Issue 9/2024
Content (44 Articles)
Self-healing materials: fabrication technique and applications—a critical review
- Review
Nitin Kumar Gupta, Vivek Srivastava, Nalin Somani
Optimisation of the swinging jaw design for a single toggle jaw crusher using finite element analysis
- Original Paper
Martin Murithi, James N. Keraita, Japheth Oirere Obiko, Fredrick Madaraka Mwema, Job Maveke Wambua, Tien-Chien Jen
Physio-mechanical characterization of kenaf/saw dust reinforced polymer matrix composite and selection of optimal configuration using MADM-VIKOR approach
- Original Paper
S. Chandrika, T. R. Hemantha Kumar, Vishwas Mahesh
Multiscale RVE modeling for assessing effective elastic modulus of HDPE based polymer matrix nanocomposite reinforced with nanodiamond
- Original Paper
Santosh Kumar Sahu, P. S. Rama Sreekanth
Box–Behnken based investigation of surface quality and tool wear rate and FEM analysis of tool wear in TiAlN/CrN coated carbide tool
- Original Paper
Lokeswar Patnaik, Sunil Kumar, Jatin Gajjar, Priyadarshini Dash, Saikat Ranjan Maity, Magdalena Łępicka, P. Booma Devi
Development and assessment of African star seed (Chrysophyllum albidum) oil-based cutting fluid in turning AA6061 using Taguchi grey relational approach
- Original Paper
Omolayo M. Ikumapayi, Rasaq A. Kazeem, Lekan T. Popoola, Opeyeolu T. Laseinde, Sunday A. Afolalu, Nnamdi C. Nwala, Stephen A. Akinlabi, Esther T. Akinlabi
Computational modeling of an exponential functionally graded material (EFGM) beam
- Original Paper
Pankaj Sharma, Ujala Prajapati, Ashish Khinchi
Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis
- Original Paper
Harinadh Vemanaboina, Suresh Akella, Ramesh Kumar Buddu, Balram Yelamasetti, Mohan Babu Matam, Karrar Hazim Salem, Kuldeep K. Saxena, Chander Prakash, Dharam Buddhi
Comparative analysis of the behavior of Bi-Directional Functionally Graded Beams: Numerical and Parametric study
- Original Paper
Pankaj Sharma, Ashish Khinchi
Stretch flangeability analysis of heat treated dual phase steel alloy sheet
- Original Paper
Praveen Kumar Gandla, Sandeep Pandre, Vamshi Sammeta, Satyanarayana Kosaraju
Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy
- Original Paper
Muni Tanuja Anantha, Tanya Buddi, Nageswara Rao Boggarapu
Finite element modeling of two-directional FGM beams under hygrothermal effect
- Original Paper
Pankaj Sharma, Ashish Khinchi
Numerical comparison of advanced high strength steels forming limit curve using Banabic and Nakazima tests
- Original Paper
Roberto Matheus De Araujo Bornancin, Chetan P Nikhare, Paulo Victor Prestes Marcondes
Optimization of mechanical properties of bamboo fiber reinforced epoxy hybrid nano composites by response surface methodology
- Open Access
- Original Paper
Roopesh Kumar, Abhijeet Ganguly, Rajesh Purohit
A numerical investigation on material removal mechanism of electro discharge machining of non-conductive ceramics
- Original Paper
Amin Razeghiyadaki, Carlo Molardi, Didier Talamona, Muhammad Pervej Jahan, Asma Perveen
Influence of axial thermal variation on modal behavior of axially functionally graded material beam
- Original Paper
Rahul Singh, Pankaj Sharma
Integrated fuzzy AHP and fuzzy TOPSIS for multi response optimization in incremental forming process
- Original Paper
Pankaj Wankhede, Mantrala Venkata Kalyan Ram, Kurra Suresh, Amrita Priyadarshini
Implementation of Box–Behnken design to study the factors interaction impacts and modelling of the surface roughness of AL 6063 alloys during turning operations
- Original Paper
Imhade P. Okokpujie, Lagouge K. Tartibu, Kennedy Okokpujie
Hall–Petch and Hollomon modeling for microalloyed 2219Al alloys under different thermo-mechanical treatments
- Original Paper
Sanjib Gogoi, Harun Rashid Siddiqui, Sanjib Banerjee, Satadru Kashyap, Sushen Kirtania, Rakesh Bhadra
Prediction of thermophysical properties of hybrid nanofluids using machine learning algorithms
- Original Paper
S. Bhanuteja, V. Srinivas, Ch. V. K. N. S. N. Moorthy, S. Jai Kumar, B. Lakshmipathi Lakshmipathi Raju
Consequences of the rotational speed and profile of tool pin in microstructure and mechanical properties of AA8011/ZrO2 composite produced by FSW
- Original Paper
Srinivas Naik Lonavath, Hadya Boda
Using semantic Geometric Dimensioning and Tolerancing (GD &T) information from STEP AP242 neutral exchange files for robotic applications
