Top

European Journal of Wood and Wood Products

Published in:

30-03-2021 | Original Article

Influence of provenance on physical and mechanical properties of Angelim-pedra (Hymenolobium petraeum Ducke.) wood species

Authors: Julia Naves Teixeira, Anderson Renato Vobornik Wolenski, Vinicius Borges de Moura Aquino, Tulio Hallak Panzera, Diogo Aparecido Lopes Silva, Cristiane Inácio Campos, Sérgio Augusto Mello Silva, Francisco Antonio Rocco Lahr, André Luis Christoforo

Published in: European Journal of Wood and Wood Products | Issue 5/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This research aims to investigate, with the aid of the Brazilian standard NBR 7190, analysis of variance (ANOVA—5% significance) and the regrouping bootstrap technique, the influence of the provenance regions Bonfim, Mucajaí and Claudia on the physical and mechanical properties (twenty properties and 720 determinations) of Angelim-pedra (Hymenolobium petraeum Ducke.) and to assess the possibility of estimating, via regression models (152 in all), the physical and mechanical properties investigated as a function of apparent density (ρ₁₂) and compressive strength parallel to the grain (f_c0). The results indicated equivalence in most of the physical and mechanical properties, evidencing the small influence of the tree harvest regions. From the regression models, some were considered significant by ANOVA (at the 5% level of significance), which implies that variations in ρ₁₂ and f_c0 explain variations in the values of the other estimated properties; however, the low precision indicates that it is not feasible to estimate the variables just based on the ρ₁₂ or f_c0.

previous article Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density

next article Core and panel types affect the mechanical properties and failure modes of the wood-based XX-type lattice sandwich structure

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

ABNT (1997) Projeto de estruturas de madeira (Timber structures design) NBR 7190. Associação Brasileira de Normas Técnicas 107

Adamopoulos S, Passialis C (2010) Relationship of toughness and modulus of elasticity in static bending of small clear spruce wood specimens. Eur J Wood Prod 68:109–111. https://doi.org/10.1007/s00107-009-0365-6CrossRef

Almeida JPB, Aquino VBM, Wolenski ARV et al (2020) Analysis of relations between the moduli of elasticity in compression, tension, and static bending of hardwoods. BioResources 15:3278–3288. https://doi.org/10.15376/biores.15.2.3278-3288CrossRef

Beech E, Rivers M, Oldfield S, Smith PP (2017) GlobalTreeSearch: the first complete global database of tree species and country distributions. J Sustain Forest 36:454–489. https://doi.org/10.1080/10549811.2017.1310049CrossRef

Brasil (2019) Brazilian Woods—Angelim-Pedra. In: Ministério do Meio Ambiente - Serviço Florestal Brasileiro (Ministry of Environment—Brazilian Forest Service). http://sistemas.florestal.gov.br/madeirasdobrasil/features.php?ID=127&caracteristica=19 Accessed on 13 Oct 2019

Cavalheiro RS, Almeida DH, Almeida TH et al (2016) Density as estimator of shrinkage for some Brazilian wood species. Int J Mater Eng 6:107–112. https://doi.org/10.5923/j.ijme.20160603.08CrossRef

Christoforo AL, Aftimus BHC, Panzera TH et al (2017) Physico-mechanical characterization of the anadenanthera colubrina wood specie. Engenharia Agricola 37:376–384. https://doi.org/10.1590/1809-4430-Eng.Agric.v37n2p376-384/2017CrossRef

Christoforo AL, de S. Almeida A, Lanini TLS et al (2019) Estimation of the characteristic value of wood strength. Engenharia Agricola 39:127–132. https://doi.org/10.1590/1809-4430-Eng.Agric.v39n1p127-132/2019CrossRef

Christoforo AL, Couto NG, Almeida JPB et al (2020) Apparent density as an estimator of wood properties obtained in tests where failure is fragile. Engenharia Agrícola 40:105–112. https://doi.org/10.1590/1809-4430-eng.agric.v40n1p105-112/2020CrossRef

