Top

Published in:

2021 | OriginalPaper | Chapter

1. Introduction to Cold Spray Additive Manufacturing

Authors : Shuo Yin, Rocco Lupoi

Published in: Cold Spray Additive Manufacturing

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cold spray is a solid-state coating deposition technology which has recently been applied as an additive manufacturing process to fabricate individual components and to repair damaged components. In comparison with fusion-based high-temperature additive manufacturing processes, cold spray additive manufacturing (CSAM) has shown to retain the original properties of the feedstock, to produce oxide-free deposits, and to not adversely influence underlying substrate materials during manufacture. Therefore, CSAM is attracting considerable attention from both scientific and industrial communities. Although CSAM is an emerging additive manufacturing technology, a body of work has been carried out by the authors’ and other research groups worldwide, and the technology has been applied across a range of manufacturing areas. This chapter aims to provide a brief introduction of CSAM and acts as a start of this book.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

next chapter Gas Flow, Particle Acceleration and Heat Transfer in Cold Spray Additive Manufacturing

Alkhimov, A.P., Kosarev, V.F., Nesterovich, N.I., Papyrin., A.N.: Method of applying coatings (SU 1618778) (1980)

Alkhimov, A.P., Kosareve, V.F., Papyrin, A.N.: A method of cold gas-dynamic spray deposition. Dokl. Akad. Nauk SSSR. 315, 1062–1065 (1990)

Assadi, H., Kreye, H., Gärtner, F., Klassen, T.: Cold spraying—a materials perspective. Acta Mater. 116, 382–407 (2016). https://doi.org/10.1016/j.actamat.2016.06.034CrossRef

Raoelison, R.N., Xie, Y., Sapanathan, T., Planche, M.P., Kromer, R., Costil, S., Langlade, C.: Cold gas dynamic spray technology: a comprehensive review of processing conditions for various technological developments till to date. Addit. Manuf. 19, 134–159 (2018)

Rokni, M.R., Nutt, S.R., Widener, C.A., Champagne, V.K., Hrabe, R.H.: Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray. J. Therm. Spray Technol. 1–48 (2017). https://doi.org/https://doi.org/10.1007/s11666-017-0575-0

Hassani-Gangaraj, M., Veysset, D., Nelson, K.A., Schuh, C.: In-situ observations of single micro-particle impact bonding. Scr. Mater. 145, 9–13 (2018). https://doi.org/10.1016/j.scriptamat.2017.09.042CrossRef

Meng, F., Yue, S., Song, J.: Quantitative prediction of critical velocity and deposition efficiency in cold-spray: a finite-element study. Scr. Mater. 107, 83–87 (2015). https://doi.org/10.1016/j.scriptamat.2015.05.026CrossRef

Assadi, H., Gärtner, F., Stoltenhoff, T., Kreye, H.: Bonding mechanism in cold gas spraying. Acta Mater. 51, 4379–4394 (2003). https://doi.org/10.1016/S1359-6454(03)00274-XCrossRef

Raletz, F.F., Vardelle, M., Ezo’o, G.: Critical particle velocity under cold spray conditions. Surf. Coatings Technol. 201, 1942–1947 (2006). https://doi.org/10.1016/j.surfcoat.2006.04.061CrossRef

10.

Hassani-Gangaraj, M., Veysset, D., Nelson, K.A., Schuh, C.A.: Melting can hinder impact-induced adhesion. Phys. Rev. Lett. 119, 175701 (2017). https://doi.org/10.1103/PhysRevLett.119.175701CrossRef

11.

Grujicic, M., Zhao, C.L.C., DeRosset, W.S.W., Helfritch, D.: Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process. Mater. Des. 25, 681–688 (2004). https://doi.org/10.1016/j.matdes.2004.03.008CrossRef

12.

Assadi, H., Schmidt, T., Richter, H., Kliemann, J.O., Binder, K., Gärtner, F., Klassen, T., Kreye, H.: On parameter selection in cold spraying. J. Therm. Spray Technol. 20, 1161–1176 (2011). https://doi.org/10.1007/s11666-011-9662-9CrossRef

13.

Schmidt, T., Gärtner, F., Assadi, H., Kreye, H.: Development of a generalized parameter window for cold spray deposition. Acta Mater. 54, 729–742 (2006). https://doi.org/10.1016/j.actamat.2005.10.005CrossRef

14.

Bae, G., Kumar, S., Yoon, S., Kang, K., Na, H., Kim, H.J., Lee, C.: Bonding features and associated mechanisms in kinetic sprayed titanium coatings. Acta Mater. 57, 5654–5666 (2009). https://doi.org/10.1016/j.actamat.2009.07.061CrossRef

15.

Yin, S., Wang, X., Suo, X., Liao, H., Guo, Z., Li, W., Coddet, C.: Deposition behavior of thermally softened copper particles in cold spraying. Acta Mater. 61, 5105–5118 (2013). https://doi.org/10.1016/j.actamat.2013.04.041CrossRef

16.

Yin, S., Meyer, M., Li, W., Liao, H., Lupoi, R.: Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A review. J. Therm. Spray Technol. 25, 1–23 (2016). https://doi.org/10.1007/s11666-016-0406-8CrossRef

17.

Villafuerte, J.: Current and future applications of cold spray technology. Met. Finish. 108, 37–39 (2010)CrossRef

18.

Kashirin, A., Klyuev, O., Buzdygar, T., Shkodkin, A.: Modern applications of the low pressure cold spray. In: Proceedings of the 2011 International Thermal Spray Conference. , Hamburg (2011)

19.

Champagne, V., Helfritch, D.: The unique abilities of cold spray deposition. Int. Mater. Rev. 6608, 1–19 (2016). https://doi.org/10.1080/09506608.2016.1194948CrossRef

20.

Vilardell, A.M., Cinca, N., Concustell, A., Dosta, S., Cano, I.G., Guilemany, J.M.: Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art. J. Mater. Sci. 4441–4462 (2015). https://doi.org/https://doi.org/10.1007/s10853-015-9013-1

21.

Champagne, V.K., Helfritch, D.J.: Mainstreaming cold spray—push for applications. Surf. Eng. 30, 396–403 (2014). https://doi.org/10.1179/1743294414Y.0000000277CrossRef

22.

Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., Lupoi, R.: Solid-state additive manufacturing and repairing by cold spraying: a review. J. Mater. Sci. Technol. 34, 440–457 (2018). https://doi.org/10.1016/j.jmst.2017.09.015CrossRef

23.

Yin, S., Aldwell, B., Lupoi, R.: Cold spray additive manufacture and component restoration. 195–224 (2018)

24.

Herzog, D., Seyda, V., Wycisk, E., Emmelmann, C.: Additive manufacturing of metals. Acta Mater. 117, 371–392 (2016). https://doi.org/10.1016/j.actamat.2016.07.019CrossRef

25.

Debroy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-heid, A., De, A., Zhang, W.: Additive manufacturing of metallic components—process, structure and properties. Prog. Mater. Sci. 92, 112–224 (2017). https://doi.org/10.1016/J.PMATSCI.2017.10.001CrossRef

26.

Lead, T., Boston, C.: Cold spray metallization technology focus area status fred lancaster NAVAIR cold spray (2017)

Title: Introduction to Cold Spray Additive Manufacturing
Authors: Shuo Yin
Rocco Lupoi
Publisher: Springer International Publishing
Book: Cold Spray Additive Manufacturing
Print ISBN: 978-3-030-73366-7

Electronic ISBN: 978-3-030-73367-4

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-3-030-73367-4_1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners