Skip to main content
main-content
Top

Journal

International Journal of Material Forming

International Journal of Material Forming 1/2020

Issue 1/2020

Table of Contents ( 12 Articles )

14-01-2019 | Review | Issue 1/2020

Effect of constitutive model on springback prediction of MP980 and AA6022-T4

Jianping Lin, Yong Hou, Junying Min, Huijun Tang, John E. Carsley, Thomas B. Stoughton

03-01-2019 | Original Research | Issue 1/2020 Open Access

Damage and fracture during sheet-metal forming of alloy 718

Lluís Pérez Caro, Mikael Schill, Kristian Haller, Eva-Lis Odenberger, Mats Oldenburg

12-12-2018 | Original Research | Issue 1/2020

Parametric evaluation of part distortion in additive manufacturing processes

Giacomo Quaranta, Eberhard Haug, Jean Louis Duval, Francisco Chinesta

10-01-2019 | Original Research | Issue 1/2020 Open Access

Characterization and modelling the mechanical behaviour of poly(l-lactic acid) for the manufacture of bioresorbable vascular scaffolds by stretch blow moulding

Huidong Wei, Shiyong Yan, Saurav Goel, Gary Menary

22-01-2019 | Original Research | Issue 1/2020

Bubble assisted vacuum thermoforming: considerations to extend the use of in-situ stereo-DIC measurements to stretching of sagged thermoplastic sheets

A. Ayadi, M.-F. Lacrampe, P. Krawczak

14-01-2019 | Original Research | Issue 1/2020

Design of a genetic algorithm to preform optimization for hot forging processes

Daniel Kampen, Johannes Richter, Thoms Blohm, Johannes Knust, Jan Langner, Malte Stonis, Bernd-Arno Behrens

15-01-2019 | Original Research | Issue 1/2020

Numerical analysis and experimental investigation of surface defects in die hemming process

Gang Wang, Zhengwei Gu, Hong Xu, Ge Yu

18-01-2019 | Original Research | Issue 1/2020

A generalised method for the coupling of a parallelogram-like unit cell with a macroscopic finite element to simulate the behaviour of textiles

Benjamin Kaiser, Thomas Pyttel, Fabian Duddeck

25-01-2019 | Original Research | Issue 1/2020

Analysis of the bond strength of voids closed by open-die forging

Paul Hibbe, Gerhard Hirt

31-01-2019 | Original Research | Issue 1/2020

On the numerical prediction of the torque-to-turn-value of a blind rivet nut

A. Van de Velde, S. Coppieters, J. Maeyens, M. Wevers, D. Debruyne

30-01-2019 | Original Research | Issue 1/2020

Prediction of process-induced void formation in anisotropic Fiber-reinforced autoclave composite parts

Bamdad Barari, Pavel Simacek, Shridhar Yarlagadda, Roger M. Crane, Suresh G Advani

14-05-2019 | Correction | Issue 1/2020

Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion

Nitin Chandola, Oana Cazacu, Benoit Revil-Baudard

Current Publications

Premium Partners

    Image Credits