Issue 17/2025
Content (118 Articles)
The Chemical Compatibility Between an Innovative Superhydrophobic and Oleophobic Ultrafine Dry Powder Extinguishing Agent and Representative Aerospace Aluminum Alloy
- Original Research Article
Yurong Liu, Ruiyu Chen, Zhixuan Wang, Rui Zhang, Hongling Jing, Daheng Yu, Renming Pan
Effect of WC Particle Addition on the Wear Resistance of FeCoNiAlTi Coatings
- Original Research Article
Yilong Zhang, Dongli Lv, Li Tian, Kexu Chen
Twinning and Precipitation Processes in Hardened and Tempered 54SiCr6 Spring Steel
- Original Research Article
Aleksandr Gokhman, Zbyšek Nový, Jakub Čížek, Pavel Salvetr, Milan Svoboda, Jakub Kotous, Petr Motyčka
Effect of Isothermal Treatment and Rolling on the Microstructure and Properties of Low Carbon Manganese Steel
- Original Research Article
Rendong Liu, Xiaonan Wang, Xin Xu, Chenshuo Cui, Dong Lv, Qian Sun, Zheng Cao, Lijia He, Fei Teng, Wenlu Fan, Zhu Chen, Rong Wang, Jianxia Lin, Tinting Wang, Minfu Xia
Effect of Laser-Induced N2 Gas and Ti6Al4V/Cr3C2 Powders Coupling on Properties of Composite Coatings with Ceramic Reinforcement Phases by In Situ Synthesis on Ti6Al4V
- Original Research Article
Hui-Min Wen, Ming Pang, Yan-Jiao Hu
Physical and Gamma-Ray Shielding Characteristics of Borophosphate Glasses Reinforced with Sb2O3: Simulation and Theoretical Approach
- Original Research Article
Nada Alfryyan, Norah A. M. Alsaif, Hanan Al-Ghamdi, A. M. Abdelghany, Y. S. Rammah, A. S. Abouhaswa, S. Talaat, S. M. Kotb
Effect of Interlayer Cooling on Microstructure and Microhardness of FeCoNiCrAl High-Entropy Alloy Fabricated by Laser Additive Manufacturing
- Original Research Article
Zengrong Hu, Mingrui Chen, Zhikang Wu, Shuncun Luo, Xiaonan Wang, Jiale Xu, Hai Zhang
Study on the Effect of Ultrasonic Impact Treatment on the Impact Toughness of S355J2 Steel Welded Joints
- Original Research Article
Bangping Gu, Yuchen Yang, Jingshu Zhuo, Jintao Lai, Guanhua Xu, Liqiang Gao, Cong Yue
In-Situ Electron Backscatter Diffraction Investigation on {332}<113> Twinning Deformation Behaviors in β-Type Ti-15Mo Alloy
- Original Research Article
Jincai Dai, Fengyun Yu, Xiaohua Min, Cheng Ren
Oxidation Behavior of Incoloy 825 at 950 °C under Static Air Atmosphere
- Original Research Article
Shuang Liu, Chongyang Li, Yiyou Tu, Guoqiang Xi
Characterization of the Adhesive Layer through Finite Element Modeling in Double Strap Joints and Validation Through Digital Image Correlation
- Original Research Article
T. S. Sahana, Vadivuchezhian Kaliveeran, R. M. Raveesh, Subrahmanya Kundapura
Comparison of Tin and Indium Thin Film’s Structural, Morphological, Adhesion, and Electrical Properties for Ohmic Contact in HgCdTe-Based Infrared Detectors
- Original Research Article
Shailendra Kumar Gaur, Qasim Murtaza, R. S. Mishra
Effect of High Strain Rate and Temperature on the Mechanical Response of Graphene-Reinforced Aluminum Foam
- Original Research Article
Rupesh Devapati, Akhouri A. Sinha, D. P. Mondal, Sanjeev K. Khanna
Study on Electromagnetic Wave Absorption and Mechanical Behavior of C/Al2O3 Composites
- Original Research Article
Xiaomin Luo, Jing Lin, Renpeng Wang, Wei Xu
Study on Anisotropy of Microstructure and Texture of Ti-10V-2Fe-3Al Under Detonation Load
- Original Research Article
Rongjun Zhang, Tong Liu, Jinghan Yang, Jin Zhang, Yong Lian
Mathematical Modeling of the Deformation Zone Under an Impression Creep Indenter Using Upper-Bound Theory
- Original Research Article
A. Rezvani, R. Ebrahimi
Microstructure, Corrosion, and Hardness Properties of Ni Coatings Electrodeposited from a Deep Eutectic Solvent-Based Electrolyte
- Original Research Article
Mehry Fattah, Sylvie Morin
Microstructure and High-Temperature Fracture Mechanism of Continuously Cast and Directly Rolled 2017 Al-Cu Alloy
