Journal of Materials Engineering and Performance 11/2022

14-06-2022 | Technical Article

Evolution during Hot Rolling and Control by Thermomechanical Control Process of Surface Decarburization on 38Si7 Spring Steel

Jiaxing Liu, Bo Jiang, Chaolei Zhang, Guizhi Li, Yonggang Dai, Lie Chen

26-04-2022 | Technical Article

The Effect of Bainite Volume Fraction on Wear Behavior of AISI 4340 Ferrite–Bainite Dual-Phase Steel

Masoud Safarpour, Aliakbar Ekrami

13-05-2022 | Technical Article

Effect of Al Addition on the Rolled Microstructure and Mechanical Properties of Mg-4Y-3Nd Alloys

Yang Cao, Lei Wang, Erjun Guo, Yicheng Feng, Sicong Zhao, Yuanke Fu

16-05-2022 | Technical Article

Microstructure Characteristics and Strengthening Mechanism of Martensitic Steel at Two Quenching Rates

Chunhui Li, Xiaoyuan Li, Wenchao Yu, Jie Shi, Maoqiu Wang, Run Wu

08-07-2022 | Technical Article

Effect of Equiatomic Ti/Zr Substitution on the Shape Memory Effect of Biomedical Ti-Zr-Mn-Mo Alloys

Hui Liu, Jinzhi Li, Weiji Lai, Xueyang Zhao, Wei Li, Xiaojian Wang

22-04-2022 | Technical Article

Back-Face-Signature-Monitored Evaluation of Foam-Sandwich Structures as Shock Mitigating Materials

Mahesh Thorat, Shiba N. Sahu, Viren Menezes, Amol A. Gokhale

09-05-2022 | Technical Article

Insight into the Corrosion Resistance Deterioration and Corrosion Film Transformation of Ti6321 Weldment in a Simulated Deep Sea Environment

Shunchang Gao, Lin Fan, Zhen Li, Xuehan Bai, Li Ma, Mingxian Sun

09-08-2022 | Correction

Correction to: Insight into the Corrosion Resistance Deterioration and Corrosion Film Transformation of Ti6321 Weldment in a Simulated Deep Sea Environment

Shunchang Gao, Lin Fan, Zhen Li, Xuehan Bai, Li Ma, Mingxian Sun

18-04-2022 | Technical Article

On 3D-Printed Acrylonitrile Butadiene Styrene-Based Sensors: Rheological, Mechanical, Morphological, Radio Frequency, and 4D Capabilities

Chahat Jain, Balwinder S. Dhaliwal, Rupinder Singh

25-04-2022 | Technical Article

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

Nan Li, Fengguo Zhang, Qing Yang, Yi Wu, Mingliang Wang, Jun Liu, Lei Wang, Zhe Chen, Haowei Wang

20-05-2022 | Technical Article

Wear, Corrosion, and Biocompatibility of 316L Stainless Steel Modified by Well-Adhered Ta Coatings

Jie Gao, Yan Cao, Yong Ma, Ke Zheng, Meng Zhang, Hongjun Hei, Huarong Gong, Shengwang Yu, Pingyu Kuai, Kechang Liu

25-04-2022 | Technical Article

Mechanical and Thermal Properties of Cu-25wt.%Fe-25wt.%Nb Composite Sintered by Spark Plasma

L. T. S. Soffner, B. F. de Oliveira, C. S. de Carvalho, M. E. Soffner, M. Filgueira

28-04-2022 | Technical Article

Industrial Arc Ion Plating and Unbalanced Magnetron Sputtering Coating Deposition: Static and Fatigue Performances of TiAlN-Coated SKH51 Tool Steel

Noriyo Horikawa, Benjamin Guennec, Takaharu Kashi, Toshiro Miyajima, Takahiro Kinoshita, Shigeki Okamura, Akiyoshi Sakaida, Yuki Kawano, Yoshiro Iwai

