Skip to main content
Top
Published in: International Journal of Material Forming 2/2019

29-01-2018 | Thematic Issue: Advances in Material Forming Simulation

Investigations of tangential ultrasonic vibration turning of Ti6Al4V using finite element method

Authors: Jiajia Zhang, Dazhong Wang

Published in: International Journal of Material Forming | Issue 2/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Ultrasonic vibration (UV) machining is a process in which micro-scale high frequency vibration is added on the cutting tool to improve machining performance. Its principal is to make the interaction between tool and workpiece a periodically separation, and the direction of the friction between tool and chip is changed in each cycle of the ultrasonic vibration. In this paper, the mechanism of ultrasonic vibration cutting, the effects of ultrasonic vibration on the forces, temperature, stress and chip shape during orthogonal cutting of Ti6Al4V material are studied with finite element method(FEM). The conventional and ultrasonic vibration cutting are simulated using Arbitrary Lagrange-Eulerian(ALE) approach in ABAQUS/Explicit. Taken forces as index, the effects of cutting speed (40 m/min, 50 m/min, 60 m/min ), feed rate (0.08 mm/r, 0.12 mm/r, 0.16 mm/r ) and back engagements (0.1 mm, 0.3 mm, 0.5 mm ) on metal cutting are investigated separately by single factor test. The simulations are validated by the experimental findings and analytical data. The results show that the cutting forces, stress and temperature of ultrasonic vibration cutting are much smaller than conventional cutting.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Riaz M, Maurotto A, Silberschmidt VV, Siemers C, Hussain MS (2014) Analysis of a free maching alpha+beta titanium alloy using conventional and ultrasonically assisted turning. J Mater Process Technol 214:906–915CrossRef Riaz M, Maurotto A, Silberschmidt VV, Siemers C, Hussain MS (2014) Analysis of a free maching alpha+beta titanium alloy using conventional and ultrasonically assisted turning. J Mater Process Technol 214:906–915CrossRef
2.
go back to reference Maurotto A, Muhammad R, Roy A, Silberschmidt VV (2013) Enhanced ultrasonically assisted turning of a beta-titanium alloy. CIRP J Manuf Sci Technol 7:159–167 Maurotto A, Muhammad R, Roy A, Silberschmidt VV (2013) Enhanced ultrasonically assisted turning of a beta-titanium alloy. CIRP J Manuf Sci Technol 7:159–167
3.
go back to reference Fess E, Bechtold R, Bechtold M (2013) Ultrasonic processing of hard materials for conformal optics. Proc SPIE 36:811–815 Fess E, Bechtold R, Bechtold M (2013) Ultrasonic processing of hard materials for conformal optics. Proc SPIE 36:811–815
4.
go back to reference Amini S, Khosrojerdi MR, Nosouhi R, Behbahani S (2014) An experimental investigation on the machinability of Al2O3 in vibration assisted turning using PCD tool. Mater Manuf Process 29:331–336CrossRef Amini S, Khosrojerdi MR, Nosouhi R, Behbahani S (2014) An experimental investigation on the machinability of Al2O3 in vibration assisted turning using PCD tool. Mater Manuf Process 29:331–336CrossRef
5.
go back to reference Bulla B, Klocke F, Dambon O (2012) Ultrasonic assisted diamond turning of hardened steel for mould manufacturing. Proceedings of Precision Engineering and Nanotechnology 516:437–442 Bulla B, Klocke F, Dambon O (2012) Ultrasonic assisted diamond turning of hardened steel for mould manufacturing. Proceedings of Precision Engineering and Nanotechnology 516:437–442
6.
