosion of underground oil recovery borehole equipment,” Izh. Praktika, No. 8, 94 (2011).

I. G. Abdullin and A. G. Gareev, “Corrosion-fatigue durability of pipe steel in carbonate-bicarbonate medium,” Materials Science, 29, No. 5, 539–541 (1994).CrossRef

G. A. Vorob’eva, Material Corrosion Resistance [in Russian], Khimiya, Moscow (1975).

M. Javidi, M. Saeedikhani, and R. Omidi, “Failure analysis of a gas well tubing due to corrosion: a case study,” J. of Failure Analysis and Prevention, 12, 550–557 (2012).CrossRef

S. D. Zhu, J. F. Wei, Z. Q. Bai, G. S. Zhou, J. Miao, and R. Cai, “Failure analysis of P110 tubing string in the ultra-deep oil well,” Eng. Failure Analysis, 18, No. 3, 950–962 (2011.CrossRef

I. G. Rodionova, A. V. Amezhnov, D. V. Kudashov, V. V. Naumenko, D. L. D’yakonov, N. A. Stukalova, and N. A. Arutyunyan, “Effect of heat treatment on pipe finishing for corrosion resistance of microalloyed steel hot-rolled product,” Metallurg, No. 4, 46–55 (2020).

A. V. Amezhnov and I. G. Rodionova, “Effect of non-metallic inclusion chemical and phase composition on corrosion resistance of carbon and low alloy steels in water media typical for oilfield pipeline operating conditions,” Metallurgist, 63, 717–726 (2019); https://doi.org/10.1007/s11015-019-00881-0.CrossRef

A. V. Amezhnov, I. G. Rodionova, D. L. D’yakonov, N. G. Shaposhnikov, M. E. Marzoeva, A. I. Batsalev, and T. E. Shatskii, “Effect of chemical composition and microstructure parameters on carbon and low-alloy steel corrosion resistance under oil industry pipeline operation conditions,” Metallurgist, 62, No. 9–10, 1030–1038 (2019); https://doi.org/10.1007/s11015-019-00750-w.CrossRef

10.

I. G. Rodionova, M. V. Feoktistova, O. N. Baklanova, A. V. Amezhnov, and D. L. D’yakonov, “Effect of chemical composition and microstructure parameters on corrosion resistance of carbon and low-alloy steels,” Metallurg, No. 9, 57–62 (2017).

11.

M. V. Shvetsov, G. B. Bikbov, and I. F. Kalachev, “Advantage of powder coatings for protecting tubing,” Ékspozittsia Neft’ Gaz, No. 3, 37–39 (2015).

12.

I. G. Rodionova, O. N. Baklanova, A. V. Amezhnov, A. V. Knyazev, A. I. Zaitsev, and M. V. Feoktistova, “Effect of nonmetallic inclusiuons of corrosion resistance of carbon and low-alloy steels for oil industry pipelines,” Stal’, No. 10, 41–48 (2017).

13.

A. V. Ioffe, M. A. Vyboishchik, S. A. Knyaz’kin, and A. O. Zyryanov, “Corrosion-mechanical failure of tubing during operation in media with increased carbon dioxide gas content,” in: XVIII Internat. Conf “Physics of Material Strength and Ductility”, Samara (2012), p. 128–129.

14.

A. V. Ioffe, M. A. Vyboishchik, S. A. Knyaz’kin, and A. O. Zyryanov, “Development of steel for preparing tubing with good operating capacity in corrosion-active media,” in: XVIII Internat. Conf “Physics of Material Strength and Ductility”, Samara (2012).

15.

A. V. Ioffe, T. V. Tetyueva, M. A. Vyboishchik, S. A. Knyazev, E. A. Trifonova, and A. O. Zyr’yanov, “Effect of heat treatment on mechanical and corrosion properties of steel 15Kh5M,” in: 53 Internat. Sci. Conf. “Important Strength Problems,” Part 1, Vitebsk (2012).

16.

