Skip to main content
Top
Published in:
Cover of the book

2018 | Supplement | Chapter

Introduction to Reinforcing Potential of Various Clay and Monomers Dispersed Wood Nanocomposites’

Authors : M. R. Rahman, J. C. H. Lai

Published in: Wood Polymer Nanocomposites

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this chapter, various clay and monomer were introduce to produce high strength wood polymer nanocomposites and discussed how they play important role on nonocomposites to enhance their properties. Low-quality wood can be modified through suitable chemical treatments to improve the physical, mechanical, and thermal properties to meet specific end-use requirements. The in situ polymerization is one of the most popular technique to modified and produce wood polymer nanocomposites. Some common chemical treatments have proven to be effective in improving wood hardness, dimensional stability, stiffness, fire resistance, UV resistance, biological resistance, and aesthetic appeal. Due the further improvement, dual monomer mixture along with reinforcing filler was significant improve the physical, mechanical, thermal, hardness, dimensional stability, stiffness, fire resistance, UV resistance, and biological resistance. The various monomers were used, namely styrene, methyl methacrylate, phenol formaldehyde, phenolic resins, urea formaldehyde, and melamine formaldehyde. However, monomer impregnation and chemical modification were also investigated using new chemical formulations in the present study.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference Ayer SW, Fell D, Wan H (2003) Hardening of solid wood: Market opportunities and review of existing technologies. Forintek Canada Corp, Canada Ayer SW, Fell D, Wan H (2003) Hardening of solid wood: Market opportunities and review of existing technologies. Forintek Canada Corp, Canada
go back to reference Baki H, Yalcin Ors M, Hakki A (1993) Improvement of wood properties by impregnation with macromonomeric initiators. J Appl Polym Sci 47:1097–1103CrossRef Baki H, Yalcin Ors M, Hakki A (1993) Improvement of wood properties by impregnation with macromonomeric initiators. J Appl Polym Sci 47:1097–1103CrossRef
go back to reference Baysal E, Yalinkilic MK, Altinok M, Huseyin Peker AS, Colak M (2007) Some physical, biological, mechanical and fire properties of wood polymer composite (WPC) pretreated with boric and borax mixture. Const Build Mater 21(9):1879–1885CrossRef Baysal E, Yalinkilic MK, Altinok M, Huseyin Peker AS, Colak M (2007) Some physical, biological, mechanical and fire properties of wood polymer composite (WPC) pretreated with boric and borax mixture. Const Build Mater 21(9):1879–1885CrossRef
go back to reference Beall FC, Meyer JA, Skaar C (1966) Direct and RF heat curing of wood-plastic composites. Forest Prod J 16(9):99–106 Beall FC, Meyer JA, Skaar C (1966) Direct and RF heat curing of wood-plastic composites. Forest Prod J 16(9):99–106
go back to reference Beall FC, Witt AE, Bosco LR (1973) Hardness and hardness modulus of wood-polymer composites. Forest Prod J 23(1):55–60 Beall FC, Witt AE, Bosco LR (1973) Hardness and hardness modulus of wood-polymer composites. Forest Prod J 23(1):55–60
go back to reference Blumstein A (1961) Etude de polymerization on couche adsorbee I. Bull Soc Chim Fr 899–905 Blumstein A (1961) Etude de polymerization on couche adsorbee I. Bull Soc Chim Fr 899–905
go back to reference Boding J, Goodman IR (1973) Prediction of elastic parameters for wood. Wood Sci 4:378–385 Boding J, Goodman IR (1973) Prediction of elastic parameters for wood. Wood Sci 4:378–385
go back to reference Bodirlau R, Teaca CA, Spiridon I (2009) Preparation and characterization of composites comprising modified hardwood and wood polymers/poly(vinyl chloride). BioRes 4(4):1285–1304 Bodirlau R, Teaca CA, Spiridon I (2009) Preparation and characterization of composites comprising modified hardwood and wood polymers/poly(vinyl chloride). BioRes 4(4):1285–1304
go back to reference Bongers HPM, Beckers EPJ (2003) Mechanical properties of acetylated solid wood treated on pilot plant scale. In: Van Acker J, Hill CAS (ed). Proceedings of the first European conference on wood modification, Chent, Belgium, 3–4 April 2003 Bongers HPM, Beckers EPJ (2003) Mechanical properties of acetylated solid wood treated on pilot plant scale. In: Van Acker J, Hill CAS (ed). Proceedings of the first European conference on wood modification, Chent, Belgium, 3–4 April 2003
go back to reference Border P, Pollet E, Averous L (2009) Nano-biocomposites: biodegradable polyester/nanoclay system. Prog Polym Sci 34:125–155CrossRef Border P, Pollet E, Averous L (2009) Nano-biocomposites: biodegradable polyester/nanoclay system. Prog Polym Sci 34:125–155CrossRef
go back to reference Bowyer JL, Shmulsky R, Haygreen JG (2007) Hardwood structure: in forest product and wood science an introduction. Blackwell publishing Ltd, United States Bowyer JL, Shmulsky R, Haygreen JG (2007) Hardwood structure: in forest product and wood science an introduction. Blackwell publishing Ltd, United States
go back to reference Brebner KI, Schneider MH, Jones RT (1988) The influence of moisture content on the flexural strength of styrene-polymerized wood. Forest Prod J 38(4):55–58 Brebner KI, Schneider MH, Jones RT (1988) The influence of moisture content on the flexural strength of styrene-polymerized wood. Forest Prod J 38(4):55–58
go back to reference Brebner KI, Schneider MH, St-Pierre LE (1985) Flexural strength of polymer-impregnated eastern white pine. Forest Prod J 35(2):22–27 Brebner KI, Schneider MH, St-Pierre LE (1985) Flexural strength of polymer-impregnated eastern white pine. Forest Prod J 35(2):22–27
go back to reference Brelid PL, Simonson R, Bregman O, Nilsson T (2000) Resistance of acetylated wood to biological degradation. Holz Roh Werkst 58:331–337CrossRef Brelid PL, Simonson R, Bregman O, Nilsson T (2000) Resistance of acetylated wood to biological degradation. Holz Roh Werkst 58:331–337CrossRef
go back to reference Bryant BS (1966) The chemical modification of wood-from the point of view of wood science and economics. Forest Prod J 16(2):20–27 Bryant BS (1966) The chemical modification of wood-from the point of view of wood science and economics. Forest Prod J 16(2):20–27
go back to reference Byun HY, Choi MH, Chung IJ (2001) Synthesis and characterization of resol type phenolic resin/layered silicate nanocomposite. Chem Mater 13:4221–4226CrossRef Byun HY, Choi MH, Chung IJ (2001) Synthesis and characterization of resol type phenolic resin/layered silicate nanocomposite. Chem Mater 13:4221–4226CrossRef
