Top

Rock Mechanics and Rock Engineering

Published in:

01-01-2014 | ISRM Suggested Method

ISRM Suggested Methods for Determining the Creep Characteristics of Rock

Authors: Ömer Aydan, Takashi Ito, Ugur Özbay, M. Kwasniewski, K. Shariar, T. Okuno, A. Özgenoğlu, D. F. Malan, T. Okada

Published in: Rock Mechanics and Rock Engineering | Issue 1/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Excerpt

It is important to note that creep is only one aspect of the time-dependent behavior of rocks. In Fig. 1, three cases are illustrated with respect to the complete stress–strain curve: creep, i.e., increasing strain when the stress is held constant; stress relaxation, i.e., decreasing stress when the strain is held constant; and a combination of both, when the rock unloads along a chosen unloading path. This ISRM suggested method deals only with the case of creep, which is particularly relevant for cases where the applied load or stress is kept constant. …

previous article ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen

next article ISRM Suggested Method for Laboratory Determination of the Shear Strength of Rock Joints: Revised Version

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Adachi T, Takase A (1981) Prediction of long term strength of soft rocks. In: Proceedings of international symposium on weak rock, pp 99–104

Adachi T, Sarata S, Sakurai S (1969) Determination of underground stress field based on inelastic properties of rocks. In: Proceedings of 11th symposium on rock mechanics, University of California, Berkeley, pp 293–328

Akagi T (1976) An analytical research on the visco-elastic behaviour of civil engineering structures. Doctorate thesis, Nagoya University (in Japanese)

Akagi T, Ichikawa Y, Kuroda T, Kawamoto T (1984) A non-linear rheological analysis of deeply located tunnels. Int J Num Anal Meth Geomech 8:107–120CrossRef

Akai K, Adachi T, Nishi K (1979) Time dependent characteristics and constitutive equations of soft sedimentary rocks (porous tuff). Proc JSCE 282–2:75–87 (in Japanese)

Aydan Ö (1995) The stress state of the earth and the earth’s crust due to the gravitational pull. The 35th US rock mechanics symposium, Lake Tahoe, pp 237–243

Aydan Ö, Nawrocki P (1998) Rate-dependent deformability and strength characteristics of rocks. In: International symposium on the geotechnics of hard soils-soft rocks, Napoli, vol 1, pp 403–411

Aydan Ö, Ulusay R (2013) Studies on Derinkuyu antique underground city and its implications in geo-engineering. Rock Mech Rock Eng. doi:10.1007/s00603-012-0301-7

Aydan Ö, Akagi T, Kawamoto T (1993) Squeezing potential of rocks around tunnels; theory and prediction. Rock Mech Rock Eng 26(2):137–163CrossRef

Aydan Ö, Seiki T, Jeong GC, Tokashiki N (1994) Mechanical behaviour of rocks, discontinuities and rock masses. In: Proceedings of international symposium pre-failure deformation characteristics of geomaterials, Sapporo, vol 2, pp 1161–1168

Aydan Ö, Akagi T, Ito T, Ito J, Sato J (1995) Prediction of deformation behaviour of a tunnel in squeezing rock with time-dependent characteristics. In: Proceedings of numerical models in geomechanics NUMOG V, pp 463–469

Aydan Ö, Tokashiki N, Ito T, Akagi T, Ulusay R, Bilgin HA (2003) An experimental study on the electrical potential of non-piezoelectric geomaterials during fracturing and sliding. In: 9th ISRM congress, South Africa, pp 73–78

Aydan Ö, Rassouli F, Ito T (2011) Multi-parameter responses of Oya tuff during experiments on its time-dependent characteristics. In: Proceedings of the 45th US rock mechanics/geomechanics symposium, San Francisco, ARMA, pp 11–294

Aydan Ö, Tokashiki N, Geniş M (2012) Some considerations on yield (failure) criteria in rock mechanics ARMA 12-640. In: Proceedings of 46th US rock mechanics/geomechanics symposium, Chicago, 10 p (on CD)

Berest P, Blum P, Charpentier J, Gharbi H, Vales F (2005) Very slow creep tests on rock samples. Int J Rock Mech Min Sci 42:569–576CrossRef

Bieniawski ZT (1970) Time-dependent behaviour of fractured rock. Rock Mech 2:123–137CrossRef

Boukharov GN, Chandi MW, Boukharov NG (1995) The three processes of brittle crystalline rock creep. Int J Rock Mech Min Sci Geomech Abstr 32 (4):325–335

