Skip to main content
Top

2017 | OriginalPaper | Chapter

Influence of Oxygen Partial Pressure on Hydroxyapatite Coating of Additive Manufactured Component by Pulsed Laser Deposition

Authors : K. Hariharan, G. Arumaikkannu

Published in: Advances in 3D Printing & Additive Manufacturing Technologies

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Additive manufactured polyamide substrate has a wide range of application in the medical field due to its good mechanical property and biological behaviour. The biocompatibility of this polyamide is further enhanced by coating Hydroxyapatite (HA) over the surface, Pulsed Laser Deposition (PLD) has become widely used technique to deposit HA, because the film obtained by this method will have better crystalline and required surface roughness which facilitates a better osseointegration. This work aims to deposit HA over polyamide substrate using PLD with different oxygen partial pressures of 2 × 10−4, 2 × 10−3 and 2 × 10−2 Torr. The characterization of coating was performed by Scanning Electron Microscope with Energy Dispersive X-ray spectroscopy (SEM-EDX), Atomic Force Microscope (AFM) and X-Ray Diffraction (XRD). These results suggest that the surface microstructure, crystallinity and surface roughness has significant changes when the oxygen pressure was varied. Therefore, the oxygen pressure plays a key role in the quality HA layer developed using Pulsed Laser Disposition.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference EOSINT, Plastic laser-sintering for direct manufacturing. EOS GmgH, Technical Data. Bimingham—UK, 2002. Fine Polyamide PA 2200 for EOSINT P., Material Data Sheet EOSINT, Plastic laser-sintering for direct manufacturing. EOS GmgH, Technical Data. Bimingham—UK, 2002. Fine Polyamide PA 2200 for EOSINT P., Material Data Sheet
2.
go back to reference Tyndyk M, Lohfeld S, Barron V, McHugh E (2006) Assessment of SLS fabricated scaffolds for skeletal reconstruction in the spine. J Biomech 39 (Suppl 1) Tyndyk M, Lohfeld S, Barron V, McHugh E (2006) Assessment of SLS fabricated scaffolds for skeletal reconstruction in the spine. J Biomech 39 (Suppl 1)
3.
go back to reference Gibson I, Cheung LK, Chow SP, Cheung WL, Beh SL, Savalani M, Lee SH (2004) The use of Rapid Prototyping to assist medical applications”, 10èmes Assises Européennes de Prototypage Rapide—14 and 15 Sept 2004 Gibson I, Cheung LK, Chow SP, Cheung WL, Beh SL, Savalani M, Lee SH (2004) The use of Rapid Prototyping to assist medical applications”, 10èmes Assises Européennes de Prototypage Rapide—14 and 15 Sept 2004
4.
go back to reference Salmoria GV, Leite JL, Ahrens CH, Lago A, Pires ATN (2007) Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering: microstructural characterization. Polym Test 26(3):361–368 Salmoria GV, Leite JL, Ahrens CH, Lago A, Pires ATN (2007) Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering: microstructural characterization. Polym Test 26(3):361–368
5.
go back to reference Salmoria GV, Leite JL, Paggi RA, Lago A, Pires ATN (2008) Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior. Polym Test 27(6):654–659 Salmoria GV, Leite JL, Paggi RA, Lago A, Pires ATN (2008) Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior. Polym Test 27(6):654–659
6.
go back to reference Salmoria GV, Ahrens CH, Klauss P, Paggi RA, Oliveira RG, Lago A (2007) Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sintering. Mater Res 10(2):211–214 Salmoria GV, Ahrens CH, Klauss P, Paggi RA, Oliveira RG, Lago A (2007) Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sintering. Mater Res 10(2):211–214
7.