go back to reference Cai X, Riedl B, Zhang SY, Wan H (2007a) Formation and properties of nanocomposites made up from solid aspen wood, melamine-urea—formaldehyde and clay. Holz 61:148–154 Cai X, Riedl B, Zhang SY, Wan H (2007a) Formation and properties of nanocomposites made up from solid aspen wood, melamine-urea—formaldehyde and clay. Holz 61:148–154
go back to reference Cai X, Riedl B, Zhang SY, Wan H (2007b) Effects of nanofillers on water resistance and dimensional stability of solid wood modified by melamine-urea-formaldehyde resin. Wood Fiber Sci 39(2):307–318 Cai X, Riedl B, Zhang SY, Wan H (2007b) Effects of nanofillers on water resistance and dimensional stability of solid wood modified by melamine-urea-formaldehyde resin. Wood Fiber Sci 39(2):307–318
go back to reference Cai X, Riedl B, Zhang SY, Wan H (2008) The impact of interphase between wood, melamine-urea-formaldehyde and layered silicate on the performance of wood polymer nanocomposites. Compos Part A 39:727–737CrossRef Cai X, Riedl B, Zhang SY, Wan H (2008) The impact of interphase between wood, melamine-urea-formaldehyde and layered silicate on the performance of wood polymer nanocomposites. Compos Part A 39:727–737CrossRef
go back to reference Cardias WF, Hale MD (1999) The resistance of wood chemically modified with isocyanates. Part I. Brown rot, white rot and acid chlorite delignification. Holz 53:230–236 Cardias WF, Hale MD (1999) The resistance of wood chemically modified with isocyanates. Part I. Brown rot, white rot and acid chlorite delignification. Holz 53:230–236
go back to reference Caser W (ed) (2007) Hybrid materials: synthesis, characterization, and applications. Wiley-VCH Verlag, Gernany Caser W (ed) (2007) Hybrid materials: synthesis, characterization, and applications. Wiley-VCH Verlag, Gernany
go back to reference Cetin NS, Hill CAS (1999) An investigation of the reaction od epoxides with wood. J Wood Chem Technol 19:247–264CrossRef Cetin NS, Hill CAS (1999) An investigation of the reaction od epoxides with wood. J Wood Chem Technol 19:247–264CrossRef
go back to reference Chao WY, Lee SWC (2003) Properties of southern pine wood impregnated with styrene. Holz 57(3):333–336 Chao WY, Lee SWC (2003) Properties of southern pine wood impregnated with styrene. Holz 57(3):333–336
go back to reference Chauhan SS, Aggarwal P, Karmarkar A, Pandey KK (2001) Moisture adsorption behavior of esterified rubber wood. Holz als Roh- und Werkstoff 59:250–253CrossRef Chauhan SS, Aggarwal P, Karmarkar A, Pandey KK (2001) Moisture adsorption behavior of esterified rubber wood. Holz als Roh- und Werkstoff 59:250–253CrossRef
go back to reference Chen GC, Rowell R (1986) Approaches to the improvement of biological resistance of wood through controlled-release technology. In: Chaudry I (ed) Proceedings of the 13th international symposium on controlled-release of bioactive materials, Norfolk, 3–6 Aug 1986 Chen GC, Rowell R (1986) Approaches to the improvement of biological resistance of wood through controlled-release technology. In: Chaudry I (ed) Proceedings of the 13th international symposium on controlled-release of bioactive materials, Norfolk, 3–6 Aug 1986
go back to reference Collier JR, Fahrurrozi M, Collier BJ (1996) Cellulosic reinforcement in reactive composite system. J Appl Polym Sci 61:1423–1430CrossRef Collier JR, Fahrurrozi M, Collier BJ (1996) Cellulosic reinforcement in reactive composite system. J Appl Polym Sci 61:1423–1430CrossRef
go back to reference Deka M, Saikia CN (2000) Chemical modification of wood with thermosetting resin: Effect on dimensional stability and strength property. Biores Technol 73:179–181CrossRef Deka M, Saikia CN (2000) Chemical modification of wood with thermosetting resin: Effect on dimensional stability and strength property. Biores Technol 73:179–181CrossRef
go back to reference Deka M, Saikia CN, Baruah KK (2002) Studies on thermal degradation and termit resistant properties of chemically modified wood. Biores Technol 84:151–157CrossRef Deka M, Saikia CN, Baruah KK (2002) Studies on thermal degradation and termit resistant properties of chemically modified wood. Biores Technol 84:151–157CrossRef
go back to reference Devi RR, Maji TK, Banerjee AN (2003) Studies on dimensional stability and thermal properties of rubber wood chemically modified with styrene and glycidyl methacrylate. J Appl Polym Sci 93:1938–1945CrossRef Devi RR, Maji TK, Banerjee AN (2003) Studies on dimensional stability and thermal properties of rubber wood chemically modified with styrene and glycidyl methacrylate. J Appl Polym Sci 93:1938–1945CrossRef
go back to reference Du WL, Xu YL, Xu ZR, Fan CL (2008) Preparation, characterization and antibacterial properties E. coli K88 of chitosan nanoparticle loaded copper ions. Nanotechnol 19:1–5 Du WL, Xu YL, Xu ZR, Fan CL (2008) Preparation, characterization and antibacterial properties E. coli K88 of chitosan nanoparticle loaded copper ions. Nanotechnol 19:1–5
go back to reference Duran JA, Meyer JA (1972) Exothermic heat released during catalytic polymerization of basswood-methyl methacrylate composites. Wood Sci Technol 6:59–66CrossRef Duran JA, Meyer JA (1972) Exothermic heat released during catalytic polymerization of basswood-methyl methacrylate composites. Wood Sci Technol 6:59–66CrossRef
go back to reference Ellis WD, O’Dell JL (1999) Wood-polymer composites made with acrylic monomers, isocyanate and maleic anhydride. J Appl Polym Sci 73:2493–2505CrossRef Ellis WD, O’Dell JL (1999) Wood-polymer composites made with acrylic monomers, isocyanate and maleic anhydride. J Appl Polym Sci 73:2493–2505CrossRef
go back to reference Ellwood EL, Gilmore RC, Stamm AJ (1972) Dimensional stabilization of wood with vinyl monomers. Wood Sci 4(3):137–141 Ellwood EL, Gilmore RC, Stamm AJ (1972) Dimensional stabilization of wood with vinyl monomers. Wood Sci 4(3):137–141
go back to reference Elvy SB, Dennis GR, Loo-teck NG (1995) Effect of coupling agent on the physical properties of wood-polymer composites. J Mater Process Technol 48:365–372CrossRef Elvy SB, Dennis GR, Loo-teck NG (1995) Effect of coupling agent on the physical properties of wood-polymer composites. J Mater Process Technol 48:365–372CrossRef
go back to reference Favaro SL, Lopes MS, Neto AGVC, Santana RRR, Dovanovic E (2010) Chemical, morphological and mechanical analysis of rice husk/post—customer polyethylene composites. Comp Part A 41(1):154–160CrossRef Favaro SL, Lopes MS, Neto AGVC, Santana RRR, Dovanovic E (2010) Chemical, morphological and mechanical analysis of rice husk/post—customer polyethylene composites. Comp Part A 41(1):154–160CrossRef
