Issue 11/2018
Content (65 Articles)
The Effects of Low Frequency on the Microstructure and Mechanical Properties of High-Strength Al-Mg Aluminum Alloys by Wire and Double-Pulsed Arc Additive Manufacturing
Yuehai Feng, Lei He, Kehong Wang, Xuanyu E
Reducing Intermetallic Compounds of Mg/Al Joint in Friction Stir Lap Welding
Z. L. Liu, K. Yang, S. D. Ji
Laser Powder Deposition Parametric Optimization and Property Development for Ti-6Al-4V Alloy
Yang Liu, Chao Liu, Wensheng Liu, Yunzhu Ma, Cheng Zhang, Chaoping Liang, Qingshan Cai
Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach
G. K. Mandal, K. Ashok, S. K. Das, P. Biswas, R. B. Sarkar, R. Sundara Bharathy, V. C. Srivastava
Influence of Rotation Rate on Microstructure and Comprehensive Performance of FSWed Mg Alloy
Yajie Li, Fengming Qin, Cuirong Liu, Leijun Li, Zhisheng Wu
Microstructure and Mechanical Properties of Cast Al-5Zn-2Mg Alloy Subjected to Equal-Channel Angular Pressing
G. K. Manjunath, G. V. Preetham Kumar, K. Udaya Bhat, Prashant Huilgol
Influence of Annealing on the Properties of Explosively Welded Titanium Grade 1—AW7075 Aluminum Alloy Bimetals
Miroslav Sahul, Martin Sahul, Ján Lokaj, L’ubomír Čaplovič, Petr Nesvadba
Mechanical and Tribological Behavior of Multiwalled Carbon Nanotubes-Reinforced AA7075 Composites Prepared by Powder Metallurgy and Hot Extrusion
M. Jagannatham, M. S. Senthil Saravanan, K. Sivaprasad, S. P. Kumaresh Babu
Grain Refinement, Microstructure and Mechanical Properties Homogeneity of Mg-Gd-Y-Nd-Zr Alloy During Multidirectional Forging
Xiangsheng Xia, Changpeng Wang, Yang Wu, Kui Zhang, Minglong Ma, Baoguo Yuan
High Wear-Resistant Aluminum Matrix Composite Layer Fabricated by MIG Welding with Lateral B4C Powder Injection
Jianxin Sun, Ping Shen, Daxin Zeng
Effect of Minor Er on the Microstructure and Properties of Al-6.0Mg-0.4Mn-0.1Cr-0.1Zr Alloys
Hailong Chen, Tianfu Yu, Zhongyuan Qi, Ruizhi Wu, Guojun Wang, Xinyu Lv, Fuguan Cong, Legan Hou, Jinghuai Zhang, Milin Zhang
Effect of Base Metal Misorientation on Single-Crystal Superalloy Transient Liquid-Phase Bonded Joints
Lu Chai, Jinbao Hou, Bo Lang
Problem of Identification of Phase Transformation Models Used in Simulations of Steels Processing
Łukasz Rauch, Daniel Bachniak, Roman Kuziak, Jan Kusiak, Maciej Pietrzyk
Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique
Surajit Kumar Paul, Satish Roy, S. Sivaprasad, H. N. Bar, S. Tarafder
Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247
A. M. S. Costa, E. Hawk, J. Dansbury, C. A. Nunes, G. E. Fuchs
The Compactibility of Unsaturated Titanium Hydride Powders
Yuhang Wei, Chunming Wang, Yeguang Zhang, Libo Mei, Sufen Xiao, Yungui Chen
Strengthening of C/SiC Composites by Electrophoretic Deposition of CNTs on a SiC Coating
Kun Yang, Hui Mei, Daoyang Han, Laifei Cheng
Achieving Excellent Strength–Ductility and Impact Toughness Combination by Cyclic Quenching in Medium Mn TRIP-Aided Steel
Lei Zhang, Xingmin Huang, Yanhua Wang, Yuanbo Guo, Guangze Dai, Dongsheng Li
Effect of Surface Treatment on Bio-corrosion in Aluminum Alloy 2024-T3
K. Nishchitha, M. K. Deepa, B. G. Prakashaiah, J. N. Balaraju, B. E. Amitha rani
An Exceptional Synergy of High Strength, Ductility and Toughness in a Gradient-Structured Low-Carbon Steel
Yindong Shi, Lina Wang, Yulong Zhang, Hailong Xie, Yajun Zhao
Pitting Corrosion of 10Ni8CrMoV High-Strength Steel Induced by a Potential Perturbation
