Skip to main content
main-content
Top

Journal

International Journal of Material Forming

International Journal of Material Forming 6/2019

Issue 6/2019

Table of Contents ( 10 Articles )

12-12-2018 | Original Research | Issue 6/2019

Forming rectangular tubes into complicated 3D shapes by combining three-roll push bending, twisting and rotary draw bending: the role of the fabrication loading history on the mechanical response

S. Ancellotti, V. Fontanari, S. Slaghenaufi, E. Cortelletti, M. Benedetti

12-12-2018 | Original Research | Issue 6/2019

Rapid manufacturing of woven comingled flax/polypropylene composite structures

Imed Derbali, Svetlana Terekhina, Laurent Guillaumat, Pierre Ouagne

08-01-2019 | Original Research | Issue 6/2019

Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion

Nitin Chandola, Oana Cazacu, Benoit Revil-Baudard

02-01-2019 | Original Research | Issue 6/2019 Open Access

Flow curves up to high strains considering load reversal and damage

Oliver Hering, Felix Kolpak, A. Erman Tekkaya

10-01-2019 | Original Research | Issue 6/2019

New approach for the optimization of pass-schedules in open-die forging

Martin Wolfgarten, Dirk Rosenstock, Fridtjof Rudolph, Gerhard Hirt

28-01-2019 | Original Research | Issue 6/2019

3D FEM-DEM coupling analysis for granular-media-based thin-wall elbow tube push-bending process

Hai Liu, Shi-Hong Zhang, Hong-Wu Song, Gao-Lian Shi, Ming Cheng

29-03-2019 | Original Research | Issue 6/2019

Two-way approach for deformation analysis of non-crimp fabrics in uniaxial bias extension tests based on pure and simple shear assumption

Jean Pourtier, Boris Duchamp, Maxime Kowalski, Peng Wang, Xavier Legrand, Damien Soulat

28-10-2019 | Original Research | Issue 6/2019

Development of bio-based poly(butylene succinate) formulations for microcellular injection foaming

Nazim Ykhlef, Eric Lafranche

18-12-2018 | Review | Issue 6/2019

Specific features of flax fibres used to manufacture composite materials

Christophe Baley, Moussa Gomina, Joel Breard, Alain Bourmaud, Sylvain Drapier, Manuela Ferreira, Antoine Le Duigou, Pierre Jacques Liotier, Pierre Ouagne, Damien Soulat, Peter Davies

30-07-2019 | Review | Issue 6/2019

On the inverse identification of Lankford coefficients using geometrical changes under quasi-biaxial loading

Matthias Graser, Matthias Lenzen, Marion Merklein

Current Publications

Premium Partners

    Image Credits