21-04-2022 | Technical Article

Microstructure and Properties of Jet Pulse Electrodeposited Ni-TiN Nanocoatings

Qiang Li, Fafeng Xia, Guifen Liu, Liming Yao

04-05-2022 | Technical Article

An Investigation of the Role of Calcium in the Microstructure of Mg-5Al-4Sn-Based Alloys and Pitting Corrosion Resistance

Nguyen Phan Anh, Lai Xuan Bach, Casen Panaitescu, Le Van Sy, Nam Nguyen Dang

25-05-2022 | Technical Article

Studies on Microstructure, Mechanical Properties, and Corrosion Behavior, of Partially Open-Cell Magnesium Foam through Powder Metallurgy Route

Sangeeta Shrivas, Ashutosh pandey, Ruchi Dubey, M. Muhamad Shafeeq, Garuav Gupta, D. P. Mondal

29-04-2022 | Technical Article

Effects of Rolling and Aging Treatment on Texture and Anisotropy of Fe-Si-Mn Aluminum Alloy Sheet

Liu Xia, Chun Xu, Yafei Wang, Zhonghu Hao, Aigang Pan, Weichao Wu

27-04-2022 | Technical Article

Microstructure and Wear Behavior of Self-Lubricating Microwave Clads Deposited on Titanium Alloy

Suresh Gudala, M. R. Ramesh, M. S. Srinath

11-05-2022 | Technical Article

Tensile Property and Failure Behavior of Copper/Aluminum Dissimilar Friction Stir Welding at Elevated Temperatures

Tran Hung Tra, Duong Dinh Hao, Masakazu Okazaki, Do Quang Thang, Dang Quoc Khanh, Quach Hoai Nam

11-05-2022 | Technical Article

Insight into the Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Mg Alloys from the Microstructures in PEO Coatings

Zhenning Chen, Xiaoqian Geng, Xingyue Yong, Xiaochun Chen

26-04-2022 | Technical Article

Electrochemical Study of Anodized AZ31 Magnesium Alloy (Mg/MgO) Immersed under Watered Cementice Paste

C. H. Ortiz, W. Aperador, J. C. Caicedo

21-04-2022 | Technical Article

Novel Approach for the Synthesis of Highly Corrosion Resistant and Electrically Conductive Cerium Hexaboride Coating

Hossein Hassannejad, Ashkan Nouri, Seyed Ahmad Lajevardi, Fatemeh Kh. Molavi

09-05-2022 | Technical Article

γ' Phase in a New Fe-Based Superalloy

Li-min Wang

11-05-2022 | Technical Article

Effect of Ni Addition on the Microstructure and Mechanical Properties of 6101 Aluminum Alloy with High Electrical Conductivity

Jiajun Huang, Xiong Zhou, Jialin Guo, Hengbin Liao, Jun Du

18-04-2022 | Technical Article

The Effect of Extrusion Ratio on the Corrosion Resistance of Ultrafine-Grained Mg-4Li-3Al-Zn Alloy Deformed Using Extrusion with a Forward-Backward Oscillating Die

Anna Dobkowska, Milena Koralnik, Bogusława Adamczyk-Cieślak, Dariusz Kuc, Witold Chromiński, Jiri Kubasek, Jarosław Mizera

Open Access 12-05-2022 | Technical Article

Effect of Temperature on Sliding Wear Behavior of Ti-6Al-4V Alloy Processed by Powder Bed Fusion Additive Manufacturing Techniques

Hua Li, Zhan Wen Chen, Maziar Ramezani

Download PDF-version View full text

09-06-2022 | Technical Article

Flux-Cored Wire for Arc Additive Manufacturing of Alloy Steel: Effect of Inclusion Particles on Microstructure and Properties

Min Zhang, Shuai Xu, Qiaoling Chu, Boyu Wang, Lisheng Zhang, Xiaoyu He, Xiongwei Tong, Lin Zhang

