Top

Metallurgical and Materials Transactions A

Published in:

01-06-2015 | Communication

Infrared Brazing of Ti₅₀Ni₅₀ Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers

Authors: Ren-Kae Shiue, Chia-Pin Chen, Shyi-Kaan Wu

Published in: Metallurgical and Materials Transactions A | Issue 6/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Dissimilar infrared brazing Ti₅₀Ni₅₀ and AISI 316L stainless steel using two silver-based fillers, Cusil-ABA and Ticusil, was evaluated. The shear strength of the Ticusil brazed joint is higher than that of the Cusil-ABA brazed one due to the formation of better fillet. The maximum shear strength of 237 MPa is obtained for the Ticusil joint brazed at 1223 K (950 °C) for 60 seconds. The presence of interfacial Ti-Fe-(Cu) layer is detrimental to the shear strength of all joints.

previous article Observation of the TWIP + TRIP Plasticity-Enhancement Mechanism in Al-Added 6 Wt Pct Medium Mn Steel

next article Strong Anisotropic Effects of p-Type Bi2Te3 Element on the Bi2Te3/Sn Interfacial Reactions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

K. Otsuka and K. Shimizu: Int. Met. Rev., 1986, vol. 31, pp. 93–114.CrossRef

K. Otsuka and X. Ren: Progr. Mater. Sci., 2005, vol. 50, pp. 511–678.CrossRef

Y. Fu, H. Du, W. Huang, S. Zhang, and M. Hu: Sens. Actuat. A, 2004, vol. 112, pp. 395–408.CrossRef

M.F. Montemor, M.G.S. Ferreira, N.E. Hakiki, and M. Da Cunha Belo: Corr. Sci., 2000, vol. 42, pp. 1635–50.CrossRef

J.G. Lee, S.J. Hong, M.K. Lee, and C.K. Rhee: J. Nucl. Mater., 2009, vol. 395, pp. 145–49.CrossRef

R.S. Tashi, S.A.A. Mousavi, and M.M. Atabaki: Mater. Des., 2014, vol. 54, pp. 161–7.CrossRef

O. Kozlova, R. Voytovych, M.F. Devismes, and N. Eustathopoulos: Mater. Sci. Eng. A, 2008, vol. 495, pp. 96–101.CrossRef

A.P. Xian and Z.Y. Si: J. Mater. Sci., 1990, vol. 25, pp. 4483–87.CrossRef

X. Yue, P. He, J.C. Feng, J.H. Zhang, and F.Q. Zhu: Mater. Charact., 2008, vol. 59, pp. 1721–27.CrossRef

10.

C.C. Liu, C.L. Ou, and R.K. Shiue: J. Mater. Sci., 2002, vol. 37, pp. 2225–35.CrossRef

11.

R.H. Shiue and S.K. Wu: Intermetallics, 2006, vol. 14, pp. 630–38.CrossRef

12.

R.K. Shiue, Y.H. Chang, and S.K. Wu: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 54–60.

13.

P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1995.

14.

T.B. Massalski: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990.

15.

J.A. van Beek, A.A. Kodentsov, and F.J.J. van Loo: J. Alloys Compd., 1995, vol. 217, pp. 97–103.CrossRef

16.

M. Ghosh, S. Chatterjee, and B. Mishra: Mater. Sci. Eng. A, 2003, vol. 363, pp. 268–74.CrossRef

17.

H.L.J. Pang: Int. J. Fatigue, 1993, vol. 15, pp. 31–36.CrossRef

18.

Y. Verreman and B. Nie: Fatigue Fract. Eng. Mater. Struct., 1996, vol. 19, pp. 669–81.CrossRef

Title: Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers
Authors: Ren-Kae Shiue
Chia-Pin Chen
Shyi-Kaan Wu
Publication date: 01-06-2015
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 6/2015
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-015-2830-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2015

Effect of Metallic Glass Particle Size on the Contact Resistance of Ag/Metallic Glass Electrode

Near-Surface Microstructure on Twin-Roll Cast 8906 Aluminum Alloy

Crystallization Kinetics of Fe76.5−x C6.0Si3.3B5.5P8.7Cu x (x = 0, 0.5, and 1 at. pct) Bulk Amorphous Alloy

Age Hardening in Ultrafine-Grained Al-2 Pct Fe Alloy Processed by High-Pressure Torsion

Influence of Plastic Deformation on Low-Temperature Surface Hardening of Austenitic Stainless Steel by Gaseous Nitriding

Oxidation Behavior of Germanium- and/or Silicon-Bearing Near-α Titanium Alloys in Air

Premium Partners