Skip to main content
main-content
Top

Journal

International Journal of Material Forming

International Journal of Material Forming 3/2020

Issue 3/2020

Table of Contents ( 11 Articles )

03-07-2019 | Original Research | Issue 3/2020

Effects of resin content and precompression treatment on bulk bamboo extrusion

Masako Seki, Yuko Yashima, Tsunehisa Miki, Tomoaki Kiryu, Soichi Tanaka, Kozo Kanayama

16-08-2019 | Original Research | Issue 3/2020

Picture-frame testing of woven prepreg fabric: An investigation of sample geometry and shear angle acquisition

Christian Krogh, Kari D. White, Alessandro Sabato, James A. Sherwood

29-08-2019 | Original Research | Issue 3/2020

Warm deep drawing behavior of Inconel 625 alloy using constitutive modelling and anisotropic yield criteria

Nitin Kotkunde, Anand Badrish, Ayush Morchhale, Prathamesh Takalkar, Swadesh Kumar Singh

06-05-2020 | Original Research | Issue 3/2020

Influence of thickness reduction on forming limits of mild steel DC01

Pedram Farahnak, Miroslav Urbánek, Pavel Konopík, Jan Džugan

03-01-2020 | Original Research | Issue 3/2020

Mechanical and metallurgical characterization of AA6082-T6 sheet-bulk joints produced through a linear friction welding based approach

Gianluca Buffa, Dario Baffari, Antonio Barcellona, Davide Campanella, Livan Fratini

03-01-2020 | Original Research | Issue 3/2020

Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets

Camille M. Poulin, Sven C. Vogel, Yannis P. Korkolis, Brad L. Kinsey, Marko Knezevic

04-03-2020 | Original Research | Issue 3/2020

Advanced FE model validation of cold-forming process using DIC: Air bending of high strength steel

S. Gothivarekar, S. Coppieters, A. Van de Velde, D. Debruyne

02-04-2020 | Original Research | Issue 3/2020

Electromagnetic flanging: from elementary geometries to aeronautical components

Cheikh Tidiane Sow, Grégoire Bazin, Thomas Heuzé, Guillaume Racineux

27-02-2020 | Original Research | Issue 3/2020

Influence of material modeling on warm forming behavior of nickel based super alloy

Anand Badrish, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh

04-05-2020 | Original Research | Issue 3/2020 Open Access

From specified product tolerance to acceptable material and process scatter: an inverse robust optimization approach

O. Nejadseyfi, H. J. M. Geijselaers, E. H. Atzema, M. Abspoel, A. H. van den Boogaard

13-05-2020 | Original Research | Issue 3/2020

Constitutive behavior and hot workability of multi-direction forged T2 copper during hot compression deformation

Hongming Zhang, Jing Wang, Guobin Liu, Gang Chen, Fei Han

Current Publications

Premium Partners

    Image Credits