Top

Journal of Materials Engineering and Performance

Published in:

03-11-2021

Intergranular Corrosion Resistance of Stainless Steel Coating with Ultralow Dilution Rates Manufactured by Tungsten Arc Welding Technology

Authors: Yaowei Wang, Yiming Huang, Lixin Wang, Lijun Yang

Published in: Journal of Materials Engineering and Performance | Issue 3/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The deposition of austenitic stainless steel coatings on high-strength low-alloy steel surfaces was a common method in engineering. However, excessive dilution of the substrate resulting in degradation of the coating properties is a constant challenge. In this paper, tungsten argon arc welding (TIG) technology was optimized based on the response surface method to produce a very low dilution (4%) stainless steel coating on the surface of Q355 steel. The intergranular corrosion sensitivity of the two coatings was tested by the double-loop electrochemical potentiodynamic reactivation technique. The DOS value of the coating made by the TIG technique (6.83%) is lower than that of the coating made by flux-cored arc welding (9.31%). The improved intergranular corrosion resistance is attributed to the dilution rate, grain size, grain boundary type, and inclusions. A technique of manufacturing low dilution coatings is provided, achieving a 50% savings in welding material.

previous article Effect of Secondary Coating on Weldability, Joint Performance, and Electrode Life in Resistance Seam Welding of Galvannealed Interstitial Free Steel

next article Effect of Tool-Workpiece Relative Position on Microstructure and Mechanical Properties of Al-Cu Dissimilar Friction Stir Weld

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

P. Luchtenberg, P.T. de Campos, P. Soares, C.A.H. Laurindo, O. Maranho and R.D. Torres, Effect of Welding Energy on the Corrosion and Tribological Properties of Duplex Stainless Steel Weld Overlay Deposited by GMAW/CMT Process, Surf. Coat. Technol., 2019, 375, p 688–693. https://doi.org/10.1016/j.surfcoat.2019.07.072CrossRef

M. Moradi, M.K. Moghadam and M. Kazazi, Improved Laser Surface Hardening of AISI 4130 Low Alloy Steel with Electrophoretically Deposited Carbon Coating, Optik, 2019, 178, p 614–622.CrossRef

F. Weng, S. Gao, J. Jiang, J. Wang and P. Guo, A Novel Strategy to Fabricate thin 316L Stainless Steel Rods by Continuous Directed Energy Deposition in Z Direction, Addit. Manuf., 2019, 27, p 474–481.

H. Zhang, C. Zhang, Q. Wang, C. Wu, S. Zhang, J. Chen and A.O. Abdullah, Effect of Ni Content on Stainless Steel Fabricated by Laser Melting Deposition, Opt. Lasers. Technol., 2018, 101, p 363–371.CrossRef

S. Shukla, A.P. Patil, A.P. Kawale, R.K. Haldkar, A. Dahiwale and A. Bansod, Effect of Grain Refinement on Sensitization of High Manganese Austenitic Stainless Steel, Materials Today: Proceedings, 2021, 44, p 2802–2807. https://doi.org/10.1016/j.matpr.2020.12.833CrossRef

W. Wang, Y. Hu, M. Zhang and H. Zhao, Microstructure and Mechanical Properties of Dissimilar Friction Stir Welds in Austenitic-Duplex Stainless Steels, Mater. Sci. Eng., A, 2020, 787, p 139499. https://doi.org/10.1016/j.msea.2020.139499CrossRef

Q. Xiao, C. Jang, C. Kim, H. Kim, J. Chen and H.B. Lee, Corrosion Behavior of Stainless Steels in Simulated PWR Primary Water: The Effect of Composition and Matrix Phases, Corrosion Sci., 2020, 177, 108991. https://doi.org/10.1016/j.corsci.2020.108991CrossRef

S.-X. Li, Y.-N. He, S.-R. Yu and P.-Y. Zhang, Evaluation of the Effect of Grain Size on Chromium Carbide Precipitation and Intergranular Corrosion of 316L Stainless Steel, Corrosion Sci., 2013, 66, p 211–216. https://doi.org/10.1016/j.corsci.2012.09.022CrossRef

J. Li, H. Li, Y. Liang, P. Liu, L. Yang and Y. Wang, Effects of Heat Input and Cooling Rate During Welding on Intergranular Corrosion Behavior of High Nitrogen Austenitic Stainless Steel Welded Joints, Corrosion Sci., 2020, 166, p 108445. https://doi.org/10.1016/j.corsci.2020.108445CrossRef

10.

X. Qin, X. Guo, J. Lu, L. Chen, J. Qin and W. Lu, Erosion-Wear and Intergranular Corrosion Resistance Properties of AISI 304L Austenitic Stainless Steel after Low-Temperature Plasma Nitriding, J. Alloy. Compd., 2017, 698, p 1094–1101. https://doi.org/10.1016/j.jallcom.2016.12.164CrossRef

11.

