Skip to main content
Top

Hint

Swipe to navigate through the articles of this issue

Published in: Metallurgist 1-2/2022

02-07-2022

Investigation of the Effect of Various Production Lubricants on Aluminum Alloy Strip Rolling Characteristics

Authors: R. L. Shatalov, V. Kh. Pham, V. Q. Tran

Published in: Metallurgist | Issue 1-2/2022

Login to get access
share
SHARE

Abstract

Results are provided for an experimental study of the effect of various production lubricants on deformation and force parameters during cold rolling of strips made of aluminum alloys AD33 and AMts with initial dimensions of 3 × 25 × 190 mm and 1.9 × 24 × 148 mm. Different contact friction conditions between strip and rolls are investigated: without lubrication (μ = 0.092), with lubricants: sunflower oil 5% (μ = 0.06), SP3 6% (μ = 0.071), palm oil (μ = 0.061), SAFECUT M170NT (μ = 0.071), and I40 5% (μ = 0.068) in a laboratory two-roll mill 150 × 235 in the Pressure and Additive Technology Materials Processing Department. It is shown that roll lubrication with industrial oil I40 (5%) reduces the rolling force by 12.32% and increases strip thickness uniformity along the length. The difference between deformation and force indices in the central and end sections when rolling aluminum strips with lubricants is less than when rolling strips in dry rolls. Application of the results of experimental rolling makes it possible to recommend use of lubrication by industrial oil I40 and to designate rational regimes for rolling strips, sheets, and tapes made of aluminum alloys in industrial mills and primarily in the 175 × 300 mill of the Dong Nai plant (Vietnam).
Literature
1.
go back to reference E. V. Aryshenskii, et al., “Study of the effect of billet rolling accuracy for producing drinking can metals,” Izv. Samar. Nauch. Tsentr RAN, No. 6, 269–273 (2011). E. V. Aryshenskii, et al., “Study of the effect of billet rolling accuracy for producing drinking can metals,” Izv. Samar. Nauch. Tsentr RAN, No. 6, 269–273 (2011).
2.
go back to reference Ya. D. Vasilev, “Procedure for calculating friction coefficient during cold rolling with emulsions based on empirical relationships,” Proizvod. Prokata, No. 7, 3–7 (2012). Ya. D. Vasilev, “Procedure for calculating friction coefficient during cold rolling with emulsions based on empirical relationships,” Proizvod. Prokata, No. 7, 3–7 (2012).
3.
go back to reference G. S. Nikitin, Continuous Longitudinal Rolling Theory [in Russian], N. E. Bauman MGTU, Moscow (2009). G. S. Nikitin, Continuous Longitudinal Rolling Theory [in Russian], N. E. Bauman MGTU, Moscow (2009).
4.
go back to reference Ya. D. Vasilev and A. A. Minaev, Theory o Longitudinal Rolling: High School Handbook [in Russian], INITEKH, Dontesk (2010). Ya. D. Vasilev and A. A. Minaev, Theory o Longitudinal Rolling: High School Handbook [in Russian], INITEKH, Dontesk (2010).
5.
go back to reference É. A. Garber, A. A. Goncharskii, et al., “Determination of friction coefficient during rolling with emulsions,” Proizvod. Prokata, No. 12, 2–3 (2000). É. A. Garber, A. A. Goncharskii, et al., “Determination of friction coefficient during rolling with emulsions,” Proizvod. Prokata, No. 12, 2–3 (2000).
6.
go back to reference A. P. Grudev, Rolling Theory [in Russian], 2dn. Ed, Intermet Inzhiniring, Moscow (2001). A. P. Grudev, Rolling Theory [in Russian], 2dn. Ed, Intermet Inzhiniring, Moscow (2001).
7.
