Skip to main content
main-content
Top

Journal

International Journal of Material Forming

International Journal of Material Forming 2/2020

Issue 2/2020

Table of Contents ( 10 Articles )

06-02-2019 | Original Research | Issue 2/2020 Open Access

Control of ring rolling with variable thickness and curvature

Matthew R. Arthington, Jos Havinga, Stephen R. Duncan

04-03-2019 | Original Research | Issue 2/2020

Characterization of heat transfer coefficient for non-isothermal elevated temperature forming of metal alloys

Kaab Omer, Clifford Butcher, Michael Worswick

05-03-2019 | Original Research | Issue 2/2020

Impact of strain rate sensitivity on the identification of the material parameters scattering and on the formability of zinc sheet

M. Milesi, J. Lecoq, C. Pradille, L. Vitu, N. Boudeau, P.-O. Bouchard

30-03-2019 | Original Research | Issue 2/2020

Rheology of double-base gelled propellants as the basis for extrusion process modelling: influence of normal force on slip layer and flow curves

J. Martinez-Pastor, Patricio Franco, R. A. Oton-Martinez

08-04-2019 | Original Research | Issue 2/2020

Experimental and numerical studies for the gas-assisted extrusion forming of polypropylene micro-tube

Zhong Ren, Xingyuan Huang, Zhihua Xiong

18-03-2019 | Original Research | Issue 2/2020

Effect of process parameters on the roundness of GH3030 continuously variable wall conical rotatory part formed by power spinning

Xuedao Shu, Ying Zhu, Yu Wang, Zixuan Li, Zewei Cen

30-03-2019 | Original Research | Issue 2/2020

A new analytical method for determination of the flow curve for high-strength sheet steels using the plane strain compression test

Charles Chermette, Klaus Unruh, Ilya Peshekhodov, Jérôme Chottin, Tudor Balan

03-04-2019 | Original Research | Issue 2/2020

Hot deformation behavior of 7A04 aluminum alloy at elevated temperature: constitutive modeling and verification

Zhao Qiang, Chen Wen, Lin Jun, Huang Shuhai, Xia Xiangsheng

30-03-2019 | Original Research | Issue 2/2020

Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC

M. Borrego, D. Morales-Palma, A. J. Martínez-Donaire, G. Centeno, C. Vallellano

30-03-2019 | Original Research | Issue 2/2020

Effective location of micro joints and generation of tool path using heuristic and genetic approach for cutting sheet metal parts

Vijay Anand Kandasamy, S. Udhayakumar

Current Publications

Premium Partners

    Image Credits