Top

Journal of Coatings Technology and Research

Published in:

12-01-2022

Influence of pigment and binder composition on the dynamic water penetration and dried structure of precoating layers for double-coated paper

Authors: Hye Jung Youn, Hak Lae Lee

Published in: Journal of Coatings Technology and Research | Issue 3/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The influence of precoating colors on the dynamic water penetration behavior of double-coated paper was investigated using a laboratory coater equipped with two coating heads. Emphasis was placed on the effects of the pigment combination and binder type on dynamic water penetration. In addition, the latex content on the surface of the coating layer was examined by UV absorbance analysis. The amount of water that penetrated the base paper was found to be proportional to the square root of the contact time between the coating color and the base paper, regardless of the pigments and binders used. When a large amount of pigment with a fine particle size was used, or the starch binder content was increased, the low shear viscosity of the coating color increased, and the amount of water penetration into the base paper decreased. The UV absorbance analysis showed that higher water holding in the coating color increased the latex content on the surface of the coating layer. Increasing the viscosity or water retention of the coating color was found to reduce the amount of binder migration into the base paper.

previous article Investigation of effect of type of pigment/extender on the stability of high pigment volume concentration water-based architectural paint

next article Thin liquid films on a rotary bell atomizer in surface-following coordinates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Lee, HL, Youn, HJ, He, M, Chen, J, “Back-Trap Mottle: A Review of Mechanisms and Possible Solutions.” Bioresources, 16 (3) 4444 (2020)

Nutbeem, C., Hallam, B, “Functional Precoats for Multilayer Coating.” Proc. Asian Paper Conference, Bangkok, Thailand, June 2010

Nutbeem, C, Hiorns, T, Hallam, B, “Optimised Precoats for Multilayer Coating.” Proc. TAPPI PaperCon, Covington, KY, USA, May 2011

Kim, S-K, Won, JM, Lee, Y-K, “Improvement of Printability by the New Design of the Multi-layered Coating Structure (II)–The Effect of Pigment Blending in Precoating Layer on Characteristics of Top-Coating Layer.” J. Korea TAPPI, 48 (2) 61–67 (2016)

Hirons, T, Nesbit, T, “Effect of Kaolin Addition to Calcium Carbonate Precoats.” Proc. TAPPI Spring Technical Conference, Chicago, IL, May 2003

Dahlström, C, Uesaka, T, “New Insights into Coating Uniformity and Base Sheet Structures.” Ind. Eng. Chem. Res., 48 (23) 10472–10478 (2009)CrossRef

Ridgway, CJ, Schoelkopf, J, Gane, PAC, Matthews, GP, James, PW, “The Effects of Void Geometry and Contact Angle on the Absorption of Liquids into Porous Calcium Carbonate Structures.” J. Colloid Interface Sci., 239 (2) 417–431 (2001)CrossRef

Preston, JS, Husband, JC, Norouzi, N, Blair, D, Heard, P, “Printing Strength & Analysis of the Distribution of Model Fountain Solution in Kaolin and Calcium Carbonate Coatings.” Proc. TAPPI PaperCon, Dallas, TX, USA, May 2008

Preston, J, Hiorns, AG, Elton, N, Strom, G, “Application of Imaging Reflectometry to Studies of Print Mottle on Commercially Printed Coated Papers.” Tappi J., 7 (1) 11–18 (2008)

10.

Ström, G, Hornatowska, J, Terasaki, O, “A Novel SEM Cross-Section Analysis of Paper Coating for Separation of Latex from Void Volume.” Nord. Pulp Paper Res. J., 25 (1) 107–113 (2010)CrossRef

11.

Gagnon, R., Hiscock, D, “Reducing Back-trap Mottle in Multilayer Coating Systems, Influence of Precoat Composition and Structure.” Proc. TAPPI Coating & Graphic Arts Conference, Atlanta, GA, USA, April 2006

12.

Gaskin, E, Preston, J, Findlay, A, Heard, P, Lucato, A, Costa, E, “Impact of Precoat Structure on Topcoat Performance in Coated Board.” O Papel, 81 (1) 66–73 (2020)

13.