go back to reference Feist WC, Rowell RM, Ellis DW (1991) Moisture sorption and accelerated weathering of acetylated and methacrylated aspen. Wood Fiber Sci 23(1):128–136 Feist WC, Rowell RM, Ellis DW (1991) Moisture sorption and accelerated weathering of acetylated and methacrylated aspen. Wood Fiber Sci 23(1):128–136
go back to reference Forest Products Laboratory (2002) Appearance application for BC coastal hemlock and Douglas-fir: a market fit analysis. PFInnovations, Canada Forest Products Laboratory (2002) Appearance application for BC coastal hemlock and Douglas-fir: a market fit analysis. PFInnovations, Canada
go back to reference Frazier CE (2003) Isocyanate wood binders. In: Pizzi A, Mittal KL (eds) Handbooks of adhesive technology, 2nd edn. Marcel Dekker, New York, pp 63–135 Frazier CE (2003) Isocyanate wood binders. In: Pizzi A, Mittal KL (eds) Handbooks of adhesive technology, 2nd edn. Marcel Dekker, New York, pp 63–135
go back to reference Frihart CR (2005) Wood adhesion and adhesives. In: Rowell RM (ed) Handbook of Wood chemistry and wood composite. CRC Press, United Kingdom, pp 215–278 Frihart CR (2005) Wood adhesion and adhesives. In: Rowell RM (ed) Handbook of Wood chemistry and wood composite. CRC Press, United Kingdom, pp 215–278
go back to reference Furuno T, Goto T (1973) The penetration of MMA monomer into the woody cell wall. Mokuzai Gakkashi 19(6):271–274 Furuno T, Goto T (1973) The penetration of MMA monomer into the woody cell wall. Mokuzai Gakkashi 19(6):271–274
go back to reference Furuno T, Shimada K, Uehara T, Jodai S (1992a) Combinations of wood and silicate II. Wood-mineral composites using water glass and reactants of barium chloride, boric acid and borax, and their properties. Mokuzai Gakkashi 38(5):448–457 Furuno T, Shimada K, Uehara T, Jodai S (1992a) Combinations of wood and silicate II. Wood-mineral composites using water glass and reactants of barium chloride, boric acid and borax, and their properties. Mokuzai Gakkashi 38(5):448–457
go back to reference Furuno T, Uehara T, Jodai S (1991) Combinations of wood and silicates I. Impregnation by water glass and applications of aluminum sulfate and calcium chloride as reactants. Mokuzai Gakkashi 37(5):462–472 Furuno T, Uehara T, Jodai S (1991) Combinations of wood and silicates I. Impregnation by water glass and applications of aluminum sulfate and calcium chloride as reactants. Mokuzai Gakkashi 37(5):462–472
go back to reference Furuno T, Uehara T, Jodai S (1992b) The role of wall polymer in the decay durabilities of wood-polymer composites. Mokuzai Gakkashi 38(3):285–293 Furuno T, Uehara T, Jodai S (1992b) The role of wall polymer in the decay durabilities of wood-polymer composites. Mokuzai Gakkashi 38(3):285–293
go back to reference Furuno T, Uehara T, Jodai S (1993) Combinations of wood and silicate III. Some properties of wood-mineral composites using the water glass-boron compound system. Mokuzai Gakkashi 39(5):561–570 Furuno T, Uehara T, Jodai S (1993) Combinations of wood and silicate III. Some properties of wood-mineral composites using the water glass-boron compound system. Mokuzai Gakkashi 39(5):561–570
go back to reference Galperin AS, Kuleshov GG, Tarashkevich VI, Smtov GM (1995) Manufacturing and properties of modified wood dimensional stability. Wood Sci Technol 18:225–240 Galperin AS, Kuleshov GG, Tarashkevich VI, Smtov GM (1995) Manufacturing and properties of modified wood dimensional stability. Wood Sci Technol 18:225–240
go back to reference Gao Z, Gu J (2007) CN 1944009 A, 11 Apr 2007 Gao Z, Gu J (2007) CN 1944009 A, 11 Apr 2007
go back to reference Gaylord NG (1973) US 3765934 A, 16 Oct 1973 Gaylord NG (1973) US 3765934 A, 16 Oct 1973
go back to reference George J, Sreekala MS, Thomas S (2001) A review on interface modification and characterization of natural fiber reinforced plastic composites. Polym Eng Sci 41(9):1471–1556CrossRef George J, Sreekala MS, Thomas S (2001) A review on interface modification and characterization of natural fiber reinforced plastic composites. Polym Eng Sci 41(9):1471–1556CrossRef
go back to reference Georgieva M, Harata M, Miloshev G (2008) The nuclear actin-related protein Act3p/Arp4 influences yeast cell shape and bulk chromatin organization. J Cell Biochem 104(1):59–67CrossRef Georgieva M, Harata M, Miloshev G (2008) The nuclear actin-related protein Act3p/Arp4 influences yeast cell shape and bulk chromatin organization. J Cell Biochem 104(1):59–67CrossRef
go back to reference Ghosh A, Shuman S, Lima CD (2008) The structure of FCP1, an essential RNA polymerase II CTD phosphatase. Mol Cell 32(4):478–490CrossRef Ghosh A, Shuman S, Lima CD (2008) The structure of FCP1, an essential RNA polymerase II CTD phosphatase. Mol Cell 32(4):478–490CrossRef
go back to reference Gilman JW (1999) Flammability and thermal stability studies of polymer layered silicate (clay) nanocomposites. Appl Clay Sci 15:31–49CrossRef Gilman JW (1999) Flammability and thermal stability studies of polymer layered silicate (clay) nanocomposites. Appl Clay Sci 15:31–49CrossRef
go back to reference Gindl W, Dessipri E, Wimmer R (2002) Using UV-microscopy to study diffusion of melamine-urea-formaldehyde resin in the cell walls of spruce wood. Holz 56:103–107 Gindl W, Dessipri E, Wimmer R (2002) Using UV-microscopy to study diffusion of melamine-urea-formaldehyde resin in the cell walls of spruce wood. Holz 56:103–107
go back to reference Gindl W, Gupta HS (2002) Cell-wall hardness and Young’s modulus of melamine-modified spruce wood by nano-indentation. Compos Part A 33:1141–1145CrossRef Gindl W, Gupta HS (2002) Cell-wall hardness and Young’s modulus of melamine-modified spruce wood by nano-indentation. Compos Part A 33:1141–1145CrossRef
go back to reference Gindl W, Zargar-Yaghubi F, Wimmer R (2003) Impregnation of softwood cell walls with melamine-formaldehyde resin. Biores Technol 87:325–330CrossRef Gindl W, Zargar-Yaghubi F, Wimmer R (2003) Impregnation of softwood cell walls with melamine-formaldehyde resin. Biores Technol 87:325–330CrossRef
go back to reference Goldstein IS, Dreher WA, JEroski EB, Nielson JF, Oberley WJ, Weaver JW (1959) Wood processing; inhibiting against swelling and decay. Ind Eng Chem 51(10):1313–1317 Goldstein IS, Dreher WA, JEroski EB, Nielson JF, Oberley WJ, Weaver JW (1959) Wood processing; inhibiting against swelling and decay. Ind Eng Chem 51(10):1313–1317