Lin Fan, Kangkang Ding, Penghui Zhang, Weimin Guo, Kun Pang, Likun Xu
Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding
Keng Yan, Tianyu Wang, Haimei Liang, Yong Zhao
Sliding Wear of Spark Plasma Sintered CrFeCoNiCu High-Entropy Alloy Coatings: Effect of Aluminum Addition
Xiulin Ji, S. Habib Alavi, Sandip P. Harimkar, Yingtao Zhang
Design and Performance Evaluation of Al2O3-SiC Composite for Direct-Bonded Copper Substrate
S. S. Akhtar, K. T. Lemboye, A. F. M. Arif, K. S. Al-Athel
Experimental Validation of Numerical Simulations of a New-Generation NiTi Endodontic File Under Bending
Valérie Chevalier, Laurent Pino, Reza Arbab Chirani, Sylvain Calloch, Shabnam Arbab Chirani
The Selection of Heat Treatment Parameters to Obtain Austempered Ductile Iron with the Required Impact Strength
Dorota Wilk-Kołodziejczyk, Krzysztof Regulski, Tomasz Giętka, Grzegorz Gumienny, Krzysztof Jaśkowiec, Stanisława Kluska-Nawarecka
Study on Microstructure and Properties of AZ31/6061 GTAW Butt Joints According to Mg-Cd-Al Ternary System
Liming Liu, Xinze Lv, Hongyang Wang
Corrosion-Resistant Hydrophobic Nanostructured Ni-Reduced Graphene Oxide Composite Coating with Improved Mechanical Properties
S. Kumari, A. Panigrahi, S. K. Singh, S. K. Pradhan
Effect of Tempering and Rolling on Fatigue Crack Growth Behavior of Modified 9Cr-1Mo Steel
S. S. Samant, I. V. Singh, R. N. Singh
Effect of Orientation of Weld Line on Formability of Electron Beam-Welded Dissimilar Thickness Titanium Sheets
P. S. Lin Prakash, Sunil Kumar Biswal, Gour Gopal Roy, Maha Nand Jha, Martin Mascarenhas, Sushanta Kumar Panda
Microstructural Characterization and Electrochemical Behavior of AA2014 Al-Cu-Mg-Si Alloy of Various Tempers
K. S. Ghosh, Kapil Tripati
Micro-crack Pinning and Interfacial Fracture in Mixed Metal Oxide Reinforced Epoxy Nanocomposite
Ramakrishna Vasireddi, D. Roy Mahapatra
Antifouling Properties and Release of Dissolved Copper of Cold Spray Cu/Cu2O Coatings for Ships and Steel Structures in Marine Environment
Rui Ding, Xiangbo Li, Jia Wang, Weihua Li, Xiao Wang, Taijiang Gui
Hygrothermal Effect on Composites Under In-Plane Fatigue at Stress Ratios of R = −1 and R = 0.1: An Analysis of Quasi-Isotropic Stitched Carbon Fibers
Marcos Yutaka Shiino, Guilherme Silva Moraes de Siqueira, Maria Odila Hilário Cioffi, Sérgio Roberto Montoro, Maurício Vicente Donadon
Analyzing the Effect of CeB6 on Microstructure and Mechanical Properties of High-Speed Steel Consolidated by Powder Metallurgy
Qi Ouyang, Peng Luo, Fengli Zhang, Qinqiu He, Ying Wang, Songlin Li
Hybrid CFRP/SWCNT Composites with Enhanced Electrical Conductivity and Mechanical Properties
Mikhail Burkov, Alexander Eremin
Effects of Mg Content on the Fatigue Strength and Fracture Behavior of Al-Si-Mg Casting Alloys
Ming-Ze Wu, Ji-Wang Zhang, Yan-Bin Zhang, Hua-Qiang Wang
Study on Texture Evolution and Shear Behavior of an Al/Ni/Cu Composite
Ali Shabani, Mohammad Reza Toroghinejad
Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium
Amlan Kar, Satish V. Kailas, Satyam Suwas
Formation of Lamellar Carbides in Alloy 617-HAZ and Their Role in the Impact Toughness of Alloy 617/9%Cr Dissimilar Welded Joint
Kai Ding, Peng Wang, Xia Liu, Xiaohong Li, Bingge Zhao, Yulai Gao
Mechanical and Tribological Behavior of ZrB2-TiB2 System Prepared by Mechanical Activation Spark Plasma Sintering Technique
S. Mondal, S. Chakraborty, S. Das