- Open Access
- Original Paper
Shafi Khurieshi Mohammed, Mathias Hauan Arbo, Lars Tingelstad
Numerical investigation of forces and acceleration for air-sea unmanned aerial vehicle in transition
- Original Paper
Emmanuel C. Chukwuemeka, Forrest Ames, Rasaq A. Kazeem, Moses O. Petinrin, Omolayo M. Ikumapayi, Esther T. Akinlabi
A comparative study of machine learning algorithms in the prediction of bead geometry in wire-arc additive manufacturing
- Original Paper
Mukesh Chandra, K. E. K. Vimal, Sonu Rajak
Optimization and numerical analysis of friction stir welding parameters of AA7075-T651 and AA 1200-H19 using tapered tool
- Original Paper
Benjamin I. Attah, Sunday A. Lawal, Katsina C. Bala, Omolayo M. Ikumapayi, Oyewole Adedipe, Raju P. Mahto, Esther T. Akinlabi
Artifical intelligence inspired approach to numerically investigate chip morphology in machining AISI630
- Original Paper
Shafahat Ali, Assem Alshibi, Abdelrahman Nasreldin, Salman Pervaiz
Optimization using genetic algorithm of GMAW parameters for Charpy impact test of 080M40 steel
- Original Paper
Yogesh Dubey, Pankaj Sharma, Mahendra Pratap Singh
Simplified optimal design of NU202 cylindrical roller bearing and validation through GA
- Original Paper
Sireesha Koneru, A. Srinath, Boggarapu Nageswara Rao, Tanya Buddi
Modeling and optimization of bead geometry and hardness of bead on plate TIG welds of Stainless Steel SS202
- Original Paper
Anand Baghel, Chaitanya Sharma, Manvandra Kumar Singh, Vikas Upadhyay
Optimization of process parameters for autogenous TIG welding of austenitic stainless-steel SS-304
- Original Paper
Anand Baghel, Chaitanya Sharma, Vikas Upadhyay, Rajat singh
Optimization of TIG welding process parameters on chrome alloy steel using Box–Behnken method
- Original Paper
Bhiksha Gugulothu, Srikanth Karumuri, S. Vijayakumar, B. Muthuvel, Suresh Seetharaman, S. Jeyakrishnan, Kuldeep K. Saxena
Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron
- Original Paper
S. Karthik, B. N. Sharath, P. Madhu, K. S. Madhu, B. G. Prem Kumar, Akarsh Verma
Investigating the influence of single and multicomponent activated fluxes on macrostructure, microstructure, and hardness of ATIG welded SS304
- Original Paper
Anand Baghel, Chaitanya Sharma, Vikas Upadhyay, Rajat singh
The influence of material stiffness and damping on machining stability in boring tool–workpiece systems using finite element simulation to implement digital twin
- Original Article
Saravanamurugan Sundaram, Fawas Puthenveetil, Viswajith S. Nair, Rameshkumar Krishnaswamy
Identification of residual stress intensity and its variation with heat source moving time in AISI304 steel pipe weldment: a significant failure investigation for structural integrity
- Original Article
Pavan Meena, Ramkishor Anant
Failure mode and effects analysis of suction hose manufacturing industry: a case study of automobiles
- Original Article
Ahsan Razzaq, Tauseef Aized, Muhammad Faizan Ameer, Sami Ullah Khan, M. Ijaz Khan, Barno Sayfutdinovna Abdullaeva
Coupled thermomechanical FE analysis of multi-pass welding in thick pipe
- Original Article
Ashish Pathak, Sandeep Jaiswal, Chandra Pal Singh, Gajendra Kumar Nhaichaniya
An investigation of the effect of auxiliary pins on mechanical properties of friction stir welded AA2024-T351
- Original Article
Amir Ghiasvand, Soran Hassanifard, Mohammad Zehsaz, John William Grimaldo Guerrero, Hesamoddin A. Derazkola
Newly applied practices to alleviate design uncertainty: a case study of a design scheme based on the DEMATEL–ANP–VIKOR theory
- Original Article
Zhiyuan Wang, Cong Sun
Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis
- Original Article
Ipsit Mishra, Rajeev Srivastava
Correction: Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis
- Correction
Ipsit Mishra, Rajeev Srivastava
Correction: Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis
- Correction
Ipsit Mishra, Rajeev Srivastava
Finite element simulation of additive manufacturing process of carbon allotropes
- Technical Paper
Kautilya S. Patel, Susmita D. Solanki, Dhaval B. Shah, S. J. Joshi, K. M. Patel
Effect of different tool pin geometries on force, torque, microstructure and mechanical properties of friction stir welded acrylonitrile butadiene styrene and polycarbonate joints
- Technical Article
Sudhir Kumar, Barnik Saha Roy