- Original Research Article
Cheng-Hua Yang, Bo-Chin Huang, Jun-Ren Zhao, Fei-Yi Hung
Effect of Re-sintering Temperature and Carbon Nanotube Content on Mechanical Behavior Al-CNTs Nanocomposites
- Original Research Article
Akbar Yarahmadi, Hamidreza Mohammadian Semnani, Hassan Abdoos
Toward Antibacterial Anodized Surfaces in Ti6Al4V Alloy Using Silver Nanoparticles and Pectin Coating for Biomedical Applications
- Original Research Article
Sepideh Baratipour, Abbas Bahrami, Abdoulmajid Eslami, Farzaneh Alihosseini
Assessment of Corrosion and Macrostructural Behavior of Ti6321/SS 310 Butt Joints: In Situ Study of Similar and Dissimilar Joints via Friction Stir Welding Technique
- Original Research Article
K. Sai Sujith, S. Ravi
Preparation of Rare Earth Modified Cobalt Powders by Ball Milling and Its Effects on Microstructure and Properties of WC-Co Cemented Carbide
- Original Research Article
Bin Li, Yutao Li, Yong Guo, Hao Chen, Xiangfei Guo, Hongyu Ren, Neng Huang, Shengda Guo
Freckle Formation Tendency of a Single-Crystal Nickel-based Superalloy with Minor Carbon Additions
- Original Research Article
Weiguo Jiang, Lin Dong, Kaiwen Li
Investigating the Effect of Hydroxyapatite Nanoparticle Addition on Mechanical Behavior and Fatigue Life of Polymethylmethacrylate/Hydroxyapatite Restorative Nanocomposite Material
- Original Research Article
Mohammad Beygzade, Majid Safarabadi, Nabi Mehri Khansari, Morteza Ataei-Aazam
Double-Sided Oscillating Laser Welding on Thick AZ31B Magnesium Alloy Plates
- Original Research Article
Xiaobing Pang, Hailong Wang, Mingjun Zhang, Chenxi Li, Heqing Li, Yingzhe Zhang, Mingyue Zhang, Zhuming Bi
Influence of Nb Microalloying on the Microstructure and Toughness of 1000 MPa-Grade Deposited Weld Metals
- Original Research Article
Linlin Zhao, Tongbang An, Yue Zuo, Zhilong Cao, Chengyong Ma, Ju Kang
Research on the Friction and Wear Mechanism of Si3N4 Bearing Materials Under Low Temperature Conditions
- Original Research Article
Chao Wei, Songhua Li, Yonghua Wang
Effect of Infill Density Percentage and Printing Direction on Bending Fatigue Properties of Polylactide Specimens Manufactured by Fused Filament Fabrication
- Original Research Article
Lamis Allegue, Ezzeddine Ftoutou, Haykel Marouani, Tarek Hassine, Yasser Fouad, Hatem Mrad
Microstructure Evolution and Mechanical Properties of TiC/Ti6Al4V Composite Fabricated via by Selective Laser Melting
- Original Research Article
Yangling Ou, Zhanlin Ma, Shun Guo, Qi Zhou, Kehong Wang
A Study on Compression Behavior and Fracture Morphology in Dumbbell-Shaped Ti6Al4V Lattice Structures Fabricated through Additive Manufacturing
- Original Research Article
P. Parameswaran, Saurabh Gairola, D. Kesavan, R. Jayaganthan
A Nonlinear Ultrasonic Wave Mixing Method for Micro-damage Detection of 316L Austenitic Stainless Steel
- Original Research Article
Wenfei Chen, Zuming Zhao, Wei Song, Hu Chen, Shiyi Bao, Lijia Luo
Selection of Bio-implant Materials Based on Metal Additive Manufacturing using Integrated SWARA and WASPAS MCDM Technique
- Original Research Article
Amit Kumar, Sonu Rajak
Enhanced Tensile and Flexural Properties in Carbon Nanotubes and Modified Carbon Nanotubes Added Carbon Fiber-Reinforced Epoxy Resin Thermoset Composites
- Original Research Article
O. Demircan, M. H. I. Ibrahim
Microstructural Stability and Mechanical Properties of a Novel Weldable Ni-based Superalloy during Thermal Exposure at 800 °C
- Original Research Article
Lei Gao, Chaoqian Song, Hao Zhu, Boyuan Zheng, Xuli Liu, Yidong Wu, Xidong Hui
Study of Energy Release and Specific Impulse of Al/MLG/CuO/ Nanothermite for Small-Scale Propulsion Applications
- Original Research Article
Manisha Sharma, Vimal Sharma