go back to reference Halabe UB, Bidigalu GM, Ganga Rao HVS, Ross RJ (1995) Nondestructive evaluation of green wood using stress wave and transverse vibration techniques. Mater Eval 55(9):1013–1018 Halabe UB, Bidigalu GM, Ganga Rao HVS, Ross RJ (1995) Nondestructive evaluation of green wood using stress wave and transverse vibration techniques. Mater Eval 55(9):1013–1018
go back to reference Hamdan S, Sedik Y, Jusoh I, Hasan M, Talib ZA (2009) Dynamic Young’s modulus and glass transition temperature of selected tropical wood species. Mater Sci Technol 25(6):805–808CrossRef Hamdan S, Sedik Y, Jusoh I, Hasan M, Talib ZA (2009) Dynamic Young’s modulus and glass transition temperature of selected tropical wood species. Mater Sci Technol 25(6):805–808CrossRef
go back to reference Hamdan S, Talib ZA, Rahman MR, Ahmed AS, Islam MS (2010) Dynamic Young’s modulus measurement of treated and post-treated tropical wood polymer composites (WPC). BioRes 5(1):324–342 Hamdan S, Talib ZA, Rahman MR, Ahmed AS, Islam MS (2010) Dynamic Young’s modulus measurement of treated and post-treated tropical wood polymer composites (WPC). BioRes 5(1):324–342
go back to reference Haque MM, Hasan M, Islam MS, Ali ME (2009) Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites. Biores Technol 100:4903–4906CrossRef Haque MM, Hasan M, Islam MS, Ali ME (2009) Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites. Biores Technol 100:4903–4906CrossRef
go back to reference Haque MM, Islam MS, Islam MDS, Islam MN, Huque MDM, Hasan M (2010) Physico-mechanical properties of chemically treated palm fiber reinforced polypropylene composites. J Reinf Plast Comp 29(11):1734–1742CrossRef Haque MM, Islam MS, Islam MDS, Islam MN, Huque MDM, Hasan M (2010) Physico-mechanical properties of chemically treated palm fiber reinforced polypropylene composites. J Reinf Plast Comp 29(11):1734–1742CrossRef
go back to reference Hartley ID, Schneider MH (1993) Water vapour diffusion and absorption characteristics of sugar maple (Acer saccharum, Marsh.), wood polymer composites. Wood Sci Technol 27:421–427CrossRef Hartley ID, Schneider MH (1993) Water vapour diffusion and absorption characteristics of sugar maple (Acer saccharum, Marsh.), wood polymer composites. Wood Sci Technol 27:421–427CrossRef
go back to reference Hartman S (1969) Modified wood with aqueous polyurethane systems. Forest Prod J 19(5):39–42 Hartman S (1969) Modified wood with aqueous polyurethane systems. Forest Prod J 19(5):39–42
go back to reference Hill CAS (2006) Modifying the properties of wood. In Hill CAS (ed) Wood modification: chemical, thermal and other processes. Wiley, United Kingdom Hill CAS (2006) Modifying the properties of wood. In Hill CAS (ed) Wood modification: chemical, thermal and other processes. Wiley, United Kingdom
go back to reference Hill CAS (2011) Wood modification: An update. BioRes 6(2):918–919 Hill CAS (2011) Wood modification: An update. BioRes 6(2):918–919
go back to reference Holyle RJ, Woeste FE (1989) Wood technology in the design of structure. IOWA State University Press, United States of America Holyle RJ, Woeste FE (1989) Wood technology in the design of structure. IOWA State University Press, United States of America
go back to reference Hon DNS, Shiraishi N (2001) Cellulosic chemistry, 2nd edn. Marcel Dekker Inc., New York, pp 443–501 Hon DNS, Shiraishi N (2001) Cellulosic chemistry, 2nd edn. Marcel Dekker Inc., New York, pp 443–501
go back to reference Ibach RE, Rowell RM, Lange SE, Schumann RL (2001) Effect of wet-dry cycling on the decay properties of aspen fiber high density polypropylene composites. Paper presented at International conference on wood fiber- plastic composites, Madison, Wisconsin, 15–16 May 2001 Ibach RE, Rowell RM, Lange SE, Schumann RL (2001) Effect of wet-dry cycling on the decay properties of aspen fiber high density polypropylene composites. Paper presented at International conference on wood fiber- plastic composites, Madison, Wisconsin, 15–16 May 2001
go back to reference Inoue M, Ogata S, Kawai S, Rowell RM, Norimoto M (1993) Fixation of compressed wood using melamine-formaldehyde resin. Wood Fiber Sci 25(4):404–410 Inoue M, Ogata S, Kawai S, Rowell RM, Norimoto M (1993) Fixation of compressed wood using melamine-formaldehyde resin. Wood Fiber Sci 25(4):404–410
go back to reference Islam MS, Hamdan S, Jusoh I, Rahman MR, Ahmed AS (2011) The effect of crosslinker on mechanical and morphological properties of tropical wood material composites. Mater Des 32(4):2221–2227CrossRef Islam MS, Hamdan S, Jusoh I, Rahman MR, Ahmed AS (2011) The effect of crosslinker on mechanical and morphological properties of tropical wood material composites. Mater Des 32(4):2221–2227CrossRef
go back to reference Islam MS, Hamdan S, Jusoh I, Rahman MR, Ahmed AS (2012) The effect of alkali pretreatment on mechanical and morphological properties of tropical wood polymer composites. Mater Des 33:419–424CrossRef Islam MS, Hamdan S, Jusoh I, Rahman MR, Ahmed AS (2012) The effect of alkali pretreatment on mechanical and morphological properties of tropical wood polymer composites. Mater Des 33:419–424CrossRef
go back to reference Islam MS, Hamdan S, Rahman MR, Jusoh I, Ibrahim NF (2010) Dynamic Young’s modulus and dimensional stability of Batai tropical wood impregnated with polyvinyl alcohol. J Sci Res 2(2):227–236CrossRef Islam MS, Hamdan S, Rahman MR, Jusoh I, Ibrahim NF (2010) Dynamic Young’s modulus and dimensional stability of Batai tropical wood impregnated with polyvinyl alcohol. J Sci Res 2(2):227–236CrossRef
go back to reference Juneja SC, Hodgins JW (1970) The properties of thermo-catalytically prepared wood polymer composites. Forest Prod J 20(12):24–28 Juneja SC, Hodgins JW (1970) The properties of thermo-catalytically prepared wood polymer composites. Forest Prod J 20(12):24–28
go back to reference Kamden DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz als Roh-Werkstoff 60:1–6CrossRef Kamden DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz als Roh-Werkstoff 60:1–6CrossRef
go back to reference Khan MA, Idriss Ali KM (1992) Effect of urea on the mechanical strength of wood-plastic composites. Rad J Phys Chem 40(1):69–70 Khan MA, Idriss Ali KM (1992) Effect of urea on the mechanical strength of wood-plastic composites. Rad J Phys Chem 40(1):69–70
go back to reference Khan MA, Idriss Ali KM, Ahmad MU (1992) Radiation-induced wood plastic composites under combinations of monomers. J Appl Polym Sci 45:2113–2119CrossRef Khan MA, Idriss Ali KM, Ahmad MU (1992) Radiation-induced wood plastic composites under combinations of monomers. J Appl Polym Sci 45:2113–2119CrossRef
