Issue 1/2018
Content (34 Articles)
Additive Manufacturing of Metallic Materials: A Review
Yi Zhang, Linmin Wu, Xingye Guo, Stephen Kane, Yifan Deng, Yeon-Gil Jung, Je-Hyun Lee, Jing Zhang
Additive Manufacturing of Ceramic Heat Exchanger: Opportunities and Limits of the Lithography-Based Ceramic Manufacturing (LCM)
Uwe Scheithauer, Eric Schwarzer, Tassilo Moritz, Alexander Michaelis
Additive Manufacturing of Catalyst Substrates for Steam–Methane Reforming
Michelle Kramer, Millie McKelvie, Matthew Watson
Modeling of Powder Bed Manufacturing Defects
H.-W. Mindt, O. Desmaison, M. Megahed, A. Peralta, J. Neumann
Investigation of Droplet Deposition for Suspensions Usable for Thermoplastic 3D Printing (T3DP)
Uwe Scheithauer, Robert Johne, Steven Weingarten, Eric Schwarzer, Hans-Jürgen Richter, Tassilo Moritz, Alexander Michaelis
Room-Temperature Charpy Impact Property of 3D-Printed 15-5 Stainless Steel
Sugrim Sagar, Yi Zhang, Linmin Wu, Hye-Young Park, Je-Hyun Lee, Yeon-Gil Jung, Jing Zhang
Tensile, Creep, and Fatigue Behaviors of 3D-Printed Acrylonitrile Butadiene Styrene
Hanyin Zhang, Linlin Cai, Michael Golub, Yi Zhang, Xuehui Yang, Kate Schlarman, Jing Zhang
Process Evaluation of AISI 4340 Steel Manufactured by Laser Powder Bed Fusion
Elias Jelis, Michael R. Hespos, Nuggehalli M. Ravindra
Effect of Coil Current on the Properties of Hydrogenated DLC Coatings Fabricated by Filtered Cathodic Vacuum Arc Technique
Bin Liao, Xiaoping Ouyang, Xu Zhang, Xianying Wu, Baoan Bian, Minju Ying, Liu Jianwu
Experimental Study of the Microstructure and Micromechanical Properties of Laser Cladded Ni-based Amorphous Composite Coatings
Ruifeng Li, Qichi Zheng, Yanyan Zhu, Zhuguo Li, Kai Feng, Chuan Liu
Effects of the Electron Beam Welding Process on the Microstructure, Tensile, Fatigue and Fracture Properties of Nickel Alloy Nimonic 80A
H. Zhang, Chongxiang Huang, Zhongwei Guan, Jiukai Li, Yongjie Liu, Ronghua Chen, Qingyuan Wang
The Temperature Effect on the Compressive Behavior of Closed-Cell Aluminum-Alloy Foams
Nima Movahedi, Emanoil Linul, Liviu Marsavina
Passive and Semiconducting Properties Assessment of Commercially Pure Tantalum in Hank’s Physiological Solution
Arash Fattah-alhosseini, Mehdi Pourmahmoud
Characterization of Mechanical Properties and Residual Stress in API 5L X80 Steel Welded Joints
Amilton de Sousa Lins Jr., Luís Felipe Guimarães de Souza, Maria Cindra Fonseca
Effect of Compressive Mode I on the Mixed Mode I/II Fatigue Crack Growth Rate of 42CrMo4
Hasan Heirani, Khalil Farhangdoost
Effects of Voltage on Microstructure and Corrosion Resistance of Micro-arc Oxidation Ceramic Coatings Formed on KBM10 Magnesium Alloy
J. P. Lu, G. P. Cao, G. F. Quan, C. Wang, J. J. Zhuang, R. G. Song
Effect of 0.1 wt.% Co on the Hot Deformation and Toughness of Fine-Grained Low-Carbon Steel at Sub-zero Temperatures
Xiqin Liu, Shuangshuang Zhou, Zili Liu, Zhiguo Hou, Qingchao Tian
Tribological Performance of Ni3Al Matrix Self-Lubricating Composites Containing Multilayer Graphene Prepared by Additive Manufacturing
Zhao Yan, Xiaoliang Shi, Yuchun Huang, Xiaobin Deng, Xiyao Liu, Kang Yang
Tribological Properties of Surface-Textured and Plasma-Nitrided Pure Titanium Under Oil Lubrication Condition
Baosen Zhang, Qiangsheng Dong, Zhixin Ba, Zhangzhong Wang, Hancheng Shi, Yanting Xue
Effect of Applied Load and Sliding Speed on Tribological Behavior of TiAl-Based Self-Lubricating Composites
Xiyao Liu, Qiao Shen, Xiaoliang Shi, Jialiang Zou, Yuchun Huang, Ao Zhang, Zhao Yan, Xiaobin Deng, Kang Yang
Corrosion Behavior of Weathering Steel Under Thin Electrolyte Layer at Different Relative Humidity
Yan Xia, Pan Liu, Jianqing Zhang, Fahe Cao
Coating of Steel by Alkyd Resin Reinforced with Al2O3 Nanoparticles to Improve Corrosion Resistance
Shirin Kordzangeneh, Sanaz Naghibi, Hamideh Esmaeili
Porous Titanium Parts Fabricated by Sintering of TiH2 and Ti Powder Mixtures
Qin Peng, Bin Yang, Bernd Friedrich
Effects of Nd Addition on the Microstructure and Mechanical Properties of Extruded Mg-6Gd-2.5Y-0.5Zr Alloy
Liqun Guan, Yunlai Deng, Hongji Shi, Liu Yang, Mingan Chen
The Effect of SiC Addition on Microstructure and Mechanical Properties of Gas Tungsten Arc-Welded Ti-6Al-4V Alloy
Demian Langen, Hans Jürgen Maier, Thomas Hassel
A Study on Structural, Corrosion, and Sensitization Behavior of Ultrafine and Coarse Grain 316 Stainless Steel Processed by Multiaxial Forging and Heat Treatment
Seyed Rahim Kiahosseini, Seyyed Javad Mohammadi Baygi, Gholamreza Khalaj, Ali Khoshakhlagh, Razieh Samadipour
Vacuum Pressureless Sintering of Ti-6Al-4V Alloy with Full Densification and Forged-Like Mechanical Properties
Ce Zhang, Boxin Lu, Haiying Wang, Zhimeng Guo, Vladislav Paley, Alex A. Volinsky
Microstructural Evolution and Mechanical Properties of Ti-22Al-25Nb (At.%) Orthorhombic Alloy with Three Typical Microstructures
Wei Wang, Weidong Zeng, Yantao Liu, Guoxin Xie, Xiaobo Liang
Control of Carbon Content in Steel by Introducing Proeutectoid Ferrite Transformation into Hot-Rolled Q&P Process
Xiao-lei Li, Yun-jie Li, Jian Kang, Cheng-ning Li, Guo Yuan, Guo-dong Wang
Multiaxial Fatigue Life Prediction Based on Short Crack Propagation Model with Equivalent Strain Parameter
Xiang-Feng Zhao, De-Guang Shang, Yu-Juan Sun, Ming-Liang Song, Xiao-Wei Wang