Z. Lai, P. Bi, L. Wen, Y. Xue and Y. Jin, Local Electrochemical Properties of Fusion Boundary Region in SA508-309L/308L Overlay Welded Joint, Corrosion Sci., 2019, 155, p 75–85. https://doi.org/10.1016/j.corsci.2019.04.021CrossRef

12.

S.K. Pradhan, P. Bhuyan and S. Mandal, Individual and Synergistic Influences of Microstructural Features on Intergranular Corrosion Behavior in Extra-low Carbon type 304L Austenitic Stainless Steel, Corrosion Sci., 2018, 139, p 319–332. https://doi.org/10.1016/j.corsci.2018.05.014CrossRef

13.

A. La Fontaine, H.-W. Yen, P. Trimby, S. Moody, S. Miller, M. Chensee, S. Ringer and J. Cairney, Martensitic Transformation in an Intergranular Corrosion Area of Austenitic Stainless Steel During Thermal Cycling, Corrosion Sci., 2014, 85, p 1–6. https://doi.org/10.1016/j.corsci.2014.04.048CrossRef

14.

N.V. Rao, G.M. Reddy and S. Nagarjuna, Weld Overlay Cladding of High Strength Low Alloy Steel with Austenitic Stainless Steel-Structure and Properties, Mater. Des., 2011, 32(4), p 2496–2506. https://doi.org/10.1016/j.matdes.2010.10.026CrossRef

15.

H. Yousefi Azad, S.H. Mousavi Anijdan and H. Najafi, The Effect of PWHT on the Microstructural Evolution, Carbides Formation and Mechanical Properties of a Nb Containing Martensitic Heat Resistance Steel Used in Gas Turbine, Mater. Sci. Eng., A, 2020, 793, p 139810. https://doi.org/10.1016/j.msea.2020.139810CrossRef

16.

G. Dak and C. Pandey, A Critical Review on Dissimilar Welds Joint Between Martensitic and Austenitic Steel for Power Plant Application, J. Manuf. Process., 2020, 58, p 377–406. https://doi.org/10.1016/j.jmapro.2020.08.019CrossRef

17.

M. Shamanian, A. Eghlimi, M. Eskandarian and J.A. Szpunar, Interface Microstructure Across Cladding of Super Duplex Stainless Steel with Austenitic Stainless Steel Buffer Layer, Surf. Coat. Technol., 2014, 259, p 532–542. https://doi.org/10.1016/j.surfcoat.2014.10.034CrossRef

18.

A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian, M. Nezakat and J.A. Szpunar, Evaluation of Microstructure and Texture Across the Welded Interface of Super Duplex Stainless Steel and High Strength Low Alloy Steel, Surf. Coat. Technol., 2015, 264, p 150–162. https://doi.org/10.1016/j.surfcoat.2014.12.060CrossRef

19.

A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian and J.A. Szpunar, Characterization of Microstructure and Texture Across Dissimilar Super Duplex/Austenitic Stainless Steel Weldment Joint by Austenitic Filler Metal, Mater. Charact., 2015, 106, p 208–217. https://doi.org/10.1016/j.matchar.2015.05.036CrossRef

20.

X. Di, Z. Zhong, C. Deng, D. Wang and X. Guo, Microstructural Evolution of Transition Zone of clad X70 with Duplex Stainless Steel, Mater. Des., 2016, 95, p 231–236. https://doi.org/10.1016/j.matdes.2016.01.087CrossRef

21.

Y. Zhai, L. Yang, T. He and Y. Liu, Weld Morphology and Microstructure During Simulated Local Dry Underwater FCTIG, J. Mater. Process. Technol., 2017, 250, p 73–80. https://doi.org/10.1016/j.jmatprotec.2017.07.010CrossRef

22.

L. Yang, Y. Wang, T. Sun, Y. Huang, Y. Zhai and T. He, Microstructure and Mechanical Properties of FCTIG-Welded DH36 Steel with Rutile-Type and Basic-Type Flux Cored Wires, J. Mater. Process. Technol., 2020, 275, 116363. https://doi.org/10.1016/j.jmatprotec.2019.116363CrossRef

23.

M. Ragavendran, N. Chandrasekhar, R. Ravikumar, R. Saxena, M. Vasudevan and A.K. Bhaduri, Optimization of Hybrid Laser–TIG Welding of 316LN Steel Using Response Surface Methodology (RSM), Opt. Lasers. Eng., 2017, 94, p 27–36. https://doi.org/10.1016/j.optlaseng.2017.02.015CrossRef

24.

N.R. Baddoo, Stainless Steel in Construction: A Review of Research, Applications, Challenges and Opportunities, J. Constr. Steel. Res., 2008, 64(11), p 1199–1206. https://doi.org/10.1016/j.jcsr.2008.07.011GetCrossRef

25.

J. Verma and R.V. Taiwade, Effect of Welding Processes and Conditions on the Microstructure, Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Weldments—A Review, J. Manuf. Process., 2017, 25, p 134–152. https://doi.org/10.1016/j.jmapro.2016.11.003CrossRef

26.

