Issue 1/2008
Content (23 Articles)
Implementation of a Robust Algorithm for Prediction of Forming Limit Diagrams
M. Ganjiani, A. Assempour
Research of Metal Flow Behavior during Extrusion with Active Friction
Feng Li, S.J. Yuan, G. Liu, Z.B. He
Improvement of Drawability at Room Temperature in AZ31 Magnesium Alloy Sheets Processed by Equal Channel Angular Rolling
Yong Qi Cheng, Zhen Hua Chen, Wei Jun Xia, Tao Zhou
Formation of Irregular Nanocrystalline CeO2 Particles from Acetate-Based Precursor via Spray Pyrolysis
Chin-Yi Chen, Teng-Kuan Tseng, Chien-Yie Tsay, Chung-Kwei Lin
Microstructure and Element Distribution during Partial Remelting of an Al-4Cu-Mg alloy
Yalin Lu, Miaoquan Li, Yong Niu, Xingcheng Li
Effect of Auxiliary Preheating of the Filler Wire on Quality of Gas Metal Arc Stainless Steel Claddings
Amandeep S. Shahi, Sunil Pandey
The Effect of Time, Temperature and Composition on Boron Carbide Synthesis by Sol-gel Method
A.M. Hadian, J.A. Bigdeloo
Effect of Electromagnetic Stirring Conditions on Grain Size Characteristic of Wrought Aluminum for Rheo-forging
S.W. Oh, J.W. Bae, C.G. Kang
Assessment of Mechanical Strength Degradation Using an Embedded Fiber-Optic Sensor
H.N. Jones, N. Lagakos, S.G. Lambrakos, P.P. Trzaskoma-Paulette
The Impact of Corrosion on the Mechanical Behavior of Welded Splices of Reinforcing Steel S400 and B500c
Ch.Alk. Apostolopoulos, D. Michalopoulos, L. Dimitrov
J-Q Characterization of Constraint Effects of a Three-Dimensional Cracked Specimen
Fernando Labbé, Juan R. Donoso
Fracture Toughness of Phenol Formaldehyde Composites: Pilot Study
Harry Ku, David Rogers, Robert Davey, Francisco Cardona, Mohan Trada
Mechanical Properties of Borosilicate Glass Coated with Two-layered Ceramics by Sputtering
Toshihiko Hoshide, Takafumi Otomo
Electrochemical Corrosion Study of Tin-based Solders in Potassium Formate Brines for Heat Transfer Applications
Mingzhang Wang, Satish C. Mohapatra
Performance of Flame Sprayed Ni-WC Coating under Abrasive Wear Conditions
S. Harsha, D.K. Dwivedi, A. Agarwal
Effect of Pyrolysis Temperature on the Properties of Three-Dimensional Silica Fiber Reinforced Nitride Matrix Composites
Bin Li, Chang-Rui Zhang, Feng Cao, Si-Qing Wang, Ying-Bin Cao, Gong-Jin Qi, Yong-Gang Jiang
Controlling End-Grain Corrosion of Austenitic Stainless Steels
Kamlesh Chandra, Vivekanand Kain, Puppala Ganesh
Microstructural and Hardness Studies of Cu-10wt.%Sn Alloy Under Different Aging Conditions
Farooq Bashir, Muhammad Zakria Butt, Farhat Saleemi
Characterization of Hydrogen Permeation in Armco-Fe during Cathodic Polarization in Aqueous Electrolytic Media
Samuel M. Charca, Oswald N.C. Uwakweh, Basir Shafiq, Vinod S. Agarwala
Intermetallic Reactions in Reflowed and Aged Sn-58Bi BGA Packages with Au/Ni/Cu Pads
C.C. Chi, L.C. Tsao, C.W. Tsao, T.H. Chuang