go back to reference Kojima Y, Usuki A, Kawasumi M, Okada A, Kurauchi T, Kamigaito O (1993a) Sorption of water in nylon 6-clay hybrid. J Appl Polym Sci 49:1259–1264CrossRef Kojima Y, Usuki A, Kawasumi M, Okada A, Kurauchi T, Kamigaito O (1993a) Sorption of water in nylon 6-clay hybrid. J Appl Polym Sci 49:1259–1264CrossRef
go back to reference Kojima Y, Usuki A, Kawasumi M, Okada A, Kurauchi T, Kamigaito O (1993b) Mechanical properties of nylon 6-clay hybrid. J Mater Res 8:1185–1189CrossRef Kojima Y, Usuki A, Kawasumi M, Okada A, Kurauchi T, Kamigaito O (1993b) Mechanical properties of nylon 6-clay hybrid. J Mater Res 8:1185–1189CrossRef
go back to reference Kornmann X, Lindberg H, Berglund LA (2001) Synthesis of epoxy-clay nanocomposites: Influence of the nature of the curing agent on structure. Polym 42:4493–4499CrossRef Kornmann X, Lindberg H, Berglund LA (2001) Synthesis of epoxy-clay nanocomposites: Influence of the nature of the curing agent on structure. Polym 42:4493–4499CrossRef
go back to reference Koutsos V (2009) Polymeric materials: An introduction. In: Forde M (ed) ICE manual of construction materials. Thomas Telford, London, pp 571–577 Koutsos V (2009) Polymeric materials: An introduction. In: Forde M (ed) ICE manual of construction materials. Thomas Telford, London, pp 571–577
go back to reference Kumar S (1994) Chemical modification of wood. Wood Fiber Sci 26(2):270–280 Kumar S (1994) Chemical modification of wood. Wood Fiber Sci 26(2):270–280
go back to reference Kyziol L (1999) Modified wood (ligonomer)—a promising material for ship building. Pol Marit Res 2:6–10 Kyziol L (1999) Modified wood (ligonomer)—a promising material for ship building. Pol Marit Res 2:6–10
go back to reference Lan T, Kaviratna PD, Pinnavaia TJ (1995) Mechanism of clay tactoid exfoliation in epoxy-clay nanocomposites. Chem Mater 7:2144–2150CrossRef Lan T, Kaviratna PD, Pinnavaia TJ (1995) Mechanism of clay tactoid exfoliation in epoxy-clay nanocomposites. Chem Mater 7:2144–2150CrossRef
go back to reference Langwig JE, Meyer JA, Davidson RW (1968) Influence of polymer impregnation on mechanical properties of basswood. Forest Prod J 18(7):33–36 Langwig JE, Meyer JA, Davidson RW (1968) Influence of polymer impregnation on mechanical properties of basswood. Forest Prod J 18(7):33–36
go back to reference Langwig JE, Meyer JA, Davidson RW (1969) New monomers used in making wood-plastic. Forest Prod J 19(11):57–61 Langwig JE, Meyer JA, Davidson RW (1969) New monomers used in making wood-plastic. Forest Prod J 19(11):57–61
go back to reference Li JZ, Furuno T, Katoh S (2001) Preparation and properties of acetylated and propionylated wood-silicate composites. Holz 55(1):93–96CrossRef Li JZ, Furuno T, Katoh S (2001) Preparation and properties of acetylated and propionylated wood-silicate composites. Holz 55(1):93–96CrossRef
go back to reference Loos WE, Robinson GL (1968) Rates of swelling of wood in vinyl monomers. Forest Prod J 18(9):109–112 Loos WE, Robinson GL (1968) Rates of swelling of wood in vinyl monomers. Forest Prod J 18(9):109–112
go back to reference Mahltig B, Swaboda Roessler A, Bottcher H (2008) Functionalizing wood by nanosolapplication. J Mater Chem 18:3180–3192CrossRef Mahltig B, Swaboda Roessler A, Bottcher H (2008) Functionalizing wood by nanosolapplication. J Mater Chem 18:3180–3192CrossRef
go back to reference Mathias LJ, Wright JR (1989) New wood-polymer composites: Impregnation and in situ polymerization of hydroxymethylacrylates. Polym Reprints 30(1):233–234 Mathias LJ, Wright JR (1989) New wood-polymer composites: Impregnation and in situ polymerization of hydroxymethylacrylates. Polym Reprints 30(1):233–234
go back to reference Mathias LL, Lee S, Wright JR, Warren SC (1991) Improvement of wood properties by impregnation with multifunctional monomers. J Appl Polym Sci 42:55–67CrossRef Mathias LL, Lee S, Wright JR, Warren SC (1991) Improvement of wood properties by impregnation with multifunctional monomers. J Appl Polym Sci 42:55–67CrossRef
go back to reference Matsuda H (1987) Preparation and utilization of esterified woods bearing carboxyl groups. Wood Sci Technol 21(1):75–88 Matsuda H (1987) Preparation and utilization of esterified woods bearing carboxyl groups. Wood Sci Technol 21(1):75–88
go back to reference Matsunaga M, Sugiyama M, Minato K, Norimoto M (1996) Physical and mechanical properties required for violin bow materials. Holz 50(6):511–517CrossRef Matsunaga M, Sugiyama M, Minato K, Norimoto M (1996) Physical and mechanical properties required for violin bow materials. Holz 50(6):511–517CrossRef
go back to reference Meyer JA (1981) Wood-polymer materials: State of the art. Wood Sci 14(2):49–54 Meyer JA (1981) Wood-polymer materials: State of the art. Wood Sci 14(2):49–54
go back to reference Militz H, Beckers EPJ, Homan WJ (1997) Modification of solid wood: research and practical potential. Paper presented at 28th annual meeting, Vancouver, Canada, 25–30 May Militz H, Beckers EPJ, Homan WJ (1997) Modification of solid wood: research and practical potential. Paper presented at 28th annual meeting, Vancouver, Canada, 25–30 May
go back to reference Minato K, Yusuf S, Imamura Y, Takahashi M (1992) Resistance of formaldehyde-treated wood to biological attacks. Mokuzai Gakkaishi 38:1050–1056 Minato K, Yusuf S, Imamura Y, Takahashi M (1992) Resistance of formaldehyde-treated wood to biological attacks. Mokuzai Gakkaishi 38:1050–1056
go back to reference Miroy F, Eymard P, Pizzi A (1995) Wood hardening by methoxymethyl melamine. HolzRoh Werkst 53:276–278CrossRef Miroy F, Eymard P, Pizzi A (1995) Wood hardening by methoxymethyl melamine. HolzRoh Werkst 53:276–278CrossRef
go back to reference Miyafuji H, Saka S (1997) Fire-resisting properties in several TiO2 wood—inorganic composites and their topochemistry. Wood Sci Technol 31:449–455 Miyafuji H, Saka S (1997) Fire-resisting properties in several TiO2 wood—inorganic composites and their topochemistry. Wood Sci Technol 31:449–455
go back to reference Miyafuji H, Saka S (2001) Na2O–SiO2 wood-inorganic composites prepared by the sol-gel process and their fire-resistant properties. J Wood Sci 47:389–483CrossRef Miyafuji H, Saka S (2001) Na2O–SiO2 wood-inorganic composites prepared by the sol-gel process and their fire-resistant properties. J Wood Sci 47:389–483CrossRef
go back to reference Mohanty AK, Khan MA, Hinrichsen G (2000) Surface modification of jute and its influence on performance of biodegradable jute-fabric/biopol composites. Comp Sci Technol 6:1115–1124CrossRef Mohanty AK, Khan MA, Hinrichsen G (2000) Surface modification of jute and its influence on performance of biodegradable jute-fabric/biopol composites. Comp Sci Technol 6:1115–1124CrossRef