F. Mas, C. Tassin, F. Roch, M. Yescas, P. Todeschini and Y. Bréchet, Growth Morphologies and Primary Solidification Modes in a Dissimilar Weld Between a Low-Alloy Steel and an Austenitic Stainless Steel, Metals, 2018, 8(4), p 284.CrossRef

27.

Y. Wu and B. Patchett, Formation of Crack-Susceptible Structures of Weld Overlay of Corrosion Resistant Alloys, Mater. Perform. Sulphur Energy, 1992, 1992, p 283–295.

28.

B.O. Okonkwo, H. Ming, J. Wang, F. Meng, X. Xu and E.-H. Han, Microstructural Characterization of Low Alloy Steel A508–309/308L Stainless Steel Dissimilar Weld Metals, Int. J. Press. Ves. Pip., 2021, 190, p 104297.CrossRef

29.

T. Nelson, J. Lippold and M. Mills, Nature and Evolution of the Fusion Boundary in Ferritic-Austenitic Dissimilar Metal Welds—Part 2: On-Cooling Transformations, Welding Research, 2000, 10, p 267–277.

30.

H. Kokawa, M. Shimada, M. Michiuchi, Z.J. Wang and Y.S. Sato, Arrest of Weld-Decay in 304 Austenitic Stainless Steel by Twin-Induced Grain Boundary Engineering, Acta Mater., 2007, 55(16), p 5401–5407. https://doi.org/10.1016/j.actamat.2007.06.005CrossRef

31.

M. Michiuchi, H. Kokawa, Z.J. Wang, Y.S. Sato and K. Sakai, Twin-Induced Grain Boundary Engineering for 316 Austenitic Stainless Steel, Acta Mater., 2006, 54(19), p 5179–5184. https://doi.org/10.1016/j.actamat.2006.06.030CrossRef

32.

V. Randle, Twinning-Related Grain Boundary Engineering, Acta Mater., 2004, 52(14), p 4067–4081. https://doi.org/10.1016/j.actamat.2004.05.031CrossRef

33.

K.S. de Assis, A.C. Rocha, I.C.P. Margarit-Mattos, F.A.S. Serra and O.R. Mattos, Practical Aspects on the Use of On-site Double Loop Electrochemical Potentiodynamic Reactivation Technique (DL-EPR) for Duplex Stainless Steel, Corrosion Sci., 2013, 74, p 250–255. https://doi.org/10.1016/j.corsci.2013.04.050CrossRef

34.

S. Rahimi, D.L. Engelberg and T.J. Marrow, A New Approach for DL-EPR Testing of Thermo-Mechanically Processed Austenitic Stainless Steel, Corrosion Sci., 2011, 53(12), p 4213–4222. https://doi.org/10.1016/j.corsci.2011.08.033CrossRef

35.

S. Kobayashi, R. Kobayashi and T. Watanabe, Control of Grain Boundary Connectivity Based on Fractal Analysis for Improvement of Intergranular Corrosion Resistance in SUS316L Austenitic Stainless Steel, Acta Mater., 2016, 102, p 397–405. https://doi.org/10.1016/j.actamat.2015.08.075CrossRef

36.

J. Zhang, L. Xu, Y. Han, L. Zhao and B. Xiao, New perspectives on the Grain Boundary Misorientation Angle Dependent Intergranular Corrosion of Polycrystalline Nickel-Based 625 Alloy, Corrosion Sci., 2020, 172, p 108718. https://doi.org/10.1016/j.corsci.2020.108718CrossRef

37.

P. Schmuki, H. Hildebrand, A. Friedrich and S. Virtanen, The Composition of the Boundary Region of MnS Inclusions in Stainless Steel and its Relevance in Triggering Pitting Corrosion, Corrosion Sci., 2005, 47(5), p 1239–1250. https://doi.org/10.1016/j.corsci.2004.05.023CrossRef

Title: Intergranular Corrosion Resistance of Stainless Steel Coating with Ultralow Dilution Rates Manufactured by Tungsten Arc Welding Technology
Authors: Yaowei Wang
Yiming Huang
Lixin Wang
Lijun Yang
Publication date: 03-11-2021
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 3/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06358-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2022

Effect of Graphene Nanoplatelets on Progressive Failure Behavior under Internal Pressure of Composite Cylindrical Pressure Vessels

Influence of Different Mixing Processes on Tensile Properties of Graphene-Nanoplatelet-Reinforced Oxide-Dispersion-Strengthened Steel Composites

Study on the Variation in Mechanical Properties along the Dissimilar Weldments of P22 and P91 Steel

The Influence of Polymeric Ester-Type Additives on the Performance of Metal Cutting Fluids for Machining of Titanium Alloy

Fatigue Performance Improvement of 7075-T651 Aluminum Alloy by Ultrasonic Nanocrystal Surface Modification

Structural Elucidation, Morphological Properties, and Dielectric Properties of Nickel-Substituted Cobalt and Lead-Based X-Type Hexagonal Ferrites

Premium Partners