27-04-2022 | Technical Article

Influence of Pin Profile on Mechanical, Microstructure and Texture Characteristics of Friction Stir Welded Elektron 21 Alloy

B. Pranesh, P. Tamilselvam, K. S. Suresh, T. Ram Prabhu

25-04-2022 | Technical Article

Role of BaZrO3 Phase on Microstructure and Ionic Conductivity of 8YSZ

Bulent Aktas, Suleyman Tekeli, Serdar Salman

24-05-2022 | Technical Article

The Formability, Microstructure, and Mechanical Properties of Powder-Sintered TC4 Alloy Hollow Shafts Formed by Cross-Wedge Rolling

Pengni Feng, Baoyu Wang, Cuiping Yang, Zhidong Ju, Huibo Zhang

12-05-2022 | Technical Article

Surface Integrity and Core Loss in Lamination Coated Thin Sheets of M-43 Grade Cold Rolled Non-grain-Oriented Electrical Steel

Nitin Kumar Lautre, Bhushan Y. Dharmik

10-05-2022 | Technical Article

A Comparative Study on the Degradation Properties of Mg Wire/Poly(lactic acid) Composite Rods: Influence of Rod Diameter

Hong Cai, Xuan Li, Kang Yin, Bing Han, Wentong Gao, Feng Xue

Open Access 29-04-2022 | Technical Article

Influence of Titanium on the Microstructure and Mechanical Properties of Foundry Zinc Alloy

Piotr Dudek, Justyna Piwowońska

Download PDF-version View full text

09-05-2022 | Technical Article

Ta Effect on Structural, Mechanical and Tribological Properties of TiCN Coatings

Özlem Baran Acımert, Sedat Çavlan, Ayşenur Keleş Dayauç, Lynne Hopkins

04-05-2022 | Technical Article

Development of Microstructural Heterogeneity in 304 LN Austenitic Stainless Steel: Effect of Temperature and Strain

Amrita Kundu, David P. Field, Pravash Chandra Chakraborti, Parvej Raut

18-05-2022 | Technical Article

Dilatometric and Microstructural Investigations on Austenite Decomposition under Continuous Cooling Conditions in a Cu-Bearing High-Strength Low-Alloy Steel

Atul Kumar, Lambodar Sahoo, Deepak Kumar, Vajinder Singh, K. Gopinath, R. Balamuralikrishnan

02-05-2022 | Technical Article

Residual Stress Distribution and Dynamic Stress Variation in Aluminum Alloy Round Rods after Laser Shock Peening

Boyu Sun, Jibin Zhao, Hongchao Qiao, Ying Lu

09-05-2022 | Technical Article

Influence of Reinforcement Particles on Dynamically Recrystallized Grain of Hot Upset Sintered Al-B4C Composites

R. Seetharam, S. Kanmani Subbu, M. J. Davidson, K. R. Ramkumar, Pagidi Madhukar

27-04-2022 | Technical Article

Coupling Between Ductile Damage Evolution and Phase Transition in Single Crystal Niobium Subjected to High Strain Rate Loading

Zhongpeng Qi, Fang Wang, Xiangguo Zeng, Liu He, Jin Wang, Xin Yang, Yuntian Wang

03-05-2022 | Technical Article

Investigation on Mechanical Properties and Energy Absorption Capabilities of AlSi10Mg Triply Periodic Minimal Surface Sheet Structures Fabricated via Selective Laser Melting

Qidong Sun, Jie Sun, Kai Guo, Jiangwei Liu

13-04-2022 | Technical Article

Powder Metallurgy versus Casting: Damping Behavior of Pure Aluminum

Shoba Chintada, Siva Prasad Dora, Dorathi Kare, Srinivasa Rao Pujari

20-05-2022 | Technical Article

Study of E690 Steel Corrosion in Seawater Containing Methanogenic Archaea

Shiqiang Chen, Hao Deng, Jiarun Li, Ning Wang, Guangzhou Liu

25-04-2022 | Technical Article

Study for Characterizing Grinding Burn of 1045 Steel Based on Nonlinear Ultrasonic Coefficients

