Skip to main content
main-content
Top

Journal

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 1/2019

Issue 1/2019

Table of Contents ( 57 Articles )

13-11-2018 | Issue 1/2019

Influence of Cell Anisotropy and Relative Density on Compressive Deformation Responses of LM13-Cenosphere Hybrid Foam

Shyam Birla, D. P. Mondal, S. Das, Anurag Kulshrestha, S. L. Ahirwar, A. N. Ch. Venkat, Rajeev Kumar

14-11-2018 | Issue 1/2019

Laser Additive Manufacturing of (Ti-6Al-4V)/10 wt.% Ag Composite Using Spherical Powders to Reduce Wear and Friction

Xiaoxue Li, Kang Yang, Haibo Lin, Hongru Ma, Yukun Han, Qiang He

03-12-2018 | Issue 1/2019

Cathodic Cage Plasma Pre-treatment of TiN-Coated AISI-304 Stainless Steel for Enhancement of Mechanical Strength and Wear Resistance

H. A. Raza, M. Shafiq, M. Naeem, M. Y. Naz, J. C. Díaz-Guillén, C. M. Lopez-Badillo

10-12-2018 | Issue 1/2019

Effects of Heat Treatment on Microstructure, Mechanical Properties, Corrosion Resistance and Cytotoxicity of ZM21 Magnesium Alloy as Biomaterials

Dayue Jiang, Yilong Dai, Yu Zhang, Yang Yan, Jiaji Ma, Ding Li, Kun Yu

14-12-2018 | Issue 1/2019

Oxidation Behavior of Austenitic Steels in Supercritical Water Containing Dissolved Oxygen

Zhongliang Zhu, Hongyuan Li, Qiong Cao

04-12-2018 | Issue 1/2019

Micromechanical Modeling and Investigating the Effect of Particle Size and the Interface of Phases on the Mechanical Behavior of Dual-Phase Steels

Alireza Fallahi Arezodar, Ali Nikbakht

12-12-2018 | Issue 1/2019

Large-Scale Molecular Dynamics Simulation Studies on Deformation of Ni Nanowires: Surface Profile, Defects and Stacking Fault Width Analysis

Krishna Chaitanya Katakam, Pradeep Gupta, Natraj Yedla

18-12-2018 | Issue 1/2019

Evaluation of Plastic “Eta” Factor for Welds of SS316L(N) with High Strength Mismatch Ratio

R. Nikhil, S. A. Krishnan, G. Sasikala, B. Shashank Dutt, A. Moitra

18-12-2018 | Issue 1/2019

Constitutive Modeling for Hot Deformation Behavior of Al-5083 + SiC Composite

Amitava Rudra, Satyabrata Das, Rupa Dasgupta

19-12-2018 | Issue 1/2019

Elastic Modulus Estimation for Copper Syntactic Foams Reinforced with Iron Hollow Spheres of Different Wall Thicknesses

L. Pérez, M. Villalobos, C. Órdenes, R. A. L. Drew, C. Ruiz-Aguilar, I. Alfonso

15-11-2018 | Issue 1/2019

Microstructure Evolution and Mechanical Property of Low-Alloy Steel Used for Armor Layer of Flexible Pipe During Thermomechanical Process and Hot Rolling Process

Zhenguang Liu, Shoudong Chen, Xiuhua Gao, Guanqiao Su, Linxiu Du, Jianping Li, Xiaonan Wang, Xiaowei Zhou

07-11-2018 | Issue 1/2019

Development and Mechanical Properties of In Situ Al3Ti-Reinforced Nanostructured AA6061 via Mechanical Alloying

Versha Goyal, Rahul Ravi, S. R. Bakshi, P. R. Soni

14-11-2018 | Issue 1/2019

Workability Characteristics and Deformation Mechanisms of Die-Cast AM60 and AZ91 Magnesium Alloys: Correlation with Processing Maps

Dharmendra Chalasani, Mukesh Kumar Jain, Sumanth Shankar, Fateh Fazeli

12-11-2018 | Issue 1/2019

Microstructure and Mechanical Property Improvement in Laser-Welded TC4 Titanium Alloy and 301L Stainless Steel Joints Without Filler Metal