go back to reference Morard M, Vaca-Garcia C, Stevens M, Van Acker J, Pignolet O, Borredon E (2007) Durability improvement of wood by treatment with methyl alkenoate succinic anhydrides (M-ASA) of vegetable origin. Int Biodeter Biodegrad 59:103–110CrossRef Morard M, Vaca-Garcia C, Stevens M, Van Acker J, Pignolet O, Borredon E (2007) Durability improvement of wood by treatment with methyl alkenoate succinic anhydrides (M-ASA) of vegetable origin. Int Biodeter Biodegrad 59:103–110CrossRef
go back to reference Mwaikambo LY, Ansell MP (2000) The effect of chemical treatment on the properties of hemp, sisal, jute and kapok for composite reinforcement. Angew Macromol Chem 272:108–116CrossRef Mwaikambo LY, Ansell MP (2000) The effect of chemical treatment on the properties of hemp, sisal, jute and kapok for composite reinforcement. Angew Macromol Chem 272:108–116CrossRef
go back to reference Nakagami T, Ohta M, Yokota T (1976) Esterification of wood with unsaturated carboxylic acids. III. Dissolution of wood by TFAA esterification method. Bull Kyoto University Forests 48:198–205 Nakagami T, Ohta M, Yokota T (1976) Esterification of wood with unsaturated carboxylic acids. III. Dissolution of wood by TFAA esterification method. Bull Kyoto University Forests 48:198–205
go back to reference Nakagami T, Yokota T (1975) Esterification of wood with unsaturated carboxylic acids. II. Reaction conditions of esterification and properties of the prepared esters of wood. Bull Kyoto University Forests 47:178–183 Nakagami T, Yokota T (1975) Esterification of wood with unsaturated carboxylic acids. II. Reaction conditions of esterification and properties of the prepared esters of wood. Bull Kyoto University Forests 47:178–183
go back to reference Noah JN, Foudjet A (1988) Wood-polymer composites from some tropical hardwoods. Wood Sci Technol 22:115–119CrossRef Noah JN, Foudjet A (1988) Wood-polymer composites from some tropical hardwoods. Wood Sci Technol 22:115–119CrossRef
go back to reference Norimoto M, Gril J, Rowell RM (1992) Rheological properties of chemically modified wood: Relationship between dimensional and creep stability. Wood Fib Sci 24:25–35 Norimoto M, Gril J, Rowell RM (1992) Rheological properties of chemically modified wood: Relationship between dimensional and creep stability. Wood Fib Sci 24:25–35
go back to reference Ogiso K, Saka S (1993) Wood-inorganic composites prepared by sol-gel process II. Effects of ultrasonic treatments on preparation of wood—inorganic composites. Mokuzai Gakkashi 39(3):301–307 Ogiso K, Saka S (1993) Wood-inorganic composites prepared by sol-gel process II. Effects of ultrasonic treatments on preparation of wood—inorganic composites. Mokuzai Gakkashi 39(3):301–307
go back to reference Pandey KK (2005) Study of effect of photo-irridation on the surface chemistry of wood. Polym Degrad Stabil 90:9–20CrossRef Pandey KK (2005) Study of effect of photo-irridation on the surface chemistry of wood. Polym Degrad Stabil 90:9–20CrossRef
go back to reference Pandey KK, Jayashree Nagaveni HC (2009) Study of dimensional stability, decay resistance and light stability of phenylisothiocyanate modified rubberwood. BioRes 4(1):257–267 Pandey KK, Jayashree Nagaveni HC (2009) Study of dimensional stability, decay resistance and light stability of phenylisothiocyanate modified rubberwood. BioRes 4(1):257–267
go back to reference Papadopoulos AN (2006) Decay resistance of cement-bonded oriented strand board. BioRes 1(1):62–66 Papadopoulos AN (2006) Decay resistance of cement-bonded oriented strand board. BioRes 1(1):62–66
go back to reference Prakash GK, Pandey KK, Ram RKD, Mahadevan KM (2006) Dimensional stability and photostability of octanoylated wood. Holz 60:539–542 Prakash GK, Pandey KK, Ram RKD, Mahadevan KM (2006) Dimensional stability and photostability of octanoylated wood. Holz 60:539–542
go back to reference Quilin DT, Caulfield DF, Koutsky JA (1993) Crystallinity in the polypropylene/cellulose system. I. Nucleation and crystallinity morphology. J Appl Polym Sci 50:1187–1194CrossRef Quilin DT, Caulfield DF, Koutsky JA (1993) Crystallinity in the polypropylene/cellulose system. I. Nucleation and crystallinity morphology. J Appl Polym Sci 50:1187–1194CrossRef
go back to reference Qutubuddin S, Fu X, Tajuddin Y (2002) Synthesis of polystyrene-clay nanocomposites via emulsion polymerization using a reactive surfactant. Polym Bull 48(2):143–149CrossRef Qutubuddin S, Fu X, Tajuddin Y (2002) Synthesis of polystyrene-clay nanocomposites via emulsion polymerization using a reactive surfactant. Polym Bull 48(2):143–149CrossRef
go back to reference Raff RAV, Herrick IW, Adams MF (1965) Polymerization of styrene and styrene-divinylbenzene in wood. Forest Prod J 15(7):260–262 Raff RAV, Herrick IW, Adams MF (1965) Polymerization of styrene and styrene-divinylbenzene in wood. Forest Prod J 15(7):260–262
go back to reference Rahman MR, Hamdan S, Ahmed AS, Islam MS (2010) Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW). BioRes 5(2):1022–1035 Rahman MR, Hamdan S, Ahmed AS, Islam MS (2010) Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW). BioRes 5(2):1022–1035
go back to reference Rahman MR, Haque MM, Islam MN, Hasan M (2009) Mechanical properties of polypropylene composites reinforced with chemically treated abaca. Compos Part A 40:511–517CrossRef Rahman MR, Haque MM, Islam MN, Hasan M (2009) Mechanical properties of polypropylene composites reinforced with chemically treated abaca. Compos Part A 40:511–517CrossRef
go back to reference Rapp AO, Bestgen H, Adam W, Peek RD (1999) Electron energy loss spectroscopy (EELS) for qualification of cell-wall penetration of a melamine resin. Holz 53(2):111–117 Rapp AO, Bestgen H, Adam W, Peek RD (1999) Electron energy loss spectroscopy (EELS) for qualification of cell-wall penetration of a melamine resin. Holz 53(2):111–117
go back to reference Ray SS, Okamoto M (2003) Polymer/layered silicate nano-composites: A review from preparation to processing. Prog Polym Sci 28:1539–1641CrossRef Ray SS, Okamoto M (2003) Polymer/layered silicate nano-composites: A review from preparation to processing. Prog Polym Sci 28:1539–1641CrossRef
go back to reference Rowell RM (1983) Chemical modification of wood. Forest Prod Abst 6(12):363–382 Rowell RM (1983) Chemical modification of wood. Forest Prod Abst 6(12):363–382