Laudone, GM, Matthews, PG, Gane, PAC, “Observation of Shrinkage During Evaporative Drying of Water-Based Paper Coatings.” Ind. Eng. Chem. Res., 43 712–719 (2004)CrossRef

14.

Sakano, M, Shigetomi, K, “Influence of Dynamic Water Retention of Coating Color on Coating Smoothness.” Japan TAPPI J., 44 (11) 62–72 (1999)

15.

Fujiwara, H, Kline, JE, “Ultraviolet Absorption of Styrene-Butadiene Latex on Pigment-Coated Paper.” Tappi J., 70 (12) 97–100 (1987)

16.

Kline, JE, “The Use of Ultraviolet Analysis on Coated Paper.” Proc. TAPPI Coating Conference, New Orleans, LA, USA, May 1998

17.

Bristow, A, “Liquid Absorption into Paper During Short Time Intervals.” Svensk Papperstid., 70 (19) 623 (1967)

18.

Eklund, DE, Salminen, PJ, “Water Transport in the Blade Coating Process.” Tappi J., 69 (9) 116 (1986)

19.

Gron, J, Salminen, P, Toivakka, M, Paltakari, J, “Coating Layer Consolidation and Formation of the Coating Layer Structure.” In: Paltakar, J (ed.) Pigment Coating and Surface Sizing of Paper, Papermaking Science and Technology. 2^nd Ed. Book 11. pp. 355–397. Paperi ja Puu, Helsinki (2009)

20.

Letzelter, P, Eklund, D, “Coating Colour Dewatering in Blade Coaters.” Proc. TAPPI Coating Conference. Minneapolis, MN, USA, May 1993

21.

Johnson, RW, Abrams, L, Maynard, RB, Amick, TJ, “Use of Mercury Porosimetry to Characterize Pore Structure and Model End-Use Properties of Coated Papers- Part 1: Optical and Strength Properties.” Tappi J., 82 (1) 239 (1999)

22.

Donigian, DW, Ishley, JN, Wise, KJ, “Coating Pore Structure and Offset Printed Gloss.” Tappi J., 80 (5) 163 (1997)

23.

Abrams, L, Capano, PJ, Favorite, CW, Johnson, RW, “Using Mercury Porosimetry to Characterize Coating Pore Structure and Its Relation to Coating Optical Performance.” Proc. TAPPI Coating Conference, Nashville, TN, USA, May 1996

24.

Lee, J-H, Oh, K, Rajabi Abhari, A, Lee, HL, “Characterization of Paper Coating Structure Using FIB and FE-SEM. 1. A New Method for Image Analysis.” Ind. Eng. Chem. Res., 57 (12) 4237–4244 (2018)CrossRef

25.

Lee, J-H, Lee, HL, “Characterization of the Paper Coating Structure Using Focused Ion Beam and Field-Emission Scanning Electron Microscopy. 2. Structural Variation Depending on the Glass Transition Temperature of an S/B Latex.” Ind. Eng. Chem. Res., 57 (49) 16718–16726 (2018)CrossRef

26.

Lee, HL, “Coating Structure and Ink Absorption Properties of Coated Paper Affected by Coating Formulation (I)—Coating Structure.” J. Korea TAPPI, 24 (1) 5–18 (1992)

Title: Influence of pigment and binder composition on the dynamic water penetration and dried structure of precoating layers for double-coated paper
Authors: Hye Jung Youn
Hak Lae Lee
Publication date: 12-01-2022
Publisher: Springer US
Published in: Journal of Coatings Technology and Research / Issue 3/2022
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-021-00569-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2022

Recent progress of self-healing coatings for magnesium alloys protection

A review on predictive tortuosity models for composite films in gas barrier applications

Antibacterial noncytotoxic chitosan coatings on polytetrafluoroethylene films by plasma grafting for medical device applications

Efficacy and mechanism of GO/IBTS coating against microbial fouling of concrete surfaces in marine tidal areas

Investigation of effect of type of pigment/extender on the stability of high pigment volume concentration water-based architectural paint

Thin liquid films on a rotary bell atomizer in surface-following coordinates

Premium Partners