go back to reference Xu W, Wang L (2014) On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibrereinforced ploymer composites. Int J Mach Tools Manuf 80:1–10CrossRef Xu W, Wang L (2014) On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibrereinforced ploymer composites. Int J Mach Tools Manuf 80:1–10CrossRef
7.
go back to reference Zhang XQ, Arif M, Liu K (2013) A model to predict the critical undeformed chip thickness in vibration-assisted machining of brittle materials. Int J Mach Tools Manuf 69:57–66CrossRef Zhang XQ, Arif M, Liu K (2013) A model to predict the critical undeformed chip thickness in vibration-assisted machining of brittle materials. Int J Mach Tools Manuf 69:57–66CrossRef
8.
go back to reference Maurotto A, Muhammad R, Roy A, Babitsky VI, Silberschmidt VV (2012) Comparing machinability of Ti-15-3-3-3 and Ni-625 alloys in UAT. Proc Cirp 1:330–335CrossRef Maurotto A, Muhammad R, Roy A, Babitsky VI, Silberschmidt VV (2012) Comparing machinability of Ti-15-3-3-3 and Ni-625 alloys in UAT. Proc Cirp 1:330–335CrossRef
9.
go back to reference Dong GJ, Zhang HJ, Zhou M (2013) Experimental investigation on ultrasonic vibration-assisted turning of SiCp/Al composites. Mater Manuf Process 28:999–1002 Dong GJ, Zhang HJ, Zhou M (2013) Experimental investigation on ultrasonic vibration-assisted turning of SiCp/Al composites. Mater Manuf Process 28:999–1002
10.
go back to reference Xu W, Zhang LC, Wu Y (2014) Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: understanding the material removal mechanisms. Compos Sci Technol 92:103–111CrossRef Xu W, Zhang LC, Wu Y (2014) Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: understanding the material removal mechanisms. Compos Sci Technol 92:103–111CrossRef
11.
go back to reference Kumabe J, Masuko M (1958) Study on the ultrasonic cutting (1st report). Trans Jpn Soc Mech Eng 24:109–114CrossRef Kumabe J, Masuko M (1958) Study on the ultrasonic cutting (1st report). Trans Jpn Soc Mech Eng 24:109–114CrossRef
12.
go back to reference Kumabe J (1961) Study on ultrasonic cutting: 2nd report, the mechanism of tool rest for ultrasonic cutting. Trans Jpn Soc Mech Eng 27:1389–1396CrossRef Kumabe J (1961) Study on ultrasonic cutting: 2nd report, the mechanism of tool rest for ultrasonic cutting. Trans Jpn Soc Mech Eng 27:1389–1396CrossRef
13.
go back to reference Kumabe J (1961) Study on ultrasonic cutting: 3rd report, an analysis of the mechanism of ultrasonic cutting. Trans Jpn Soc Mech Eng 27:1396–1404CrossRef Kumabe J (1961) Study on ultrasonic cutting: 3rd report, an analysis of the mechanism of ultrasonic cutting. Trans Jpn Soc Mech Eng 27:1396–1404CrossRef
14.
go back to reference Weber H, Herberger J, Pilz R (1984) Turning of machinable glass ceramics with an ultrasonically vibrated tool. CIRP Ann 33:85–87CrossRef Weber H, Herberger J, Pilz R (1984) Turning of machinable glass ceramics with an ultrasonically vibrated tool. CIRP Ann 33:85–87CrossRef
15.
go back to reference Ahn JH, Lim HS, Son SM (1999) Improvement of micro-machining accuracy by 2-dimensional vibration cutting. In: Proceedings of the fourteenth annual meeting of the ASPE, pp 150–153 Ahn JH, Lim HS, Son SM (1999) Improvement of micro-machining accuracy by 2-dimensional vibration cutting. In: Proceedings of the fourteenth annual meeting of the ASPE, pp 150–153
16.
go back to reference Masahiko J, Masao M (2001) Development of a practical ultrasonic vibration cutting tool system. J Mater Process Technol 113:342–347CrossRef Masahiko J, Masao M (2001) Development of a practical ultrasonic vibration cutting tool system. J Mater Process Technol 113:342–347CrossRef
17.