Enhancement of Mechanical and Corrosion Behavior in ZK60 Magnesium Alloy via Ni-20%Cr and Cr3C2-25% (Ni-20%Cr) Coatings Applied through Detonation-Gun Thermal Spray
- Original Research Article
K. Sankar, G. Padmanaban
Effect of Pore Size on the Precipitation of Iron-Rich Phase and Impact Toughness in Copper-Infiltrated Steel
- Original Research Article
Pengcheng Lin, Linshan Wang, Xuebing Liang, Qiang Hu, Limin Wang, Xuanhui Qu
Combined Effect of TiO2 and Metallurgical Slag Addition on the Properties of Magnesium Composites
- Original Research Article
Andrea Sánchez-Arroyo, Mario Rodríguez-Reyes, Brandon Osvaldo Villarreal-Fuentes, Dagoberto Vázquez-Obregón, Zully Matamoros-Veloza, José Refugio Parga-Torres, Gerardo Daniel Olvera-Romero, Rogelio Deaquino-Lara, Luis Alfonso García-Cerda, Héctor Mancha-Molinar
Thermomagnetic Treatment for Residual Stress Reduction
- Original Research Article
Gang Huang, Chao Zhou
Carbon Loss and Control for WC Synthesis through a Self-propagating High-Temperature WO3-Mg-C System
- Open Access
- Original Research Article
YongKwan Lee, Shin-Young Choi, Mi-Hye Lee, Soong Ju Oh, Jae-Hong Shin, Jae-Jin Sim, KyoungTae Park
Simulation and Experimental Analysis of Surface Defect Formation of SiCp/Al Composites during Ultrasonic Vibration-Assisted Cutting
- Original Research Article
Qingling Wu, Yongsheng Du, Yakun Yang, Shuaijie Zhai, Chao Wang
Strain Rate Effect on Edge Formability of Complex-Phased Advanced High-Strength Steels in the Hole Expansion Test
- Open Access
- Original Research Article
Hwigeon Kim, Jong Youn Park, Hyounyoung Lee, Myoung-Gyu Lee
Failure Characteristics of Extra-Formable Steel Sheet Exhibiting Inhomogeneous Deformation Bands
- Original Research Article
Vivek K. Barnwal, Rakesh Lingam, Jisik Choi, Jin-Hwan Kim, Frédéric Barlat
Analysis on Mechanical Behavior of Additively Manufactured PLA/Eggshell Composites Using Machine Learning Algorithms
- Original Research Article
Nisha Soms, K. Ravi Kumar, N. Gunasekar
Assessment of Hydrogen Trapped by Microalloyed Precipitates in Steel Using Electrochemical Permeation Tests
- Original Research Article
Santigopal Samanta, K. Mondal, Monojit Dutta, Shiv Brat Singh
In-Plane-Compression Mechanical Behavior of Selective Laser Melting Titanium Alloys’ Self-Similar Honeycomb
- Original Research Article
Yanchun Chen, Xu Huang, Jibin Jiang, Guofu Lian, Changrong Chen
Micro-surface Texturing of Ti6Al4V Alloy for Improved Hydrophobicity: Integrating Experimental and Mathematical Approaches
- Original Research Article
Rishanbor Syiemlieh, Priyam Kashyap, Santosh Kumar Tamang, Successful Khlem, Geethapriyan Thangamani, R. Jose Immanuel
Influence of GNP and MWCNTs Fillers in Hybrid Polymer Nanocomposite on the Microwave Absorption Performance of Multilayered Structures
- Original Research Article
Sadhu Prasanth, Niranjan Kumar Injeti, VNaga Bhushana Rao, B. V. S. R. N. Santhosi
Machine Learning-Based Improved Creep Life Prediction of 316 Austenitic Stainless Steel with Add-on Chemical and Microstructural Features
- Open Access
- Original Research Article
Harsh Kumar Bhardwaj, Mukul Shukla
Environment-Friendly and Low Toxicity Polishing Solution Preparation and Performance Testing for Medical Titanium Alloy Materials
- Original Research Article
Xiaokun Wei, Zhankui Wang, Peiyan Zhang, Minghua Pang, Kuncheng Liu, Jianxiu Su
Effect of Stress Concentration on the Tensile Deformation of AZ31 Magnesium Sheets with Perforated Cylindrical Voids of Various Shapes and Sizes
- Original Research Article
Choongdo Lee
Achieving Synchronous Improvement in Mechanical Properties and Softening Resistance of Cu-Cr Alloys by Introducing Ta
- Original Research Article
Ningyu Li, Shizhi Yu, Mingyang Li, Wenhao Yu, Renyi Jian, Yachao Yu, Xinyu Wang, Yongqin Chang