Hanying Mao, Yukun Liu, Hanling Mao, Juncheng Fu, Yan Tang, Xiaokang Li

Open Access 28-04-2022 | Technical Article

Corrosion Effect on the Efficiency of High-Frequency Mechanical Impact Treatment in Enhancing Fatigue Strength of Welded Steel Structures

Hassan Al-Karawi

Download PDF-version View full text

16-05-2022 | Technical Article

Early Fatigue Crack Damage Identification by Multi-classification Support-Vector Machine Based on Lamb Wave and Temperature Compensation

Gaozheng Zhao, Changchao Liu, Mingshun Jiang, Lei Jia, Qingmei Sui

03-05-2022 | Technical Article

Dynamic Behavior of Cu/Al-Laminated Metal with Impedance Mismatch

Yan-Shu Fu, Ke-Xin Luo, Peng-Long Zhao, Xiao-Jun Ye

28-04-2022 | Technical Article

An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys

D. Panda, S. Tripathy, R. K. Sabat, S. Suwas, S. K. Sahoo

28-04-2022 | Technical Article

Hydrophobicity and Wear Resistance of Textured Carbon Fiber/Polytetrafluoroethylene Composite Coatings

Lin-ting Wang, Rui-zhe Wang, Li-na Zhu, Wen Yue, Jia-jie Kang, Zhi-qiang Fu, Ding-shun She, Mei-gui Feng, Cheng-biao Wang

27-05-2022 | Technical Article

The Scatter in Fracture Toughness of Two Different Pearlitic Railway Wheels

Runnong Chen, Zhaodong Li, Xinlong Zhao, Shitong Zhou, Xin Wang, Guangjie Da, Xiaofeng Zhang, Qifu Zhang, Xiaogang Li

25-04-2022 | Technical Article

Long-Term Creep Behavior of a CoCrFeNi Medium-Entropy Alloy

K. A. Rozman, M. Detrois, M. C. Gao, P. D. Jablonski, J. A. Hawk

10-06-2022 | Technical Article

Enhancing the Tribological Performance of PFPE by Using Defect-Rich MoS2 Additives Under High Vacuum

Kaifeng Zhang, Lixia Huo, Junqin Duan, Xiaoying Lu, Xuehu Men, Cailing Xu, Hui Zhou

09-05-2022 | Technical Article

Influence of Microstructure and Passive Film on the Corrosion Behavior of CoCrFeMnNi High-Entropy Alloy Prepared by Different Cooling Methods in a Simulated Alkaline Soil Solution

M. Zhu, B. Z. Zhao, Y. F. Yuan, S. Y. Guo, J. Pan

20-04-2022 | Technical Article

Microstructures, Mechanical Properties and Thixoformability of TiB2/Al Composite Prepared by Ultrasonic-Assisted Squeeze Casting

Yu Jin, Gang Chen, Xin Zhang, Wei Chen, Tiezhu Chen, Jie Ding, Qing Chang, Zhuanye Xie, Zhiming Du

18-04-2022 | Technical Article

Effect of Ca Content on the Microstructure and Mechanical Properties of Hot-Extruded Mg-6Al-2Nd Alloys

Xing Sichong, Feng Yicheng, Zhao Sicong, Wang Lei, Guo Erjun, Wang Liping

17-05-2022 | Technical Article

Microstructural Evolution and Mechanical Properties of Vacuum Brazed TC4 Titanium Alloy Joints with Ti-Zr-Ni Filler Metal

Min Liang, Youqiong Qin, Danfeng Zhang, Feng Zhao

26-04-2022 | Technical Article

Microstructure, Mechanical, and Electrochemical Evaluation of Chrome-Manganese Stainless Steel Activated Tungsten Inert Gas Welded Joint