go back to reference Salmoria GV, Leite JL, Lopes C, Machado RAF, Lago A (2007) Advanced research in virtual and rapid prototyping. Taylor & Francis, London, pp 305–311 Salmoria GV, Leite JL, Lopes C, Machado RAF, Lago A (2007) Advanced research in virtual and rapid prototyping. Taylor & Francis, London, pp 305–311
8.
go back to reference Salmoria GV, Leite JL, Lopes CH, Paggi RA, Lago A (2007) Advanced research in virtual and rapid prototyping. Taylor & Francis, London, pp 313–317 Salmoria GV, Leite JL, Lopes CH, Paggi RA, Lago A (2007) Advanced research in virtual and rapid prototyping. Taylor & Francis, London, pp 313–317
9.
go back to reference Bao Q, Chen C, Wang D, Ji Q, Lei T (2005) Pulsed laser deposition and its current research status in preparing hydroxyapatite thin films. Appl Surf Sci 252:1538–1544CrossRef Bao Q, Chen C, Wang D, Ji Q, Lei T (2005) Pulsed laser deposition and its current research status in preparing hydroxyapatite thin films. Appl Surf Sci 252:1538–1544CrossRef
10.
go back to reference Yan W-Q, Nakamura T, Kawanabe K, Nishigochi S, Oka M, Kokuba T (1997) Apatite layer–coated titanium for use as bone bonding implants. J Biomater 18:1185–1190CrossRef Yan W-Q, Nakamura T, Kawanabe K, Nishigochi S, Oka M, Kokuba T (1997) Apatite layer–coated titanium for use as bone bonding implants. J Biomater 18:1185–1190CrossRef
11.
go back to reference Koch CF, Johnson S, Kumar D, Jelinek M, Chrisey DB, Doraiswamy A et al (2007) Pulsed laser deposition of hydroxyapatite thin films. Mater Sci Eng C 27:484–494 Koch CF, Johnson S, Kumar D, Jelinek M, Chrisey DB, Doraiswamy A et al (2007) Pulsed laser deposition of hydroxyapatite thin films. Mater Sci Eng C 27:484–494
12.
go back to reference Bao Q, Chen C, Wang D, Ji Q, Lei T (2005) Pulsed laser deposition and its current research status in preparing hydroxyapatite thin films. Appl Surf Sci 252:1538–1544CrossRef Bao Q, Chen C, Wang D, Ji Q, Lei T (2005) Pulsed laser deposition and its current research status in preparing hydroxyapatite thin films. Appl Surf Sci 252:1538–1544CrossRef
13.
go back to reference Chen XY, Liu ZG (1999) Interaction between laser beam and target in pulsed laser deposition: laser fluence and ambient gas effects. Appl Phys A 69(Suppl):S523–S525CrossRef Chen XY, Liu ZG (1999) Interaction between laser beam and target in pulsed laser deposition: laser fluence and ambient gas effects. Appl Phys A 69(Suppl):S523–S525CrossRef
14.
go back to reference Bassim ND, Schenck PK, Donev EU, Heilweil EJ, Cockayne E, Green ML, Feldman LC (2007) Effects of temperature and oxygen pressure on binary oxide growth using aperture-controlled combinatorial pulsed-laser deposition. Appl Surf Sci 254(3):785–788CrossRef Bassim ND, Schenck PK, Donev EU, Heilweil EJ, Cockayne E, Green ML, Feldman LC (2007) Effects of temperature and oxygen pressure on binary oxide growth using aperture-controlled combinatorial pulsed-laser deposition. Appl Surf Sci 254(3):785–788CrossRef
15.
go back to reference Nakata Y, Soumagne G, Okada T, Maeda M (1998) Pulsed-laser deposition of barium titanate films and plume dynamics. Appl Surf Sci 127:650–654 Nakata Y, Soumagne G, Okada T, Maeda M (1998) Pulsed-laser deposition of barium titanate films and plume dynamics. Appl Surf Sci 127:650–654
16.
go back to reference Gonzalo J, Roman RGS, Perriere J, Afonso CN, Casero RP (1998) Pressure effects during pulsed-laser deposition of barium titanate thin films. Appl Phys A 66(5):487–491 Gonzalo J, Roman RGS, Perriere J, Afonso CN, Casero RP (1998) Pressure effects during pulsed-laser deposition of barium titanate thin films. Appl Phys A 66(5):487–491