The Determination of Residual Stress in Quenched and Cold-Compressed 7050 Aluminum Alloy T-Section Forgings by the Contour Method and Neutron Diffraction
Xiaolong Liu, Robert C. Wimpory, Hai Gong, Yuntao Liu, Dongfeng Chen, Yaoqiong Liu, Yunxin Wu, Chen Li
Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels
Rasoul Pouriamanesh, Kamran Dehghani, Rudolf Vallant, Norbert Enzinger
Microstructure and Performance of Nano-WC Particle-Strengthened Ni Coatings by Electro-brush Plating
Xiaoben Qi, Ying Wang, Cong Wang, Rulin Zhang
Corrosion Performance of Composite MAO/TiO2 Sol–Gel Coatings on Magnesium Alloy AZ91D
Zhang Na, Yu Shengxue, Xing Qian, Chen Xiaolei, Zhang Mingxian, Shen Dejiu
Fracture Analysis of ARB-Processed CP-Ti Sheets Under Unidirectional Tensile Loading
M. Karimi, M. R. Toroghinejad, J. Dutkiewicz
Dry-Sliding Tribological Properties of TiAl Alloys and Ti2AlN/TiAl Composites at High Temperature
Ningbo Zhang, Dongli Sun, Xiuli Han, Daqun Wang, Qing Wang, Hao Liu, Zhenhe Yu
A Hybrid Plasma Treatment of H13 Tool Steel by Combining Plasma Nitriding and Post-Oxidation
J. C. Díaz-Guillén, M. Alvarez-Vera, J. A. Díaz-Guillén, J. L. Acevedo-Davila, M. Naeem, H. M. Hdz-García, E. E. Granda-Gutiérrez, R. Muñoz-Arroyo
Influence of Dynamic Three Point Bending on the Work Hardening Capacity of T105Mn120 Manganese Steel
V. Bulbuc, B. Pricop, F. Maxim, M. Popa, N. Cimpoeşu, L. G. Bujoreanu
Enhanced Strength of 304 SS-Ti6Al4V Laser-Welded Joints Containing Composite Interlayers
Seyed Reza Elmi Hosseini, Kai Feng, Pulin Nie, Ke Zhang, Jian Huang, Zhuguo Li, Hiroyuki Kokawa, Baochao Guo, Song Xue
Semiempirical Formulae for Mechanical Properties Controlled by Strength and Ductility of Power-Law Hardening Metallic Materials
Yandong Hu, Zhi-Zhong Hu, Shu-Zhen Cao
The Influence of Pr and Nd Substitution on Hydrogen Storage Properties of Mechanically Alloyed (La,Mg)2Ni7-Type Alloys
M. Balcerzak, M. Nowak, M. Jurczyk
Surface and Electrochemical Characteristics of Novel Chromate-Free Mn-V Oxyanion Sealed Tartaric–Sulfuric Acid Anodized Coating
G. Yoganandan, J. N. Balaraju, N. T. Manikandanath, V. Ezhilselvi, Meenu Srivastava, K. V. Nagacharan, A. R. Anilchandra, C. M. Manjunatha
Microstructure and Deformation Mechanism of AZ31 Magnesium Alloy Under Dynamic Strain Rate
Chao Lou, Qi Sun, Qingshan Yang, Yi Ren, Zhengyuan Gao, Xiyan Zhang
Comparison of Different Processing Routes for the Synthesis of Semiconducting AlSb
Anirudha Karati, M. Vaidya, B. S. Murty
Effect of Initial Microstructure on Properties of Cryorolled Al 5052 Alloy Subjected to Different Annealing Treatment Temperatures
N. M. Anas, B. K. Dhindaw, H. Zuhailawati, T. K. Abdullah, A. S. Anasyida
Effect of Boron Content on Microstructure, Mechanical Properties, and Oxidation Resistance of Mo-Si-B Composites
Jianhui Yan, Jinxin Huang, Kailing Li, Peng Zhou, Yi Wang, Jingwen Qiu
Electrochemical Corrosion Behavior of Plasma-Sprayed FeCrNiMoCBSi Amorphous/Nanocrystalline Coatings in Simulated Seawater Medium
Baosen Zhang, Qiangsheng Dong, Zhixin Ba, Shuaishuai Zhu, Yujun Han, Zhangzhong Wang
Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloys with Different Morphologies of Long-Period Stacking Ordered Phases
Xiaojie Zhou, Chuming Liu, Yonghao Gao, Shunong Jiang, Zhiyong Chen
Study on Corrosion Behavior of 7075 Aluminum Alloy with Retrogression and Reaging Using Taguchi Method
Rongde Li, Tong Liu, Ruiming Su, Jianhao Su, Yingdong Qu