Ashish W. Fande, Ravindra V. Taiwade, P. Chandra Sekhar

27-04-2022 | Technical Article

A Mechanical and Microstructural Study on Friction Stir Welding of 5083 Aluminum Alloy Based on Optimal Values of the Response Surface Method

Afshin Emamikhah, Afshin Kazerooni, Masoud Rakhshkhorshid

17-05-2022 | Technical Article

Characterization of Welded Joints of Dissimilar Nickel-Based Superalloys by Electron Beam and Rotary Friction Welding

Tom Saju, M Velu

13-06-2022 | Technical Article

β Grain Evolution and Static Recrystallization Mechanism during Hot Rolling and Annealing of Ti-35421 Titanium Alloy

Zhao Ren, Ke Wang, Renlong Xin, Yanhua Guo, Hui Chang, Qing Liu

02-05-2022 | Technical Article

Effect of Post-austempering Cold Work on Thermal Stability of Retained Austenite and Mechanical Properties of Medium Carbon High Silicon Multiphase Steels

A. Varshney

16-05-2022 | Technical Article

Application of a Novel Process Called Vacuum-Encapsulated Slurry Method to Form a Silicide-Aluminide Protective Coating on Ti6Al4V Alloy

Saeed Nouri, Mohammad Ali Mostafaei, Masoud Asayesh

16-05-2022 | Technical Article

Boron and Thermomechanical Processing Effects on the Metallurgical Properties of a Niobium-Titanium High-Strength Low-Alloy Steel

Alisson Paulo de Oliveira, Berenice Mendonça Gonzalez

05-05-2022 | Technical Article

Microwave-Assisted Hybrid Sintering of 316L Powder Compacts: Microstructure, Mechanical, and Electrochemical Properties

Kasagani Veera Venkata Nagaraju, Sinnaeruvadi Kumaran, Tiyya Srinivasa Rao

Springer Professional

Table of Contents (78 Articles)

Evolution during Hot Rolling and Control by Thermomechanical Control Process of Surface Decarburization on 38Si7 Spring Steel

The Effect of Bainite Volume Fraction on Wear Behavior of AISI 4340 Ferrite–Bainite Dual-Phase Steel

Effect of Al Addition on the Rolled Microstructure and Mechanical Properties of Mg-4Y-3Nd Alloys

Microstructure Characteristics and Strengthening Mechanism of Martensitic Steel at Two Quenching Rates

Effect of Equiatomic Ti/Zr Substitution on the Shape Memory Effect of Biomedical Ti-Zr-Mn-Mo Alloys

Back-Face-Signature-Monitored Evaluation of Foam-Sandwich Structures as Shock Mitigating Materials

Insight into the Corrosion Resistance Deterioration and Corrosion Film Transformation of Ti6321 Weldment in a Simulated Deep Sea Environment

Correction to: Insight into the Corrosion Resistance Deterioration and Corrosion Film Transformation of Ti6321 Weldment in a Simulated Deep Sea Environment

On 3D-Printed Acrylonitrile Butadiene Styrene-Based Sensors: Rheological, Mechanical, Morphological, Radio Frequency, and 4D Capabilities

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

Wear, Corrosion, and Biocompatibility of 316L Stainless Steel Modified by Well-Adhered Ta Coatings

Mechanical and Thermal Properties of Cu-25wt.%Fe-25wt.%Nb Composite Sintered by Spark Plasma

Industrial Arc Ion Plating and Unbalanced Magnetron Sputtering Coating Deposition: Static and Fatigue Performances of TiAlN-Coated SKH51 Tool Steel

Microstructure and Properties of Jet Pulse Electrodeposited Ni-TiN Nanocoatings

An Investigation of the Role of Calcium in the Microstructure of Mg-5Al-4Sn-Based Alloys and Pitting Corrosion Resistance