go back to reference R. R. Dema, R. N. Amirov, Yu. D. Martynova, and Yu. Kh. Gataulina, “Statistical evaluation of the effect of lubricant on hot rolling energy and force parameters,” Stal’, No. 8, 40–42 (2015). R. R. Dema, R. N. Amirov, Yu. D. Martynova, and Yu. Kh. Gataulina, “Statistical evaluation of the effect of lubricant on hot rolling energy and force parameters,” Stal’, No. 8, 40–42 (2015).
8.
go back to reference A. P. Grudev, Yu. B. Zil’berg, and V. T. Tilik, Friction and Lubrication During Metal Forming [in Russian], Metallurgiya, Moscow (1982). A. P. Grudev, Yu. B. Zil’berg, and V. T. Tilik, Friction and Lubrication During Metal Forming [in Russian], Metallurgiya, Moscow (1982).
9.
go back to reference E. V. Aryshenskii, M. A. Pankratov, V. Yu. Aryshenskii, and É. D. Beglov, “Study of the effect of composite liquid lubricants on rolling force,” Mezh. Zh. Prikl. Fund. Issled, No. 3, 11–13 (2014). E. V. Aryshenskii, M. A. Pankratov, V. Yu. Aryshenskii, and É. D. Beglov, “Study of the effect of composite liquid lubricants on rolling force,” Mezh. Zh. Prikl. Fund. Issled, No. 3, 11–13 (2014).
10.
go back to reference V. K. Belosevich, Friction, Lubrication, Heat Exchange During Sheet Steel Cold Rolling [in Russian], Metallurgiya, Moscow (1982). V. K. Belosevich, Friction, Lubrication, Heat Exchange During Sheet Steel Cold Rolling [in Russian], Metallurgiya, Moscow (1982).
11.
go back to reference A. V. Zinov’ev, A. I. Kolpashnikov, I. P. Polukhin, et al., Nonferrous Metal Alloy Forming Technology [in Russian], Metallurgiya, Moscow (1992). A. V. Zinov’ev, A. I. Kolpashnikov, I. P. Polukhin, et al., Nonferrous Metal Alloy Forming Technology [in Russian], Metallurgiya, Moscow (1992).
12.
go back to reference E. V. Aryshenskii, V. V. Yashin, I. A. Latushkin, and A. V. Baev, “Study of antifriction properties of rolling lubricant for aluminum alloys by limiting reduction method,” Fund. Issled., No. 3-1, 15–18 (2015). E. V. Aryshenskii, V. V. Yashin, I. A. Latushkin, and A. V. Baev, “Study of antifriction properties of rolling lubricant for aluminum alloys by limiting reduction method,” Fund. Issled., No. 3-1, 15–18 (2015).
13.
go back to reference I. V. Snegirev and Yu. N. Loginov, “Effect of kinematic viscosity of lubricant cooling liquid on cold rolling force for aluminum alloy,” in: Proc. III Young. Sci.-Pract. Conf. (2018), pp. 36–37. I. V. Snegirev and Yu. N. Loginov, “Effect of kinematic viscosity of lubricant cooling liquid on cold rolling force for aluminum alloy,” in: Proc. III Young. Sci.-Pract. Conf. (2018), pp. 36–37.
14.
go back to reference R. A. Shatalov, V. Kh. Fam, and V. K. Chan, “Effect of lubricants and models of contact pressure on rolling force over the length of thin aluminum strips,” Metallurg, No. 6, 64-72 (2021). R. A. Shatalov, V. Kh. Fam, and V. K. Chan, “Effect of lubricants and models of contact pressure on rolling force over the length of thin aluminum strips,” Metallurg, No. 6, 64-72 (2021).
15.
go back to reference V. Kh. Fan and V. K. Chan, “Effect of lubricant materials on rolling force over the length of thin copper strips,” in: Proc. All-Russia Sci. Pract. Conf. “Science. Society. Technology 2021”, 26 March, Moscow (2021), pp. 208–211. V. Kh. Fan and V. K. Chan, “Effect of lubricant materials on rolling force over the length of thin copper strips,” in: Proc. All-Russia Sci. Pract. Conf. “Science. Society. Technology 2021”, 26 March, Moscow (2021), pp. 208–211.
16.