go back to reference Rowell RM (1995) Chemical modification of wood for improved adhesion in composites. USDA Forest Products Laboratory Madison, Wisconsin, pp 56–60 Rowell RM (1995) Chemical modification of wood for improved adhesion in composites. USDA Forest Products Laboratory Madison, Wisconsin, pp 56–60
go back to reference Rowell RM (2005) Chemical modification of wood for improved adhesion in composites. USDA forest Products Laboratory Madison, Wisconsin, pp 56–60 Rowell RM (2005) Chemical modification of wood for improved adhesion in composites. USDA forest Products Laboratory Madison, Wisconsin, pp 56–60
go back to reference Rowell RM (2006) Chemical modification of wood: a short review. Wood Mater Sci Eng 1:29–33CrossRef Rowell RM (2006) Chemical modification of wood: a short review. Wood Mater Sci Eng 1:29–33CrossRef
go back to reference Rowell RM, Moisuk R, Meyer JA (1982) Wood-polymer composites: cell wall grafting with alkylene oxides and lumen treatments with methyl methacrylate. Wood Sci 15:90–96 Rowell RM, Moisuk R, Meyer JA (1982) Wood-polymer composites: cell wall grafting with alkylene oxides and lumen treatments with methyl methacrylate. Wood Sci 15:90–96
go back to reference Rowell RM, Simonson R, Hess S, Plackett DV, Cronshaw D, Dunningham E (1994) Acetyl distribution in acetylated whole wood and reactivity of isolated wood cell wall components to acetic anhydride. Wood Fiber Sci 26(1):11–18 Rowell RM, Simonson R, Hess S, Plackett DV, Cronshaw D, Dunningham E (1994) Acetyl distribution in acetylated whole wood and reactivity of isolated wood cell wall components to acetic anhydride. Wood Fiber Sci 26(1):11–18
go back to reference Rowell RM, Tillman AM, Simonson R (1986) Vapour phase acetylation of southern pine, douglas-fir and aspen wood flakes. J Wood Chem Technol 6:293–309CrossRef Rowell RM, Tillman AM, Simonson R (1986) Vapour phase acetylation of southern pine, douglas-fir and aspen wood flakes. J Wood Chem Technol 6:293–309CrossRef
go back to reference Saka S, Sasaki M, Tanahashi M (1992) Wood-inorganic composites prepared by sol-gel processing I. Wood-inorganic composites with porous structure. Mokuzai Gakkashi 38(11):1043–1049 Saka S, Sasaki M, Tanahashi M (1992) Wood-inorganic composites prepared by sol-gel processing I. Wood-inorganic composites with porous structure. Mokuzai Gakkashi 38(11):1043–1049
go back to reference Saka S, Ueno T (1997) Several SiO2 wood-inorganic composites and their fire- resisting properties. Wood Sci Technol 31:457–466 Saka S, Ueno T (1997) Several SiO2 wood-inorganic composites and their fire- resisting properties. Wood Sci Technol 31:457–466
go back to reference Saka S, Yakake Y (1993) Wood-inorganic composites prepared by sol-gel process III. Chemically-modified wood-inorganic composites. Mokuzai Gakkashi 39(3):308–314 Saka S, Yakake Y (1993) Wood-inorganic composites prepared by sol-gel process III. Chemically-modified wood-inorganic composites. Mokuzai Gakkashi 39(3):308–314
go back to reference Salah UH, Raman PS (2014) Effect of hygrothermal aging on the mechanical properties of fluorinated ad nonfluorinated clay-epoxy nanocomposites. Int Scholarly Res Notices 2014:1–13 Salah UH, Raman PS (2014) Effect of hygrothermal aging on the mechanical properties of fluorinated ad nonfluorinated clay-epoxy nanocomposites. Int Scholarly Res Notices 2014:1–13
go back to reference Schneider MH (1994) Wood polymer composites. Wood Fiber Sci 26(1):142–151 Schneider MH (1994) Wood polymer composites. Wood Fiber Sci 26(1):142–151
go back to reference Schneider MH (1995) New cell wall and cell lumen wood polymer composites. Wood Sci Technol 29:121–127CrossRef Schneider MH (1995) New cell wall and cell lumen wood polymer composites. Wood Sci Technol 29:121–127CrossRef
go back to reference Schneider MH, Brebner KI (1985) Wood-polymer combinations: The chemical modification of wood by alkoxysilane coupling agents. Wood Sci Technol 19:67–73CrossRef Schneider MH, Brebner KI (1985) Wood-polymer combinations: The chemical modification of wood by alkoxysilane coupling agents. Wood Sci Technol 19:67–73CrossRef
go back to reference Siau JF (1969) The swelling of basswood by vinyl monomers. Wood Sci 1(4):250–253 Siau JF (1969) The swelling of basswood by vinyl monomers. Wood Sci 1(4):250–253
go back to reference Siau JF, Meyer JA (1966) Comparison of the properties of heat and radiation cured wood-polymer combinations. Forest Prod J 15(10):426–434 Siau JF, Meyer JA (1966) Comparison of the properties of heat and radiation cured wood-polymer combinations. Forest Prod J 15(10):426–434
go back to reference Siau JF, Meyer JA, Skaar C (1965) Wood-polymer combinations using radiation techniques. Forest Prod J 15(10):426–434 Siau JF, Meyer JA, Skaar C (1965) Wood-polymer combinations using radiation techniques. Forest Prod J 15(10):426–434
go back to reference Siau JF, Smith WB, Meyer JA (1978) Wood-polymer composites from southern hardwoods. Wood Sci 10(3):158–164 Siau JF, Smith WB, Meyer JA (1978) Wood-polymer composites from southern hardwoods. Wood Sci 10(3):158–164
go back to reference Simkovic I, Martvonova H, Manikova D, Grexa O (2005) Flame retardance of insolubilized silica inside of wood material. J Appl Polym Sci 97:1948–1952CrossRef Simkovic I, Martvonova H, Manikova D, Grexa O (2005) Flame retardance of insolubilized silica inside of wood material. J Appl Polym Sci 97:1948–1952CrossRef
go back to reference Singha AS, Thakur VK (2009) Study of mechanical properties of urea formaldehyde thermosets reinforced by pine needle powder. BioRes 4(1):292–308 Singha AS, Thakur VK (2009) Study of mechanical properties of urea formaldehyde thermosets reinforced by pine needle powder. BioRes 4(1):292–308
go back to reference Skreekala MS, Thomas S (2003) Effect of fiber surface modification on water—sorption characteristics of oil palm fibres. Compos Sci Technol 63:861–869CrossRef Skreekala MS, Thomas S (2003) Effect of fiber surface modification on water—sorption characteristics of oil palm fibres. Compos Sci Technol 63:861–869CrossRef
go back to reference Stamm AJ, Baechler RH (1960) Decay resistance and dimensional stability of five modified woods. Forest Prod J 10:22–26 Stamm AJ, Baechler RH (1960) Decay resistance and dimensional stability of five modified woods. Forest Prod J 10:22–26
go back to reference Stevens M, Schalck J, Van Raemdonck J (1979) Chemical modification of wood by vapor phase treatment with formaldehyde and sulphur dioxide. Int J Wood Preservation 1(2):57–68 Stevens M, Schalck J, Van Raemdonck J (1979) Chemical modification of wood by vapor phase treatment with formaldehyde and sulphur dioxide. Int J Wood Preservation 1(2):57–68