Studies on Microstructure, Mechanical Properties, and Corrosion Behavior, of Partially Open-Cell Magnesium Foam through Powder Metallurgy Route

Effects of Rolling and Aging Treatment on Texture and Anisotropy of Fe-Si-Mn Aluminum Alloy Sheet

Microstructure and Wear Behavior of Self-Lubricating Microwave Clads Deposited on Titanium Alloy

Tensile Property and Failure Behavior of Copper/Aluminum Dissimilar Friction Stir Welding at Elevated Temperatures

Insight into the Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Mg Alloys from the Microstructures in PEO Coatings

Electrochemical Study of Anodized AZ31 Magnesium Alloy (Mg/MgO) Immersed under Watered Cementice Paste

Novel Approach for the Synthesis of Highly Corrosion Resistant and Electrically Conductive Cerium Hexaboride Coating

γ' Phase in a New Fe-Based Superalloy

Effect of Ni Addition on the Microstructure and Mechanical Properties of 6101 Aluminum Alloy with High Electrical Conductivity

The Effect of Extrusion Ratio on the Corrosion Resistance of Ultrafine-Grained Mg-4Li-3Al-Zn Alloy Deformed Using Extrusion with a Forward-Backward Oscillating Die

Effect of Temperature on Sliding Wear Behavior of Ti-6Al-4V Alloy Processed by Powder Bed Fusion Additive Manufacturing Techniques

Flux-Cored Wire for Arc Additive Manufacturing of Alloy Steel: Effect of Inclusion Particles on Microstructure and Properties

Influence of Pin Profile on Mechanical, Microstructure and Texture Characteristics of Friction Stir Welded Elektron 21 Alloy

Role of BaZrO3 Phase on Microstructure and Ionic Conductivity of 8YSZ

The Formability, Microstructure, and Mechanical Properties of Powder-Sintered TC4 Alloy Hollow Shafts Formed by Cross-Wedge Rolling

Surface Integrity and Core Loss in Lamination Coated Thin Sheets of M-43 Grade Cold Rolled Non-grain-Oriented Electrical Steel

A Comparative Study on the Degradation Properties of Mg Wire/Poly(lactic acid) Composite Rods: Influence of Rod Diameter

Influence of Titanium on the Microstructure and Mechanical Properties of Foundry Zinc Alloy

Ta Effect on Structural, Mechanical and Tribological Properties of TiCN Coatings

Development of Microstructural Heterogeneity in 304 LN Austenitic Stainless Steel: Effect of Temperature and Strain

Dilatometric and Microstructural Investigations on Austenite Decomposition under Continuous Cooling Conditions in a Cu-Bearing High-Strength Low-Alloy Steel

Residual Stress Distribution and Dynamic Stress Variation in Aluminum Alloy Round Rods after Laser Shock Peening

Influence of Reinforcement Particles on Dynamically Recrystallized Grain of Hot Upset Sintered Al-B4C Composites

Coupling Between Ductile Damage Evolution and Phase Transition in Single Crystal Niobium Subjected to High Strain Rate Loading

Investigation on Mechanical Properties and Energy Absorption Capabilities of AlSi10Mg Triply Periodic Minimal Surface Sheet Structures Fabricated via Selective Laser Melting

Powder Metallurgy versus Casting: Damping Behavior of Pure Aluminum

Study of E690 Steel Corrosion in Seawater Containing Methanogenic Archaea

Study for Characterizing Grinding Burn of 1045 Steel Based on Nonlinear Ultrasonic Coefficients

Corrosion Effect on the Efficiency of High-Frequency Mechanical Impact Treatment in Enhancing Fatigue Strength of Welded Steel Structures

Early Fatigue Crack Damage Identification by Multi-classification Support-Vector Machine Based on Lamb Wave and Temperature Compensation

Dynamic Behavior of Cu/Al-Laminated Metal with Impedance Mismatch

An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys

Hydrophobicity and Wear Resistance of Textured Carbon Fiber/Polytetrafluoroethylene Composite Coatings

