Top

Published in:

2024 | OriginalPaper | Chapter

Influence of Process Parameters and Die Design on the Microstructure and Texture Development of Direct Extruded Magnesium Flat Products

Authors : Maria Nienaber, Nabil Safieh, Jan Bohlen, Noomane Ben Khalifa

Published in: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This chapter delves into the critical factors influencing the microstructure and texture development of direct extruded magnesium flat products. It examines the role of alloy composition, process parameters such as temperature and speed, and the design of extrusion dies. The study reveals how these factors interact to shape the final material properties, with a particular focus on the formation of crystallographic textures and their impact on the mechanical behavior of Mg alloys. The research combines experimental procedures and advanced simulations to offer a detailed understanding of the extrusion process, making it an essential read for professionals seeking to optimize the production of high-quality magnesium products.

AI Generated

This summary of the content was generated with the help of AI.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Numerical Investigation of Full Forward Extrusion with Downstream Strain Hardening via Deep Rolling

next chapter Influence of Material Flow on Forming Conditions in Backward Cup Extrusion

Agnew, S.R., Duygulu, O.: Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. Int. J. Plast. 21(6), 1161–1193 (2005)CrossRef

Al-Samman, T.: Modification of texture and microstructure of magnesium alloy extrusions by particle-stimulated recrystallization. Mater. Sci. Eng., A 560, 561–566 (2013)CrossRef

Barrett, C.D., Imandoust, A., Oppedal, A.L., et al.: Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys. Acta Mater. 128, 270–283 (2017)CrossRef

Beausir, B., Biswas, S., Kim, D.I., et al.: Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. Acta Mater. 57(17), 5061–5077 (2009)CrossRef

Ben Khalifa, N., Isakovic, J., Bohlen, J.: New concepts of extrusion dies to reduce the anisotropy of extruded profiles by means of additive manufacturing. CIRP Ann. 70(1), 231–234 (2021)CrossRef

Bohlen, J., Cano, G., Drozdenko, D., et al.: Processing effects on the formability of magnesium alloy sheets. Metals 8(2), 147 (2018)CrossRef

Bohlen, J., Yi, S.B., Letzig, D., et al.: Effect of rare earth elements on the microstructure and texture development in magnesium-manganese alloys during extrusion. Mater. Sci. Eng., A 527(26), 7092–7098 (2010)CrossRef

Friedrich, H.E., Mordike, B.L.: Magnesium technology: metallurgy, design data, applications. Springer-Verlag, Heidelberg (2006)

Gall, S., Coelho, R.S., Muller, S., et al.: Mechanical properties and forming behavior of extruded AZ31 and ME21 magnesium alloy sheets. Mater. Sci. Eng., A 579, 180–187 (2013)CrossRef

10.

Hantzsche, K., Bohlen, J., Wendt, J., et al.: Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets. Scripta Mater. 63(7), 725–730 (2010)CrossRef

11.

Imandoust, A., Barrett, C.D., Al-Samman, T., Inal, K.A., El Kadiri, H.: A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys. J. Mater. Sci. 52(1), 1–29 (2016). https://doi.org/10.1007/s10853-016-0371-0CrossRef

12.

Isakovic, J., Bohlen, J., Ben Khalifa, N., et al.: Microstructure development of magnesium alloys AZ31 and AZ80 due to temperature evolution during direct extrusion. In: International Aluminum Extrusion Technology. ET Foundation, Orlando, Florida, USA (2022)

13.

Kurz, G., Nienaber, M., Bohlen, J., Letzig, D., Kainer, K.U.: Variation of extrusion process parameter for the magnesium alloy ME21. In: Jordon, J.B., Miller, V., Joshi, V.V., Neelameggham, N.R. (eds.) Magnesium Technology 2020. TMMMS, pp. 181–188. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-36647-6_29CrossRef

14.

Nienaber, M., Kainer, K.U., Letzig, D., Bohlen, J.: Processing effects on the formability of extruded flat products of magnesium alloys. Frontiers in Materials 6, 253 (2019). https://doi.org/10.3389/fmats.2019.00253CrossRef

15.

Nienaber, M., Kurz, G., Letzig, D., Kainer, K.U., Bohlen, J.: Effect of process temperature on the texture evolution and mechanical properties of rolled and extruded AZ31 flat products. Crystals 12(9), 1307 (2022). https://doi.org/10.3390/cryst12091307CrossRef

16.

Stanford, N., Barnett, M.R.: The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility. Mater. Sci. Eng., A 496(1–2), 399–408 (2008)CrossRef

17.

Styczynski, A., Hartig, C., Bohlen, J., et al.: Cold rolling textures in AZ31 wrought magnesium alloy. Scripta Mater. 50(7), 943–947 (2004)CrossRef

18.

Victoria-Hernandez, J., Yi, S., Bohlen, J., et al.: The influence of the recrystallization mechanisms and grain growth on the texture of a hot rolled AZ31 sheet during subsequent isochronal annealing. J. Alloy. Compd. 616, 189–197 (2014)CrossRef

19.

Yang, Q., Jiang, B., Tian, Y., et al.: A tilted weak texture processed by an asymmetric extrusion for magnesium alloy sheets. Mater. Lett. 100, 29–31 (2013)CrossRef

20.

Yu, H., Hyuk Park, S., Sun You, B., et al.: Effects of extrusion speed on the microstructure and mechanical properties of ZK60 alloys with and without 1 wt% cerium addition. Mater. Sci. Eng., A 583, 25–35 (2013)CrossRef

21.

Zeng, Z., Stanford, N., Davies, C.H.J., et al.: Magnesium extrusion alloys: a review of developments and prospects. Int. Mater. Rev. 64(1), 27–62 (2018)CrossRef

Title: Influence of Process Parameters and Die Design on the Microstructure and Texture Development of Direct Extruded Magnesium Flat Products
Authors: Maria Nienaber
Nabil Safieh
Jan Bohlen
Noomane Ben Khalifa
Publisher: Springer Nature Switzerland
Book: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity
Print ISBN: 978-3-031-41022-2

Electronic ISBN: 978-3-031-41023-9

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-41023-9_52