Csordós D, Németh R, Bak M (2014) Variation of colour properties between and within New Robinia varieties with enhanced growing rates from different sites. BioResources 9:7099–7108. https://doi.org/10.15376/biores.9.4.7099-7108CrossRef

da Costa Cardodo C, Moutinho VHP, de Oliveira Melo L et al (2012) Caracterização físico-mecânica de madeiras amazônicas com aptidão tecnológica para comercialização (Physical and mechanical characterization of Amazon wood with technological potential for marketing). Rev Ciências Agrárias 55:176–183. https://doi.org/10.4322/rca.2012.053CrossRef

Dadzie PK, Amoah M (2015) Density, some anatomical properties and natural durability of stem and branch wood of two tropical hardwood species for ground applications. Eur J Wood Prod 73:759–773. https://doi.org/10.1007/s00107-015-0925-xCrossRef

Almeida TH de (2015) Estudo da estabilidade dimensional de madeiras tropicais brasileiras. (Study of Dimensional Stability of Tropical Timber). 103 p. Dissertation. Universidade de São Paulo

de Almeida DH, de Mello Scaliante R, Christoforo AL et al (2014) Tenacidade da madeira como função da densidade aparente (Wooden Toughness as a Function of the Apparent Density). Revista Árvore 38:203–207. https://doi.org/10.1590/S0100-67622014000100020CrossRef

de Jesus Albuquerque Nogueira MC, de Almeida DH, de Araujo VA et al (2019) Physical and mechanical properties of Eucalyptus saligna wood for timber structures. Ambiente Construído 19:233–239. https://doi.org/10.1590/s1678-86212019000200319CrossRef

Dias FM, Lahr FAR (2004) Estimativa de propriedades de resistência e rigidez da madeira através da densidade aparente. (Strength and stiffness properties of wood estimated through the specific gravity). Scientia Forestalis 102–113

EN (2008) Eurocode 5: design of timber structures—part 1–1: general—common rules and rules for buildings. Belgium, Brussels

Ferreira GC, Hopkins MJG, de Secco R, S, (2005) Contribuição ao conhecimento morfológico das espécies de leguminosae comercializadas no estado do Pará, como “angelim.” (Contribution to the morphologic knowledge of the species of leguminosae in the state of Pará, traded as “angelim”). Acta Amazonica 34:219–232. https://doi.org/10.1590/s0044-59672004000200010CrossRef

Galvão APM, Jankowsky IP (1985) Secagem racional da madeira. (Wood rational drying) Nobel, São Paulo, p 108p

Huda AASM, Koubaa A, Cloutier A et al (2014) Variation of the physical and mechanical properties of hybrid poplar clones. BioResources 9:1456–1471. https://doi.org/10.15376/biores.9.1.1456-1471CrossRef

Hurmekoski E, Jonsson R, Nord T (2015) Context, drivers, and future potential for wood-frame multi-story construction in Europe. Technol Forecast Soc Chang 99:181–196. https://doi.org/10.1016/j.techfore.2015.07.002CrossRef

IPT (2019) Informações sobre Madeiras. (Information about woods) http://www.ipt.br/informacoes_madeiras/8.htm. Accessed on 21 Feb. 2021

Komariah RN, Hadi YS, Massijaya MY, Suryana J (2015) Physical-mechanical properties of glued laminated timber made from tropical small-diameter logs grown in Indonesia. J Korean Wood Sci Technol 43:156–167. https://doi.org/10.5658/WOOD.2015.43.2.156CrossRef

Lahr FAR, Christoforo AL, Silva CEGD et al (2016) Evaluation of physical and mechanical properties of Jatobá (Hymenaea stilbocarpa Hayne) wood with different levels of moisture content and different regions of extracions. Revista Arvore 40:147–154. https://doi.org/10.1590/0100-67622016000100016CrossRef

Logsdon NB (2003) Dimensional stability: estimates starting from the basic density. Madeira Arquitetura Engenharia 4:1–23

Logsdon NB, De Jesus JMH, Penna JE (2010) Avaliação dos Estimadores da Resistência Característica à Compressão Paralela às Fibras (evaluation of the estimators of the characteristic strength in compression parallel to the grain). Scientia Forestalis 38:579–587

Lorenzi H (1998) Árvores Brasileiras: manual de identificação de plantas arbóreas nativas do Brasil (Brazilian trees: manual of identification of native Brazilian tree plants), 2nd edn. Plantarum, Nova Odessa