The Scatter in Fracture Toughness of Two Different Pearlitic Railway Wheels

Long-Term Creep Behavior of a CoCrFeNi Medium-Entropy Alloy

Enhancing the Tribological Performance of PFPE by Using Defect-Rich MoS2 Additives Under High Vacuum

Influence of Microstructure and Passive Film on the Corrosion Behavior of CoCrFeMnNi High-Entropy Alloy Prepared by Different Cooling Methods in a Simulated Alkaline Soil Solution

Investigation of Microstructure and Wear Behavior of Ni60CuMo Coating Fabricated on ZL109 Aluminum Alloy by Plasma Spray

Effects of Multiple Impacts on the Microstructure and Dynamic Mechanical Properties of SAC0307 Alloy

Effect of Angle between Pulse Current and Load Direction on Flow Stress of Ti-6Al-4V Alloy under Uniaxial Tension

Effects of Magnetic Field on the Corrosion Reactions of A572 Steel in NaCl Aqueous Solution

Rapid Strengthening of Interstitial Free Steel Using Amorphous FeC Thin Films and Induction Heating

Microstructures, Mechanical Properties and Thixoformability of TiB2/Al Composite Prepared by Ultrasonic-Assisted Squeeze Casting

Effect of Ca Content on the Microstructure and Mechanical Properties of Hot-Extruded Mg-6Al-2Nd Alloys

Microstructural Evolution and Mechanical Properties of Vacuum Brazed TC4 Titanium Alloy Joints with Ti-Zr-Ni Filler Metal

On Development of Alternating Layer Acrylonitrile Butadiene Styrene-Al Composite Structures Using Additive Manufacturing

High Tensile Properties and Low Surface Roughness of Gr/Cu Foils

Processing Quality Inspection of Additive-Manufactured Microspiral Inductors Based on Micro-Computed Tomography Data

Microstructure and Mechanical Properties of ER70S-6 Alloy Cladding on Aluminum Using a Cold Metal Transfer Process

Single-Pass Full Penetration Laser Welding of 10-mm-Thick EH40 Using External Magnetic Field

Research on Selective Laser Sintering Process of Limestone/Polyethersulfone Composites

A Cu-Al2O3 Composite with Ultrahigh Tensile Strength Prepared by High-Pressure Torsion

Microstructure, Mechanical, and Electrochemical Evaluation of Chrome-Manganese Stainless Steel Activated Tungsten Inert Gas Welded Joint

A Mechanical and Microstructural Study on Friction Stir Welding of 5083 Aluminum Alloy Based on Optimal Values of the Response Surface Method

Characterization of Welded Joints of Dissimilar Nickel-Based Superalloys by Electron Beam and Rotary Friction Welding

β Grain Evolution and Static Recrystallization Mechanism during Hot Rolling and Annealing of Ti-35421 Titanium Alloy

Effect of Post-austempering Cold Work on Thermal Stability of Retained Austenite and Mechanical Properties of Medium Carbon High Silicon Multiphase Steels

Application of a Novel Process Called Vacuum-Encapsulated Slurry Method to Form a Silicide-Aluminide Protective Coating on Ti6Al4V Alloy

Experimental Research on Preparation and Grinding Surface Quality of Coated Micro-Grinding Tools

Development of Oxide Dispersed Austenitic Stainless Steel through Mechanical Alloying and Spark Plasma Sintering

Effect of CeO2 on Microstructure and Wear Property of Laser Cladding Ni-Based Coatings Fabricated on 35CrMoV Steel

Boron and Thermomechanical Processing Effects on the Metallurgical Properties of a Niobium-Titanium High-Strength Low-Alloy Steel

Microwave-Assisted Hybrid Sintering of 316L Powder Compacts: Microstructure, Mechanical, and Electrochemical Properties