Yan Zhang, Da-Qian Sun, Xiao-Yan Gu, Hong-Mei Li

05-12-2018 | Issue 1/2019

Experimental and Numerical Analyses of the Consolidation Process of AA 7075–2 wt.% ZrO2 Powders by Equal Channel Angular Pressing

S. E. Hernández-Martínez, J. J. Cruz-Rivera, C. G. Garay-Reyes, J. L. Hernández-Rivera

06-12-2018 | Issue 1/2019

Ultra-Shallow Doping B, Mg, Ni, Cu, Mn, Cr and Fe into SiC with Very High Surface Concentrations Based on Plasma Stimulated Room-Temperature Diffusion

Ruixiang Hou, Lei Li, Xin Fang, Hui Zhao, Yihang Chen, Ziang Xie, Guosheng Sun, Xinhe Zhang, Yanfei Zhao, Rong Huang, Zengli Huang, Youqin He, Nongnong Ma, Jicai Zhang, Wanjing Xu, Jinbo Yang, Chijie Xiao, G. G. Qin

17-12-2018 | Issue 1/2019

Experimental Investigations for Optimizing the Extrusion Parameters on FDM PLA Printed Parts

Leipeng Yang, Shujuan Li, Yan Li, Mingshun Yang, Qilong Yuan

17-12-2018 | Issue 1/2019

Optimization of Tensile and Corrosion Properties of Dissimilar Friction Stir Welded AA2024-7075 Joints

Chenghang Zhang, Guangjie Huang, Yu Cao, Xiaodong Wu, Xinde Huang, Qing Liu

10-12-2018 | Issue 1/2019

Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy

Abdrakhman Naizabekov, Sergey Lezhnev, Evgeniy Panin, Irina Volokitina, Alexandr Arbuz, Toncho Koinov, Igor Mazur

19-12-2018 | Issue 1/2019

Surface Self-nanocrystallization in Copper Electroforming

Chunjian Shen, Zengwei Zhu, Di Zhu

14-12-2018 | Issue 1/2019

Fabrication and Characterization of Core–Shell Density-Graded 316L Stainless Steel Porous Structure

Morteza Mirzaei, Mohammad Hossein Paydar

14-12-2018 | Issue 1/2019

Design and Development of Galvannealed Dual-Phase Steel: Microstructure, Mechanical Properties and Weldability

Sourabh Chatterjee, Soumyajit Koley, Rudra Bubai Sarkar, Nibedita Behera, Manindra Manna, Subrata Mukherjee, Saurabh Kundu

17-12-2018 | Issue 1/2019

Mechanical Alloying and Powder Forging of 18%Cr Oxide Dispersion-Strengthened Steel Produced Using Elemental Powders

D. Kumar, U. Prakash, V. V. Dabhade, K. Laha, T. Sakthivel

17-12-2018 | Issue 1/2019

Role of Si in the Surface Damage Mechanism of RB-SiC/Si Under Mechanical Loading

Quanli Zhang, Zhen Zhang, Honghua Su, Qingliang Zhao, Suet To

17-12-2018 | Issue 1/2019

EBSD Study on Processing Domain Parameters of Oxide Dispersion Strengthened 18Cr Ferritic Steel

Manmath Kumar Dash, S. Saroja, Rahul John, R. Mythili, Arup Dasgupta

17-12-2018 | Issue 1/2019

Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering

Fang Yang, Haiying Wang, Li You, Alex A. Volinsky, Ce Zhang, Zhimeng Guo, Yanli Sui

18-12-2018 | Issue 1/2019

Solidification Characteristics of Silicon-Alloyed Ductile Cast Irons

Stelian Stan, Iulian Riposan, Mihai Chisamera, Iuliana Stan

18-12-2018 | Issue 1/2019

Microstructure and Corrosion Properties of Laser-Welded SAF 2507 Super Duplex Stainless Steel Joints