Chan KS (1997) A damage mechanics treatment of creep failure in rock salt. Int J Damage Mech 6:122–152

Cristescu ND, Hunsche U (1998) Time effects in rock mechanics. Wiley, New York

Doktan M (1983) The longterm stability of room and pillar workings in a gypsum mine, Ph.D. thesis, University of Newcastle Upon Tyne

Drucker DC, Prager W (1952) Soil mechanics and plastic analysis for limit design. Q Appl Math 10(2):157–165

Fabre G, Pellet F (2006) Creep and time-dependent damage in argillaceous rocks. Int J Rock Mech Min Sci 43(6):950–960CrossRef

Farmer I (1983) Engineering behaviour of rocks, 2nd edn. Chapman and Hall, LondonCrossRef

Hagros A, Johanson E, Hudson JA (2008) Time dependency in the mechanical properties of crystalline rocks: a literature survey. Possiva OY, Finland

Hallbauer DK, Wagner H, Cook NGW (1973) Some observations concerning the microscopic and mechanical behaviour of quartzite specimens in stiff, triaxial compression tests. Int J Rock Mech Min Sci Geomech Abstr 10:713–726CrossRef

Hoek E, Brown ET (1980) Empirical strength criterion for rock masses. J Geotech Eng Div, ASCE, 106(GT9):1013–1035

Hondros G (1959) The evaluation of Poisson’s ratio and the modulus of materials of low tensile resistance by the Brazilian (indirect tensile) tests with particular reference to concrete. Aust J Appl Sci 10:243–268

Hunsche U (1992) True triaxial failure tests on cubic rock salt samples—experimental methods and results. In: Proceedings of IUTAM symposium on finite inelastic deformations—theory and applications, Hannover, Springer, pp 525–538

Hunsche U, Hampel A (1999) Rock salt—the mechanical properties of the host rock material for a radioactive waste repository. Eng Geol 52:271–291CrossRef

Ishizuka Y, Koyama H, Komura S (1993) Effect of strain rate on strength and frequency dependence of fatigue failure of rocks. In: Proceedings of assessment and prevention of failure phenomena in rock engineering, pp 321–327

ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods, international society for rock mechanics, compilation arranged by the ISRM Turkish National Group, Ankara, Turkey

Ito H (1991) On rheological behaviour of in situ rock based on long-term creep experiments. In: Proceedings of 7th ISRM congress, Aachen, Germany, vol 1, pp 265–268

Ito T, Akagi T (2001) Methods to predict the time of creep failure. In: Proceedings of the 31st symposium on rock mechanics of Japan, pp 77–81 (in Japanese)

Ito H, Sasajima S (1980) Long-term creep experiment on some rocks observed over three years. Tectonophysics 62(3–4):219–232CrossRef

Ito H, Sasajima S (1987) A ten year creep experiment on small rock specimens. Int J Rock Mech Min Sci Geomech Abstr 24:113–121CrossRef

Ito T, Fujiwara T, Akagi T (1999) Triaxial creep characteristics of soft rocks. In: Proceedings of the 29th symposium on rock mechanics of Japan, pp 126–130 (in Japanese)

Ito T, Aydan Ö, Ulusay R, Kaşmer Ö (2008) Creep characteristics of tuff in the vicinity of Zelve antique settlement in Cappadocia region of Turkey. In: Proceedings of 5th Asian Rock Mechanics Symposium (ARMS5), Tehran, pp 337–344

Jaeger JC, Cook NGW (1979) Fundamentals of rock mechanics, 3rd edn. Chapman & Hall, London, pp 79 and 311

Kawakita M, Sato K, Kinoshita S (1981) The dynamic fracture properties of rocks under confining pressure. Mem Fac Eng Hokkaido University 15(4):467–478

Ladanyi B (1974) Use of the long-term strength concept in the determination of ground pressure on tunnel linings. In: Proceedings of 3rd congress, international society for rock mechanics, Denver, vol. 2B, pp 1150–1165

Ladanyi B (1993) Time-dependent response of rock around tunnels. In: Fairhurst C (ed). Comprehensive rock engineering: principles, practice and projects, vol 2, Analysis and design methods. Pergamon, Oxford, pp 77–112

Lockner DA, Byerlee JD (1977) Acoustic emission and creep in rock at high confining pressure and differential stress. Bull Seismol Soc Am 67:247–258