go back to reference Kim GD, Loh BG (2010) Machining of micro-channels and pyramid patterns using elliptical vibration cutting. Int J Adv Manuf Technol 49:961–968CrossRef Kim GD, Loh BG (2010) Machining of micro-channels and pyramid patterns using elliptical vibration cutting. Int J Adv Manuf Technol 49:961–968CrossRef
18.
go back to reference Nosouhi R, Behbahani S, Amini S, Khosrojerdi M (2013) Experimental and analytical study of the elliptical vibration-assisted turning process with the dynamic friction model. Proc Inst Mech Eng Part B: J Eng Manuf 228:837–846CrossRef Nosouhi R, Behbahani S, Amini S, Khosrojerdi M (2013) Experimental and analytical study of the elliptical vibration-assisted turning process with the dynamic friction model. Proc Inst Mech Eng Part B: J Eng Manuf 228:837–846CrossRef
19.
go back to reference Patil S, Joshi S, Tewari A, Joshi SS (2014) Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. Ultrasonics 54:694–705CrossRef Patil S, Joshi S, Tewari A, Joshi SS (2014) Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. Ultrasonics 54:694–705CrossRef
20.
go back to reference Zhou XQ, Zuo CM, Liu Q, Wang R, Lin J (2016) Development of a double-frequency elliptical vibration cutting apparatus for freeform surface diamond machining. Int J Adv Manuf Technol :1–13 Zhou XQ, Zuo CM, Liu Q, Wang R, Lin J (2016) Development of a double-frequency elliptical vibration cutting apparatus for freeform surface diamond machining. Int J Adv Manuf Technol :1–13
21.
go back to reference Bai W, Sun R, Gao Y, Leopold J (2016) Analysis and modeling of force in orthogonal elliptical vibration cutting. Int J Adv Manuf Technol 83(5-8):1025–1036CrossRef Bai W, Sun R, Gao Y, Leopold J (2016) Analysis and modeling of force in orthogonal elliptical vibration cutting. Int J Adv Manuf Technol 83(5-8):1025–1036CrossRef
22.
go back to reference Xie XD, Li Y, Duong CV, Alzahrani A (2012) Experiment and discussion on ultrasonic vibration-assisted single point diamond turning of die steels. Ultra-Precis Mach Technol 497:1–5 Xie XD, Li Y, Duong CV, Alzahrani A (2012) Experiment and discussion on ultrasonic vibration-assisted single point diamond turning of die steels. Ultra-Precis Mach Technol 497:1–5
23.
go back to reference Shamoto E, Suzuki N, Moriwaki T, Naoi Y (2002) Development of ultrasonic elliptical vibration controller for elliptical vibration cutting. CIRP Ann 51:327–330CrossRef Shamoto E, Suzuki N, Moriwaki T, Naoi Y (2002) Development of ultrasonic elliptical vibration controller for elliptical vibration cutting. CIRP Ann 51:327–330CrossRef
24.
go back to reference Ostasevicius V, Gaidys R, Rimkeviciene J, Dauksevicius R (2010) An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting. J Sound Vib 329:4866–4879CrossRef Ostasevicius V, Gaidys R, Rimkeviciene J, Dauksevicius R (2010) An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting. J Sound Vib 329:4866–4879CrossRef
25.
go back to reference Brehl DE, Dow TA (2008) Review of vibration-assisted machining. Precis Eng 32:153–172CrossRef Brehl DE, Dow TA (2008) Review of vibration-assisted machining. Precis Eng 32:153–172CrossRef
26.
go back to reference Shamoto E, Moriwaki T (1994) Study on elliptical vibration cutting. CIRP Ann 43:35–38CrossRef Shamoto E, Moriwaki T (1994) Study on elliptical vibration cutting. CIRP Ann 43:35–38CrossRef
27.
go back to reference Jeong-Du K, In-Hyu C (1998) Characteristics of chip generation by ultrasonic vibration cutting with extremely low cutting velocity. Int J Adv Manuf Technol 14:2–6CrossRef Jeong-Du K, In-Hyu C (1998) Characteristics of chip generation by ultrasonic vibration cutting with extremely low cutting velocity. Int J Adv Manuf Technol 14:2–6CrossRef