go back to reference V. Kh. Fan, V. K. Chan, and M. S. Yadrov, “Effect of lubricants and contact pressure models on rolling force over the length of thin aluminum strips,” in: Proc. III Internat. Sci.-Tech. Conf. devoted to 120 Years Since the Birth of Corresponding Member of the USSR Academy of Sciences I. M. Pavlov “PAVLOVSKIE READINGS”, 27–28 Mar., Moscow (2021), pp. 63–64 V. Kh. Fan, V. K. Chan, and M. S. Yadrov, “Effect of lubricants and contact pressure models on rolling force over the length of thin aluminum strips,” in: Proc. III Internat. Sci.-Tech. Conf. devoted to 120 Years Since the Birth of Corresponding Member of the USSR Academy of Sciences I. M. Pavlov “PAVLOVSKIE READINGS”, 27–28 Mar., Moscow (2021), pp. 63–64
17.
go back to reference R. A. Shatalov, A. S. Lukash, and Yu. F. Timin, “Creation and study of microprocessor control system for rolling forces in a two-roll sheet mill,” Metallurg, No. 10, 70–73 (2015). R. A. Shatalov, A. S. Lukash, and Yu. F. Timin, “Creation and study of microprocessor control system for rolling forces in a two-roll sheet mill,” Metallurg, No. 10, 70–73 (2015).
18.
go back to reference Ya. D. Vasilev, R. A. Zamogil’nyi, D. N. Samokish, and A. V. Oleinik, “Increase in precision of calculating friction coefficient during strip cold rolling,” Obrabotka Mater. Davleniem, No. 1 (44), 187–191 (2017). Ya. D. Vasilev, R. A. Zamogil’nyi, D. N. Samokish, and A. V. Oleinik, “Increase in precision of calculating friction coefficient during strip cold rolling,” Obrabotka Mater. Davleniem, No. 1 (44), 187–191 (2017).
19.
go back to reference R. L. Shatalov, Planning Sheet Rolling Process Parameters: Handbook [in Russian], Moscow. Polytech. (2018). R. L. Shatalov, Planning Sheet Rolling Process Parameters: Handbook [in Russian], Moscow. Polytech. (2018).
20.
go back to reference A. I. Tselikov, A. D. Tomlenov, V. I. Zyuzin, A. V. Tret’yakov, and G. S. Nikitin, Rolling Theory: Handbook [in Russian], Metallurgiya, Moscow (1982). A. I. Tselikov, A. D. Tomlenov, V. I. Zyuzin, A. V. Tret’yakov, and G. S. Nikitin, Rolling Theory: Handbook [in Russian], Metallurgiya, Moscow (1982).
21.
go back to reference R. L. Shatalov, E. V. Krutina, A. S. Lukash, O. A. Belkina, and S. A. Brazhnikov, “Effect of contact friction conditions on deformation and force indices during rolling thin copper and brass strip,” Proizvod. Prokata, No. 5, 3–6 (2015). R. L. Shatalov, E. V. Krutina, A. S. Lukash, O. A. Belkina, and S. A. Brazhnikov, “Effect of contact friction conditions on deformation and force indices during rolling thin copper and brass strip,” Proizvod. Prokata, No. 5, 3–6 (2015).
22.
go back to reference R. L. Shatalov, A. S. Lukash, and K. V. Chan, “Effect of lubricant on deformation force indices and dimensions of copper and brass sheets during rolling,” Izv. TulGU, No. 12, 125–127 (2019). R. L. Shatalov, A. S. Lukash, and K. V. Chan, “Effect of lubricant on deformation force indices and dimensions of copper and brass sheets during rolling,” Izv. TulGU, No. 12, 125–127 (2019).
23.
go back to reference R. A. Shatalov and M. A. Kulikov, “Distribution of dimensions and rolling forces over the length of brass and bronze strips in a two-roll stand mill,” Tekhnologiya Metallov, No. 8, 32–40 (2020). R. A. Shatalov and M. A. Kulikov, “Distribution of dimensions and rolling forces over the length of brass and bronze strips in a two-roll stand mill,” Tekhnologiya Metallov, No. 8, 32–40 (2020).
Metadata
Title
Investigation of the Effect of Various Production Lubricants on Aluminum Alloy Strip Rolling Characteristics
Authors
R. L. Shatalov
V. Kh. Pham
V. Q. Tran
Publication date
02-07-2022
Publisher
Springer US
Published in
Metallurgist / Issue 1-2/2022
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-022-01309-y

Other articles of this Issue 1-2/2022

Metallurgist 1-2/2022 Go to the issue

Premium Partners