Masuda K, Mizutani H, Yamada I (1987) Experimental study of strain-rate dependence and pressure dependence of failure properties of granite. J Phys Earth 35:37–66CrossRef

Masuda K, Mizutani H, Yamada I, Imanishi Y (1988) Effects of water on time-dependent behavior of granite. J Phys Earth 36:291–313CrossRef

Mirza UA (1978) Investigation into the design criteria for undergound openings in rocks which exhibit rheological behaviour. PhD thesis, University of Newcastle upon Tyne

Mottahed P, Szeki A (1982) The collapse of room and pillar workings in a shaley gypsum mine due to dynamic loading symposium on strata mech. Newcastle, pp 260–264

Okada T (2005) Mechanical properties of sedimentary soft rock at high temperatures (part 1) evaluation of temperature dependency based on triaxial compression test. Chiba, Japan: Central Research Institute of Electric Power Industry 04026, pp 1–26 (in Japanese)

Okada T (2006) Mechanical properties of sedimentary soft rock at high temperatures (part 2)—evaluation of temperature dependency of creep behavior based on unconfined compression test. Central Research Institute of Electric Power Industry, Chiba, Japan 05057, pp 1–26 (in Japanese)

Okubo S, Nishimatsu Y, Fukui K (1991) Complete creep curves under uniaxial compression. Int J Rock Mech Min Sci Geomech Abstr 28:77–82CrossRef

Okubo S, Fukui K, Nishimatsu Y (1993) Control performance of servocontrolled testing machines in compression and creep tests. Int J Rock Mech Min Sci Geomech Abstr 30:247–255CrossRef

Owen DRJ, Hinton E (1980) Finite element in plasticity: theory and practice. Pineridge Press Ltd, Swansea

Passaris EKS (1979) The rheological behaviour of rocksalt as determined in an in situ pressurized test cavity. Fourth International Congress on Rock Mechanics, Balkema, Rotterdam, pp 257–264

Peng S (1973) Time-dependent aspects of rock behavior as measured by a servo-controlled hydraulic testing machine. Int J Rock Mech Min Sci Geomech Abstr 10:235–246CrossRef

Perzyna P (1966) Fundamental problems in viscoplasticity. Adv Appl Mech 9(2):244–368

Serata S, Sakurai S, Adachi T (1968) Theory of aggregate rock behavior based on absolute three-dimensional testing (ATT) of rock salt. In: Proceedings of 10th symposium on rock mechanics, University of Texas at Austin, pp 431–473

Shibata K, Tani K, Okada T (2007) Creep behaviour of tuffaceous rock under high temperature observed in uniaxial compression test. Soil Found 47(1):1–10CrossRef

Slizowski J, Lankof L (2003) Salt-mudstones and rock-salt suitabilities for radioactive-waste storage systems: rheological properties. Appl Energy 75(1/2):137–144CrossRef

Ulusay R, Ito T, Akagi T, Seiki T, Yüzer E, Aydan Ö (1999) Long term mechanical characteristics of Cappadocia tuff. The 9th international rock mechanics congress, Paris, pp 687–690

Wawersik WR (1983) Determination of steady state creep rates an activation parameters for rock salt. In: High pressure testing of rock, special technical publication of ASTM, STP86972-91

Yang CH, Daemen JJK, Yin JH (1999) Experimental investigation of creep behavior of salt rock. Int J Rock Mech Min Sci 36(2):233–242CrossRef

Title: ISRM Suggested Methods for Determining the Creep Characteristics of Rock
Authors: Ömer Aydan
Takashi Ito
Ugur Özbay
M. Kwasniewski
K. Shariar
T. Okuno
A. Özgenoğlu
D. F. Malan
T. Okada
Publication date: 01-01-2014
Publisher: Springer Vienna
Published in: Rock Mechanics and Rock Engineering / Issue 1/2014
Print ISSN: 0723-2632
Electronic ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-013-0520-6

Springer Professional

Excerpt

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2014

ISRM Suggested Method for Reporting Rock Laboratory Test Data in Electronic Format

Upgraded ISRM Suggested Method for Determining Sound Velocity by Ultrasonic Pulse Transmission Technique

ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen

A Transversely Isotropic Damage Model for Boom Clay

The Thermal Volume Changes of the Callovo–Oxfordian Claystone

Thermo-Hydro-Mechanical Effects in Clay Host Rocks for Radioactive Waste Repositories