go back to reference Su S, Wilkie CA (2003) Exfoliated poly(methyl methacrylate) and polystyrene nanocomposites occur when the clay contains a vinyl monomer. J Polym Sci Part A 41:1124–1135CrossRef Su S, Wilkie CA (2003) Exfoliated poly(methyl methacrylate) and polystyrene nanocomposites occur when the clay contains a vinyl monomer. J Polym Sci Part A 41:1124–1135CrossRef
go back to reference Thakur VK, Islam MS, Hasan M, Ahmad MB (2014) Chemical Modification and properties of cellulose-based polymer composites. Scrivener Publishing LLC, Beverly Thakur VK, Islam MS, Hasan M, Ahmad MB (2014) Chemical Modification and properties of cellulose-based polymer composites. Scrivener Publishing LLC, Beverly
go back to reference Tunc MS, Lawoko M, Heiningen A (2010) Understanding the limitations of removal of hemicelluloses during autohydrolysis of a mixture of southern hardwoods. BioRes 5(1):356–371 Tunc MS, Lawoko M, Heiningen A (2010) Understanding the limitations of removal of hemicelluloses during autohydrolysis of a mixture of southern hardwoods. BioRes 5(1):356–371
go back to reference Usuki A, Kawasumi M, Kojima Y, Fujushima A, Okada A, Kamigaito O (1993a) Swelling behaviour of montmorillonite cation exchanged for v-amino acids by ε-caprolactam. J Mater Res 8:1174–1178CrossRef Usuki A, Kawasumi M, Kojima Y, Fujushima A, Okada A, Kamigaito O (1993a) Swelling behaviour of montmorillonite cation exchanged for v-amino acids by ε-caprolactam. J Mater Res 8:1174–1178CrossRef
go back to reference Usuki A, Kojima Y, Kawasumi M, Okada A, Fujushima A, Kurauchi T, Kamigaito O (1993b) Synthesis of nylon 6-clay hybrid. J Mater Res 8:1179–1184CrossRef Usuki A, Kojima Y, Kawasumi M, Okada A, Fujushima A, Kurauchi T, Kamigaito O (1993b) Synthesis of nylon 6-clay hybrid. J Mater Res 8:1179–1184CrossRef
go back to reference Valente M, Sarasini F, Marra F, Tirillo J, Pulci G (2011) Hybrid recycled glass fiber/wood flour thermoplastic composites: manufacturing and mechanical characterization. Compos Part A 42:649–657CrossRef Valente M, Sarasini F, Marra F, Tirillo J, Pulci G (2011) Hybrid recycled glass fiber/wood flour thermoplastic composites: manufacturing and mechanical characterization. Compos Part A 42:649–657CrossRef
go back to reference Wan H (2004) Report: wood hardening technologies. FPInnovations, Canada Wan H (2004) Report: wood hardening technologies. FPInnovations, Canada
go back to reference Wang SG (ed) (2007) Personal communication with Martin Feng. FPInnovations, Canada Wang SG (ed) (2007) Personal communication with Martin Feng. FPInnovations, Canada
go back to reference Wright JR, Mathias LJ (1993) New lightweight materials: Balsa wood-polymer composites based on ethyl a-(hydroxylmethyl) acrylate. J Appl Polym Sci 48:2241–2247CrossRef Wright JR, Mathias LJ (1993) New lightweight materials: Balsa wood-polymer composites based on ethyl a-(hydroxylmethyl) acrylate. J Appl Polym Sci 48:2241–2247CrossRef
go back to reference Ximenes FA, Evand PD (2006) Protection of wood using oxy-aluminum compounds. Forest Prod J 56:116–112 Ximenes FA, Evand PD (2006) Protection of wood using oxy-aluminum compounds. Forest Prod J 56:116–112
go back to reference Yalinkilic MK, Imamura Y, Takahashi M, Demirci Z, Yalinkilic AC (1999) Biological, mechanical and thermal properties of compressed-wood polymer composites (CWPC) pretreated with boric acid. Wood Fiber Sci 31(2):151–163 Yalinkilic MK, Imamura Y, Takahashi M, Demirci Z, Yalinkilic AC (1999) Biological, mechanical and thermal properties of compressed-wood polymer composites (CWPC) pretreated with boric acid. Wood Fiber Sci 31(2):151–163
go back to reference Yalinkilic MK, Takahashi M, Imamura Y, Gezer ED, Demirci Z, Iihan R (1991) Boron addition to non or low formaldehyde cross-linking reagents to enhance biological existence and dimensional stability for wood. Holz als Roh-und werkstoff 57(1):151–163 Yalinkilic MK, Takahashi M, Imamura Y, Gezer ED, Demirci Z, Iihan R (1991) Boron addition to non or low formaldehyde cross-linking reagents to enhance biological existence and dimensional stability for wood. Holz als Roh-und werkstoff 57(1):151–163
go back to reference Yalinkilic MK, Tsunoda K, Takahashi M, Gezer ED, Dwianto W, Nemoto H (1998) Enhancement of biological and physical properties of woof by boric acid-vinyl monomer combination treatment. Holz 52(6):667–672CrossRef Yalinkilic MK, Tsunoda K, Takahashi M, Gezer ED, Dwianto W, Nemoto H (1998) Enhancement of biological and physical properties of woof by boric acid-vinyl monomer combination treatment. Holz 52(6):667–672CrossRef
go back to reference Yamaguchi H (1994a) Properties of silicic acid compounds as chemical agents for impregnation and fixation of wood. Mokuzai Gakkashi 40(8):830–837 Yamaguchi H (1994a) Properties of silicic acid compounds as chemical agents for impregnation and fixation of wood. Mokuzai Gakkashi 40(8):830–837
go back to reference Yamaguchi H (1994b) Preparation and physical properties of wood fixed with silicic acid compounds. Mokuzai Gakkashi 40(8):838–845 Yamaguchi H (1994b) Preparation and physical properties of wood fixed with silicic acid compounds. Mokuzai Gakkashi 40(8):838–845
go back to reference Yap MGS, Chia LHL, Teoh SH (1990) Wood polymer composites from some tropical hardwood. J Wood Chem Technol 10(1):1–19CrossRef Yap MGS, Chia LHL, Teoh SH (1990) Wood polymer composites from some tropical hardwood. J Wood Chem Technol 10(1):1–19CrossRef
go back to reference Yasuda R, Minato K (1995) Chemical modification of wood by non-formaldehyde crosslinking reagents. Wood Sci Technol 29:243–251CrossRef Yasuda R, Minato K (1995) Chemical modification of wood by non-formaldehyde crosslinking reagents. Wood Sci Technol 29:243–251CrossRef
go back to reference Young RA, Meyer JA (1968) Heartwood and sapwood impregnations with vinyl monomers. Forest Prod J 18(4):66–68 Young RA, Meyer JA (1968) Heartwood and sapwood impregnations with vinyl monomers. Forest Prod J 18(4):66–68
go back to reference Zollfrank C, Wegener G (2002) FTIR microscopy and ultrastructural investigation of silylated solid wood. Holz 56(1):39–42 Zollfrank C, Wegener G (2002) FTIR microscopy and ultrastructural investigation of silylated solid wood. Holz 56(1):39–42
Metadata
Title
Introduction to Reinforcing Potential of Various Clay and Monomers Dispersed Wood Nanocomposites’
Authors
M. R. Rahman
J. C. H. Lai
Copyright Year
2018
DOI
https://doi.org/10.1007/978-3-319-65735-6_1

Premium Partners