28.
go back to reference Mitrofanov AV, Babitsky VI, Silberschmidt VV (2004) Finite element analysis of ultrasonic assisted turning of of Inconel 718. J Mater Process Technol 11:233–239CrossRef Mitrofanov AV, Babitsky VI, Silberschmidt VV (2004) Finite element analysis of ultrasonic assisted turning of of Inconel 718. J Mater Process Technol 11:233–239CrossRef
29.
go back to reference Wan L, Wang DZ (2015) Numerical analysis of the formation of the dead metal zone with different tools in orthogonal cutting. Simul Model Pract Theory 56:1–15CrossRef Wan L, Wang DZ (2015) Numerical analysis of the formation of the dead metal zone with different tools in orthogonal cutting. Simul Model Pract Theory 56:1–15CrossRef
30.
go back to reference Ahmed A, Sathyan S (2010) Experimental investigation of transverse vibration-assisted orthogonal cutting of Al-2024. Int J Mach Tool Manu 50:294–302CrossRef Ahmed A, Sathyan S (2010) Experimental investigation of transverse vibration-assisted orthogonal cutting of Al-2024. Int J Mach Tool Manu 50:294–302CrossRef
31.
go back to reference Fan YH, Zheng ML, Yang SC, Cheng MM (2011) Characteristics of cutting force in relation to tool wear and chip formation while cutting Ti6Al4V using carbide inserts. Technology and test 8:137–142 Fan YH, Zheng ML, Yang SC, Cheng MM (2011) Characteristics of cutting force in relation to tool wear and chip formation while cutting Ti6Al4V using carbide inserts. Technology and test 8:137–142
32.
go back to reference Xie P, Su GS (2009) The simulation and experiment of Ti-6Al-4V turning force. Journal of Suzhou University (Engineering science edition ) 29:43–46 Xie P, Su GS (2009) The simulation and experiment of Ti-6Al-4V turning force. Journal of Suzhou University (Engineering science edition ) 29:43–46
33.
go back to reference Jiao F, Zhao B, Liu CS, Xu KW (2002) Study on cutting force in ultrasonic vibration turning of siCP/al composite with PCD cutter. Tool engineering 36:22–25 Jiao F, Zhao B, Liu CS, Xu KW (2002) Study on cutting force in ultrasonic vibration turning of siCP/al composite with PCD cutter. Tool engineering 36:22–25
34.
go back to reference Patil S, Joshi S, Tewari A, Joshi SS (2014) Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. Ultrason 54:694–705CrossRef Patil S, Joshi S, Tewari A, Joshi SS (2014) Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. Ultrason 54:694–705CrossRef
35.
go back to reference Wang W, Song WQ (2015) Effect of vibration frequency on ultrasonic assisted cutting temperature. Journal of Nanchang Hangkong University: Natural Sciences 29:30–34 Wang W, Song WQ (2015) Effect of vibration frequency on ultrasonic assisted cutting temperature. Journal of Nanchang Hangkong University: Natural Sciences 29:30–34
Metadata
Title
Investigations of tangential ultrasonic vibration turning of Ti6Al4V using finite element method
Authors
Jiajia Zhang
Dazhong Wang
Publication date
29-01-2018
Publisher
Springer Paris
Published in
International Journal of Material Forming / Issue 2/2019
Print ISSN: 1960-6206
Electronic ISSN: 1960-6214
DOI
https://doi.org/10.1007/s12289-018-1402-y

Other articles of this Issue 2/2019

International Journal of Material Forming 2/2019 Go to the issue

Thematic Issue: Advances in Material Forming Simulation.

Multi-criteria optimization strategies for tree-structured production chains

Thematic Issue: Advances in Material Forming Simulation

Analysis of non-isothermal warm deep drawing of dual-phase DP600 steel

Premium Partners