Top

European Journal of Wood and Wood Products

Published in:

01-03-2013 | Originals Originalarbeiten

Influence of geometric and mechanical parameters on stress states caused by threaded rods glued in wood

Authors: Emilio Martín, Javier Estévez, Dolores Otero

Published in: European Journal of Wood and Wood Products | Issue 2/2013

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In the construction and rehabilitation of wooden structures, timber connections are often made using glued rods. To guarantee that these connections provide adequate resistance, it is necessary to analyse the characteristics of the connections that affect their load capacity and ductility. To address this issue, the mixed strategy of developing a broad experimental program was adopted while simultaneously performing numerical analysis of models. In this paper, the finite element method is used to study the impact of several design parameters on stress transfer between materials. This approach has facilitated design strategies that improve the effectiveness of these connections.

previous article An investigation of thermochemical changes in Canadian hardwood species during wood welding

next article Novel adhesive system based on 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) and hyperbranched polyglycerols

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Aicher S, Hofflin L, Wolf M (1998) Influence of specimen geometry on stress distributions in pull-out tests of glued-in steel rods in wood. Otto Graf J 9:205–217

Bainbridge R, Mettem C, Harvey K, Ansell M (2002) Bonded-in rod connections for timber structures. Development of design methods and test observations. Int J Adhes Adhes 22:47–59CrossRef

Broughton JG, Hutchinson AR (2001) Pull-out behaviour of steel rods bonded into timber. Mater Struct 34(2):100–109CrossRef

Buchanan AH, Deng XJ (1996) Strength of epoxied steel rods in glulam timber. In: Proceeding of the International Wood Engineering Conference, New Orleans, pp 488–495

EN 338 (2009) Structural timber. Strength classes. CEN European Committee for Standardization

Estévez J, Otero D, Martín E, Vázquez JA (2012) New anchoring system with adhesive bulbs for steel rod joints in wood. Constr Build Mater 30:583–589CrossRef

Guitard D (1987) Mechanics of wood and composite materials (in French). Cepadues Edition, Toulouse

Gustafsson PJ, Serrano E, Aicher S, Johansson CJ (2001) A strength design equation for glued-in rods. In: Proceeding of the International RILEM Symposium, Stuttgart, Germany

Johansson CJ, Serrano E, Gustafsson PJ, Enquist B (1995) Axial strength of glued-in volts. Calculation model based on non-linear fracture mechanics. A preliminary study. In: International Council for Building Research Studies and Documentation, Working Commission W18—Timber Structures. Meeting 28, Copenhagen, Denmark

Kurian A (2000) Analytical modeling of glued laminated girder bridges using Ansys. In: 2000 Transportation Scholars Conference, Ames, pp 54–64

Martín E, Estévez J, Otero D, Muñiz S (2006) Timber specimens parametrized design for numerical analysis. In: Proceeding of the International Conference on high performance structures and materials III, Ostende, pp 571–580

Martín E, Estévez J, Otero D, Vázquez JA (2010a) Generation of numerical analysis models for the optimization of anchorage solutions with threaded bars glued in timber. In: Proceeding of the World Conference on Timber Engineering (WCTE 2010), Riva del Garda, Italy

Martín E, Estévez J, Otero D, Vázquez JA (2010b) Numerical analysis of metal joints glued in timber pieces. In: Proceeding of the First International Conference on Structures and Architecture (ICSA 2010), Guimaraes, Portugal

Otero D, Estévez J, Martín E (2008) Glued joints in hardwood timber. Int J Adhes Adhes 28:457–463. doi:10.1016/j.ijadhadh.2008.04.008 CrossRef

Otero D, Estévez J, Martín E (2009) Influence of the geometric and material characteristics on the strength of glued joints made in chestnut timber. Mater Des 30:1325–1332. doi:10.1016/j.matdes.2008.06.041 CrossRef

Otero D, Estévez J, Martín E (2010a) Experimental analysis of bonding in steel bars glued into chestnut and tali timber (in Spanish). Materiales de Construcción 60((297)):111–125CrossRef

Otero D, Estévez J, Martín E (2010b) Influence of timber density on the axial strength of joints made with glued-in steel rods: an experimental approach. Int J of Adhes Adhes 30:380–385CrossRef

Otero D, Estévez J, Martín E (2010c) Model for predicting the axial strength of joints made with glued-in rods in sawn timber. Constr Build Mater 24:1773–1778CrossRef

Otero D, Estévez J, Martín E, Vázquez JA (2010c) Failure modes in double-side pull-out test of threaded steel rods glued in hardwood. In: Proceeding of the World Conference on Timber Engineering (WCTE 2010), Riva del Garda, Italy

Riberholt H (1986) Glued bolts in glulam. Department of Structural Engineering, University of Denmark, Denmark (Serie R No. 210)

Rossignon A, Espion B (2008) Experimental assessment of the pull-out strength of single rods bonded in glulam parallel to the grain. Holz Roh Werkst 66:419–432CrossRef

Senno M, Piazza M, Tomasi R (2004) Axial glued-in steel timber joints. Experimental and numerical analysis. Holz Roh Werkst 62:137–146CrossRef

Serrano E (2001a) Glued-in rods for timber structures. A 3D model and finite element parameter studies. Int J Adhes Adhes 21:115–127CrossRef

Serrano E (2001b) Glued-in rods for timber structures. An experimental study of softening behaviour. Mater Struct 34(4):228–234CrossRef

Steiger R, Gehri E, Widmann R (2006) Pull-out strength of axially loaded steel rods bonded in glulam parallel to the grain. Mater Struct 40(1):69–78CrossRef

Volkersen O (1938) Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten. Luftfahrtforschung 15:41–47

Title: Influence of geometric and mechanical parameters on stress states caused by threaded rods glued in wood
Authors: Emilio Martín
Javier Estévez
Dolores Otero
Publication date: 01-03-2013
Publisher: Springer-Verlag
Published in: European Journal of Wood and Wood Products / Issue 2/2013
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-013-0678-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 2/2013

Long term hygroscopic characteristics of polypropylene based hybrid composites with and without organo-modified clay

Heartwood of Cupressus lusitanica, C. macrocarpa, Leyland and Ovens cypress and prediction of its durability using near-infrared spectroscopy

Novel adhesive system based on 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) and hyperbranched polyglycerols

Mimosa tannin resins for impregnated paper overlays

Wet storage for discolouration protection during roundwood storage of three Swedish hardwoods

Water retention of wood particles – characterization of polarity and particle size