Kai Qi, Ruifeng Li, Guangjin Wang, Gangzhi Li, Bin Liu, Mingfang Wu

18-12-2018 | Issue 1/2019

Development of a Novel Cr21 Lean Duplex Stainless Steel and Its Hot Deformation Behavior

Yan Zhao, Yuan Wang, Shuai Tang, Weina Zhang, Zhenyu Liu

13-11-2018 | Issue 1/2019

A Systematic Study on the Dynamic Softening Behavior of a Heat-Resistant Alloy Considering Thermal and Microstructural Effects

Weicheng Jiang, Li Ruihong, Fengzhi Wu, Ye Cheng, Hongying Wang, Zhigang Li, WanHui Liu, AiLian Bao

12-11-2018 | Issue 1/2019

Variation in Morphology and Kinetics of Granular Bainite with Welding Thermal Cycles in High-Nb Fire-Resistant Steel: Experiments and Theoretical Calculations

Z. P. Qin, H. H. Wang, Z. Tong, R. D. K. Misra, L. Li, W. Deng

12-11-2018 | Issue 1/2019

Study on the Deformation Homogeneity and Electrical Conductivity in Co-Cr-Ni-Mo Wires Drawn with Different Drawing Practices

Sai Srikanth Gvk, M. J. Tan, Zhenyun Liu

13-11-2018 | Issue 1/2019

Influence of Bias Voltage and CH4/N2 Gas Ratio on the Structure and Mechanical Properties of TiCN Coatings Deposited by Cathodic Arc Deposition Method

Nikolay Petkov, Egor Kashkarov, Aleksei Obrosov, Totka Bakalova, Pavel Kejzlar, Hristo Bahchedzhiev

26-11-2018 | Issue 1/2019

Quantitative Evaluation of the Interaction Between Wear and Corrosion on Mg-3Gd-1Zn Alloy in Simulated Body Fluid

Xiaobo Zhang, Jianwei Dai, Jie Zhang, Yunqiang Bai

26-11-2018 | Issue 1/2019

Tribo-corrosion and Albumin Attachment of Nitrogen Ion-Implanted CoCrMo Alloy During Friction Onset

Xueyan Yan, Jie Meng, Kewei Gao, Xiaolu Pang, Alex A. Volinsky

04-12-2018 | Issue 1/2019

Investigation of the Edge Crack Sensitivity of Cold Rolled Hot-Dip Galvanized DP780 Steels

Yun Han, Xingrong Chu, Shuang Kuang, Tao Li, Chunqian Xie, Huaxiang Teng

30-11-2018 | Issue 1/2019

Microstructure, Phase Transformation, Mechanical Behavior, Bio-corrosion and Antibacterial Properties of Ti-Nb-xSn (x = 0, 0.25, 0.5 and 1.5) SMAs

Mustafa K. Ibrahim, E. Hamzah, Safaa N. Saud

06-12-2018 | Issue 1/2019

Influence of Ca and Sr Addition on Impression Creep Behavior of Mg-4Al-RE Alloy

Yaocheng Zhang, Li Yang, Chenglin Ge, Song Pang, Xiaopin Wang, Zhiwei Zhang, Zhaoxia Han

11-12-2018 | Issue 1/2019

Constitutive Model Over Wide Temperature Range and Considering Negative-to-Positive Strain Rate Sensitivity for As-Quenched AA2219 Sheet

Z. X. Li, M. Zhan, X. G. Fan, F. Ma, J. W. Wang

11-12-2018 | Issue 1/2019

Tribocorrosion Behavior of SAF 2205 Duplex Stainless Steel in Artificial Seawater

Ruipeng Gao, Eryong Liu, Yingxin Zhang, Lufa Zhu, Zhixiang Zeng

10-12-2018 | Issue 1/2019

Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe2O4/Nano-TiN Ceramics

Bin Wang, Jinjing Du, Shoukun Gao, Zhao Fang, Jun Zhu, Linbo Li

10-12-2018 | Issue 1/2019

The Effect of Jet Flow Impingement on the Corrosion Products Formed on a Pipeline Steel in Naturally Aerated Sour Brine

