Skip to main content
Top

2019 | OriginalPaper | Chapter

Influence of Thermomechanical Treatment on Tension–Compression Yield Asymmetry of Extruded Mg–Zn–Ca Alloy

Authors : P. Dobroň, M. Hegedüs, J. Olejňák, D. Drozdenko, K. Horváth, J. Bohlen

Published in: Magnesium Technology 2019

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Thermomechanical treatment consisting of pre-compression and isothermal aging at 150 °C for 16 h was applied to the extruded Mg–Zn–Ca (ZX10) alloy in order to reduce tension–compression yield asymmetry and improve mechanical properties via strengthening mechanism. With respect to the initial texture of the alloy, pre-compression leads to a formation of extension twins. A solute segregation and precipitation along twin boundaries is realized during a subsequent isothermal aging. After thermomechanical treatment, a solute solution and precipitation hardening contribute to the strengthening of the alloy. Active deformation mechanisms were monitored during compression or tension using the acoustic emission technique.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
2.
go back to reference Dobron, P.; Drozdenko, D.; Olejnak, J.; Hegedus, M.; Horvath, K.; Vesely, J.; Bohlen, J.; Letzig, D. Compressive yield stress improvement using thermomechanical treatment of extruded mg-zn-ca alloy. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2018, 730, 401–409. https://doi.org/10.1016/j.msea.2018.06.026CrossRef Dobron, P.; Drozdenko, D.; Olejnak, J.; Hegedus, M.; Horvath, K.; Vesely, J.; Bohlen, J.; Letzig, D. Compressive yield stress improvement using thermomechanical treatment of extruded mg-zn-ca alloy. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2018, 730, 401–409. https://​doi.​org/​10.​1016/​j.​msea.​2018.​06.​026CrossRef
4.
go back to reference Bohlen, J.; Dobron, P.; Nascimento, L.; Parfenenko, K.; Chmelik, F.; Letzig, D. The effect of reversed loading conditions on the mechanical behaviour of extruded magnesium alloy az31. Acta Physica Polonica A 2012, 122, 444–449.CrossRef Bohlen, J.; Dobron, P.; Nascimento, L.; Parfenenko, K.; Chmelik, F.; Letzig, D. The effect of reversed loading conditions on the mechanical behaviour of extruded magnesium alloy az31. Acta Physica Polonica A 2012, 122, 444–449.CrossRef
5.
go back to reference Drozdenko, D.; Bohlen, J.; Chmelik, F.; Lukac, P.; Dobron, P. Acoustic emission study on the activity of slip and twin mechanisms during compression testing of magnesium single crystals. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2016, 650, 20–27. https://doi.org/10.1016/j.msea.2015.https://doi.org/10.033 Drozdenko, D.; Bohlen, J.; Chmelik, F.; Lukac, P.; Dobron, P. Acoustic emission study on the activity of slip and twin mechanisms during compression testing of magnesium single crystals. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 2016, 650, 20–27. https://​doi.​org/​10.​1016/​j.​msea.​2015.​https://doi.org/10.033
13.
go back to reference Standard test method for dynamic young’s modulus, shear modulus, and poisson’s ratio for advanced ceramics by impulse excitation of vibration. Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration 1994. Standard test method for dynamic young’s modulus, shear modulus, and poisson’s ratio for advanced ceramics by impulse excitation of vibration. Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration 1994.
14.
go back to reference Heiple, C.R.; Carpenter, S.H. Acoustic emission produced by deformation of metals and alloys-a review: Part II. J. Acoust. Emission 1987, 6, 215–237. Heiple, C.R.; Carpenter, S.H. Acoustic emission produced by deformation of metals and alloys-a review: Part II. J. Acoust. Emission 1987, 6, 215–237.
15.
go back to reference Toronchuk, J.P. Acoustic emission during twinning of zinc single crystals. Materials Evaluation 1977, 35, 51–53. Toronchuk, J.P. Acoustic emission during twinning of zinc single crystals. Materials Evaluation 1977, 35, 51–53.
Metadata
Title
Influence of Thermomechanical Treatment on Tension–Compression Yield Asymmetry of Extruded Mg–Zn–Ca Alloy
Authors
P. Dobroň
M. Hegedüs
J. Olejňák
D. Drozdenko
K. Horváth
J. Bohlen
Copyright Year
2019
DOI
https://doi.org/10.1007/978-3-030-05789-3_13

Premium Partners