Machado JS, Louzada JL, Santos AJA et al (2014) Variation of wood density and mechanical properties of blackwood (Acacia melanoxylon R. Br.). Mater Des 56:975–980. https://doi.org/10.1016/j.matdes.2013.12.016CrossRef

Montgomery DC (2012) Design and analysis of experiments, 9th edn. Wiley, New York, p 752

Morales-Condea MJ, Rodríguez-Liñán C, Saporiti-Machado J (2014) Predicting the density of structural timber members in service. The combine use of wood cores and drill resistance data. Materiales de Construcción 64:e029. https://doi.org/10.3989/mc.2014.03113CrossRef

Morando TC, Christoforo AL, de Aquino VBM et al (2019) Characterization of the wood species Qualea albiflora for structural purposes. Wood Res 64:769–776

Ramage M, Foster R, Smith S et al (2017) Super Tall Timber: design research for the next generation of natural structure. J Arch 22:104–122. https://doi.org/10.1080/13602365.2016.1276094CrossRef

Romagnoli M, Cavalli D, Spina S (2014) Wood quality of chestnut: relationship between ring width, specific gravity, and physical and mechanical properties. BioResources 9:1132–1147. https://doi.org/10.15376/biores.9.1.1132-1147CrossRef

Ruelle J, Beauchêne J, Yamamoto H, Thibaut B (2011) Variations in physical and mechanical properties between tension and opposite wood from three tropical rainforest species. Wood Sci Technol 45:339–357. https://doi.org/10.1007/s00226-010-0323-9CrossRef

Ruiz-Aquino F, González-Peña MM, Valdez-Hernández JI et al (2018) Mechanical properties of wood of two Mexican oaks: relationship to selected physical properties. Eur J Wood Prod 76:69–77. https://doi.org/10.1007/s00107-017-1168-9CrossRef

Silva CEG, De Almeida DH, De Almeida TH et al (2018) Influence of the procurement site on physical and mechanical properties of cupiúba wood species. BioResources 13:4118–4131. https://doi.org/10.15376/biores.13.2.4118-4131CrossRef

Ter SH, Vaessen RW, Cárdenas-López D et al (2016) The discovery of the Amazonian tree flora with an updated checklist of all known tree taxa. Sci Rep 6:1–15. https://doi.org/10.1038/srep29549CrossRef

ter Steege H, Prado PI, de Lima RAF et al (2020) Biased-corrected richness estimates for the Amazonian tree flora. Sci Rep 10:1–13. https://doi.org/10.1038/s41598-020-66686-3CrossRef

Varga D, van der Zee ME (2008) Influence of steaming on selected wood properties of four hardwood species. Holz Roh- Werkst 66:11–18. https://doi.org/10.1007/s00107-007-0205-5CrossRef

Wieruszewski M, Mazela B (2017) Cross Laminated Timber (CLT) as an alternative form of construction wood. Drvna Ind 68:359–367. https://doi.org/10.5552/drind.2017.1728CrossRef

Wolenski ARV, Peixoto RG, de Moura Aquino VB et al (2020a) Evaluation of mechanical strengths of tropical hardwoods: proposal of probabilistic models. Eur J Wood Prod 78:757–766. https://doi.org/10.1007/s00107-020-01521-0CrossRef

Wolenski ARV, Peixoto RG, Fedotova V et al (2020b) Shear strength estimation model for tropical wood species. Wood Res 65:175–182CrossRef

Title: Influence of provenance on physical and mechanical properties of Angelim-pedra (Hymenolobium petraeum Ducke.) wood species
Authors: Julia Naves Teixeira
Anderson Renato Vobornik Wolenski
Vinicius Borges de Moura Aquino
Tulio Hallak Panzera
Diogo Aparecido Lopes Silva
Cristiane Inácio Campos
Sérgio Augusto Mello Silva
Francisco Antonio Rocco Lahr
André Luis Christoforo
Publication date: 30-03-2021
Publisher: Springer Berlin Heidelberg
Published in: European Journal of Wood and Wood Products / Issue 5/2021
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-021-01692-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 5/2021

Quality assessment of pellets and briquettes made from glued wood waste

Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density

Bark of Astronium lecointei Ducke trees from the Amazon: chemical and structural characterization

Valorization of Pinus taeda bark: source of phenolic compounds, tannins and fuel

Swelling kinetics of thermally modified wood

Laser beam calibration for wood surface colour treatment