T. V. Tetyueva, A. V. Ioffe, M. A. Vyboishchik, et al., “Effect of modification microalloying and heat treatment on corrosion resistance and mechanical properties of steel 15Kh5M,” Metalloved. Term. Obrab. Metallov, No. 10, 15–22 (2012).

17.

I. Ya. Sokolov, E. A. Ul’yanin, É. G. Fel’dgander, et al., Structure and Corrosion of Metals and Alloys: Atlas ref. ed., [in Russian], Metallurgiya, Moscow (1989).

18.

G. A. Filippov, I. G. Rodionova, O. N. baklanova, et al., “Improvement of the corrosion resistance of carbon and low-alloy steels for automobile building,” in: Corrosion-Active Nonmetallic Inclusions in carbon Steels [in Russian], Metallurgizdat, Moscow (2005).

19.

I. G. Rodionova, A. I. Zaitsev, O. N. Baklanova, et al., Contemporary Approaches to Improving the Corrosion Resistance and Operating Reliability of Steels for Oil Industry Pipelines [in Russian], Metallurgizdat, Moscow (2012).

20.

A. A. Kazakov, O. V. Pakhomova, and E. I. Kazakova, “Study of the cast structure of industrial ferrite-pearlite steel slab,” Chernye Metally, No. 11, 9–15 (2012).

21.

A. V. Ioffe, T. V. Tetyueva, and T. V. Denisova, “Effect of modification with rare earth elements on mechanical and corrosion properties of low-alloy steels,” Vektor Nauki TGU, No. 14, 41–46 (2010).

22.

A. V. Amezhnov and I. G. Rodionova, “Effect of chemical and phase composition of nonmetallic inclusions on corrosion resistance of carbon and low-alloy steels in aqueous media typical for oil industry pipeline operating conditions,” Metallurg, No. 7, 45–52 (2019).

23.

A. V. Amezhnov, I. G. Rodionova, A. I. Zaitsev, et al., “Effect of chemical and phase composition of nonmetallic inclusions on corrosion resistance of carbon and low-alloy steels in aqueous media typical for oil industry pipeline operating conditions,” Probl. Chern. Meta. Materialoved., No. 3, 81–90 (2018).

24.

A. I. Zaitsev, I. G. Rodionova, A. V. Amezhnov, et al., RF Patent 2681588, Steel with Improved Corrosion Resistance and Electric Welded Pipes Made from It, Claim 05.11.2018; Publ. 03.11.2019 Bull. No. 8.

25.

A. V. Amezhnov, I. G. Rodionova, and B. M. Mogutnov, “Establishment of optimum production regimes for extra-furnace processing of low-alloy steels in order to ensure their good corrosion resistance in aqueous media through formation of favorable nonmetallic inclusions,” Refractories and Industrial Ceramics, No. 60, 521–526 (2020); https://doi.org/10.1007/s11148-020-00397-0.

Title: Influence of Chemical Composition and Microstructure Parameters of Tubing Steels on their Corrosion Resistance
Authors: A. V. Amezhnov
I. G. Rodionova
A. E. Antoshenkov
N. A. Stukalova
Yu. S. Gladchenkova
Publication date: 03-07-2021
Publisher: Springer US
Published in: Metallurgist / Issue 3-4/2021
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-021-01157-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2021

Correction to: Investigation of the Process of Synthesizing Nanosized Nickel Powders by Hydrogen Reduction under Nonisothermal Conditions

Methodology for Development and Testing of Electromagnetic Stirring Systems in Billet and Bloom CCMs

Improvement of the Devices for Filling the Crystallizers of Continuous Casting Machines with Liquid Metal

Analysis of the Specific Features of Wear of the Working Rolls of the Finishing Group of Stands Under Conditions of the 1950 Mill at the Casting-Rolling Complex of the “VMZ” JSC

Correction to: Recycling of Cable Products

Application of the Gleeble 3800 System in Developing Hot Pipe Extrusion and Pipe End Upsetting Technologies

Premium Partners