M. A. Domínguez-Aguilar, M. Díaz-Cruz, A. Cervantes-Tobón, B. Castro-Domínguez

13-12-2018 | Issue 1/2019

Understanding the Mechanism of Dynamic Recrystallization During High-Temperature Deformation in Nb-1Zr-0.1C Alloy

Atanu Chaudhuri, Apu Sarkar, Rajeev Kapoor, J. K. Chakravartty, R. K. Ray, Satyam Suwas

10-12-2018 | Issue 1/2019

High-Temperature Oxidation of Stellite 12 Hardfacings: Effect of Mo on Characteristics of Oxide Scale

Amir Motallebzadeh, Shaikh Asad Ali Dilawary, Erdem Atar, Huseyin Cimenoglu

11-12-2018 | Issue 1/2019

Effects of Vanadium on Modification of Iron-Rich Intermetallics and Mechanical Properties in A356 Cast Alloys with 1.5 wt.% Fe

Bo Lin, Haoyu Li, Rui Xu, Huaqiang Xiao, Weiwen Zhang, Shaobo Li

14-12-2018 | Issue 1/2019

The Effect of Chemical Composition and Processing Technology on the Microstructure, Texture and Earing Behavior of DR Tinplate

Xiao-fei Zheng, Lu-hai Liao, Yong-lin Kang, Wei Liu, Quan-quan Qiu

17-12-2018 | Issue 1/2019

Microstructure and Mechanical Characterization of Friction-Stir-Welded 316L Austenitic Stainless Steels

R. Ramesh, I. Dinaharan, Ravi Kumar, E. T. Akinlabi

14-12-2018 | Issue 1/2019

ZrB2-SiC-Ta4HfC5/Ta4HfC5 Oxidation-Resistant Dual-Layer Coating Fabricated by Spark Plasma Sintering for C/C Composites

Changling Zhou, Yushi Qi, Yehong Cheng, Wenbo Han

17-12-2018 | Issue 1/2019

Feasibility of Using Steel Drums for the Confinement of Burned Low-Level Radioactive Waste Ashes

Gustavo S. Duffó, Silvia B. Farina, Fátima M. Schulz, Francesca Marotta

17-12-2018 | Issue 1/2019

Graphene-Reinforced Aluminum Hybrid Foam: Response to High Strain Rate Deformation

Sourav Das, Sanjeev Khanna, D. P. Mondal

19-12-2018 | Issue 1/2019

Electromagnetic Wave-Absorbing Properties of Steel Slag

Yinsuo Dai, Jianhua Wu, Derong Wang, Rui Li, Chunhua Lu, Zhongzi Xu

18-12-2018 | Issue 1/2019

Effects of Torsional Deformation on the Mechanical Properties and Microstructures of a Commercial Pure Copper

Ji Gu, Song Ni, Min Song

18-12-2018 | Issue 1/2019

Effects of Co3O4 Addition on Friction and Dry Sliding Wear Characteristics of 8 mol% Yttria-Stabilized Cubic Zirconia

Bulent Aktas, Hakan Tekin

19-12-2018 | Issue 1/2019

Fabrication, Analysis of Microstructure and Oxidation Resistance of Cemented C/C Composites by Laser

Jorge A. Ramos-Grez, David L. Bourell, Madhavrao Govindaraju

06-12-2018 | Issue 1/2019

Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25V Steel

Song Huang, Zhiping Chen, You Li, Delin Zhang

14-12-2018 | Issue 1/2019

The Effect of Bainite Type on the Evolution of Carbide Constituent During an Accelerated Aging in Cr-Mo-V Steel

Yongtao Zhang, Peng Luo, Haitao Yan, Hanqian Zhang, Jinfu Li

18-12-2018 | Issue 1/2019

Effect of Cold Deformation and Heat Treatment on the Microstructure and Mechanical Behavior of High Entropy Alloy CuCrFeNi2Al0.5

Jinhong Pi, Changfu Yu, Chao Sun, Hailong Du, Yinlong Fan, BaoSen Zhang, Shaofeng Yang

Current Publications

Premium Partner

    Image Credits