17.
go back to reference Tyunina M, Levoska J, Leppavuori S (1998) Experimental studies and modeling of Pb–Zr–Ti–O film growth in pulsed laser deposition. J Appl Phys 83(10):5489–5496 Tyunina M, Levoska J, Leppavuori S (1998) Experimental studies and modeling of Pb–Zr–Ti–O film growth in pulsed laser deposition. J Appl Phys 83(10):5489–5496
18.
go back to reference Zhang J, Cui D, Zhou Y, Li L, Chen Z, Szabadi M, Hess P (1996) Effect of oxygen pressure on the orientation, lattice parameters and surface morphology of laser ablated BaTiO 3 thin films. Thin Solid Films 287(1):101–103 Zhang J, Cui D, Zhou Y, Li L, Chen Z, Szabadi M, Hess P (1996) Effect of oxygen pressure on the orientation, lattice parameters and surface morphology of laser ablated BaTiO 3 thin films. Thin Solid Films 287(1):101–103
19.
go back to reference Zhao T, Chen F, Lu H, Yang G, Chen Z (2000) Thickness and oxygen pressure dependent structural characteristics of BaTiO3 thin films grown by laser molecular beam epitaxy. J Appl Phys 87:7442–7447 Zhao T, Chen F, Lu H, Yang G, Chen Z (2000) Thickness and oxygen pressure dependent structural characteristics of BaTiO3 thin films grown by laser molecular beam epitaxy. J Appl Phys 87:7442–7447
20.
go back to reference Salmoria GV, Leite JL, Paggi RA (2009) The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering. J Polym Test 28:746–751CrossRef Salmoria GV, Leite JL, Paggi RA (2009) The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering. J Polym Test 28:746–751CrossRef
21.
go back to reference Van Hooreweder B, Moens D, Boonen R, Kruth J-P (2013) Paul Sas “On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering”. Polym Test 32:972–981CrossRef Van Hooreweder B, Moens D, Boonen R, Kruth J-P (2013) Paul Sas “On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering”. Polym Test 32:972–981CrossRef
22.
go back to reference Liu Y, Hou D, Wang G (2004) A simple wet chemical synthesis and characterization of hydroxyapatite nanorods. Mater Chem Phys 86:69–73CrossRef Liu Y, Hou D, Wang G (2004) A simple wet chemical synthesis and characterization of hydroxyapatite nanorods. Mater Chem Phys 86:69–73CrossRef
23.
go back to reference Lee W-J, Lee S-W, Kim H-L, Kim D-J, Han J-S (2005) Characteristics of calcium phosphate films prepared by pulsed laser deposition under various water vapor pressures Lee W-J, Lee S-W, Kim H-L, Kim D-J, Han J-S (2005) Characteristics of calcium phosphate films prepared by pulsed laser deposition under various water vapor pressures
24.
go back to reference Jo JH, Tae-Bong HVR, Kwak JS, Kwon DY, Hwang YH, Kim HK (2005) “Effects of oxygen pressure on the crystalline of ZnO films grown on sapphire by PLD method.” J Korean Phys Soc 47:S300–S303 Jo JH, Tae-Bong HVR, Kwak JS, Kwon DY, Hwang YH, Kim HK (2005) “Effects of oxygen pressure on the crystalline of ZnO films grown on sapphire by PLD method.” J Korean Phys Soc 47:S300–S303
25.
go back to reference Haider AJ (2009) “An interesting experimental observation of O2 pressure effect on the surface roughness of ZnO thin films prepared by PLD technique”. Iraqi J Appl Phys Lett 2(4):3, 4 Haider AJ (2009) “An interesting experimental observation of O2 pressure effect on the surface roughness of ZnO thin films prepared by PLD technique”. Iraqi J Appl Phys Lett 2(4):3, 4
Metadata
Title
Influence of Oxygen Partial Pressure on Hydroxyapatite Coating of Additive Manufactured Component by Pulsed Laser Deposition
Authors
K. Hariharan
G. Arumaikkannu
Copyright Year
2017
Publisher
Springer Singapore
DOI
https://doi.org/10.1007/978-981-10-0812-2_5

Premium Partners