Effects of Laser Energy Density on Microstructure and Properties of FeCoCrNiMo High-Entropy Alloy Coatings on 45 Steel Substrate
- Original Research Article
Liwei Du, Xuedao Shu, Haijie Xu, Siyuan Chen, Yimin Deng
Influence of Preoxidation Treatment on the High-Temperature Oxidation Behavior of an Al-Si Coating on a DZ125 Alloy
- Original Research Article
Rong Chen, Ruixiong Zhai, Kaiyue Lü, Peng Song, Taihong Huang, Jianguo Lü, Biju Zheng, Guangliang Liu, Jiansheng Lu
Microstructure and Mechanical Properties of High Strength–Ductility Cu-Zn-Al-Fe β-Brass Alloys
- Original Research Article
Jiahe Mei, Zhe Zhuang, Xiaoqiang Chen, Yaofeng Chen, Lipeng Guo, Cuiping Wang, Shuiyuan Yang
Study of Ballistic Impact Performance of the Bioinspired Flexible Multilayered Filling Armor by Different Projectiles
- Original Research Article
Chunan Du, Gang Yang, De’an Hu, Changran Li
Study on Dynamic Strain Aging Behavior of 92W-5Co-3Ni Alloy at Different Strain Rates and Temperatures
- Original Research Article
Suswanth Poluru, Nitin Kotkunde, Swadesh Kumar Singh, Ashutosh Panchal, Prabhu Gnanasambandam
Structural Design and Mechanical Properties Analysis of Gradient Primitive Porous Dental Implant Based on Selective Laser Melting
- Original Research Article
Wanfeng Zheng, Shoujin Zeng, Jing Wang, GuangYu Bai, JianHua Ye
Formability Assessment of 3D-Printed Acrylonitrile Butadiene Styrene Sheets Using Nakajima Test
- Original Research Article
Abdolvahed Kami, Hamed Fakhri, Mehdi Hosseini, Hamid Mirtorabi
Ti-VMoCrFeZrAl β-Type Titanium Alloy with High Strength Obtained by Composition Design and Cold Rolling with Heat Treatment
- Original Research Article
Jisheng Zhang, Enda Gao, Zhengbo Wang, Siqi Pan
Effect of Normal Load and Temperature on the Tribo-Corrosion Behaviors of 20CrMnTi Alloy Steel
- Original Research Article
Xiaolong Wu, Gao Pengju, Yaosen Du, Xiaoren Tang, Xiaosai Wang
Experimental Investigation of Bead Geometry and Tribological Analysis of IN718 Precipitation-Hardened Alloy Synthesized by Wire Arc Additive Manufacturing
- Original Research Article
R. P. Elvin, M. Arockia Jaswin, N. S. Balaji, S. M. Sivagami
Hydrogen Permeation Behavior of X80 Steel under Constant and Slow Strain Rate Tension Stress
- Original Research Article
Yunying Xing, Zhile Yang, Qian Zhao, Lei Zhang
The Effect of cBN Powder with Matched Particle Size on the Properties of PcBN Composites with Ti3AlC2 System
- Original Research Article
Changjiang Xiao, Haoyu Zheng, Lihui Tang, Jinming Ma, Qingyan Dong
The Influence and Mechanism of Polyethylene Fiber Characteristics on the Mechanical Properties of High-Strength Engineered Cementitious Composites
- Original Research Article
Shuangquan Qing, Chuanxi Li
Exploring ZnO-Based pn Homojunction for Gas Sensing Applications: Fabrication and Performance Evaluation
- Original Research Article
V. S. Siril, K. K. Jasmi, T. Anto Johny, Deepu Omanakuttan, K. N. Madhusoodanan
Orientation Dependence of the Yield Strength of the B2 Phase in Stress-Free and Stress-Assisted Aged Ti-51.5at.%Ni Single Crystals
- Original Research Article
E. E. Timofeeva, E. Yu. Panchenko, M. V. Zherdeva, Yu. I. Chumlyakov
Influence of Initial Orientation and MAO Coating on SCC Susceptibility of Magnesium Alloy in Simulated Body Fluid with Acid Environments
- Original Research Article
Ying Xiong, Qiujing Gu, Aoxuan Zhang
Strong Strain Hardening in a Cost-Effective Fe60Cr15Ni16Al9 Medium-Entropy Alloy via Carbon Alloying
- Original Research Article
Xinghua Zhang, Shilin Feng, Yongfu Cai, Zhimin Yang, Hongyan Wang, Jianwei Tang, Ran Wei
Investigation of Processing Effects on the Surface Condition of Chemical Vapor Deposition Single-Crystal Diamond by Sequential Indentation Tests
- Original Research Article
Yongkang Xin, Chen Li, Jing Lu, Feng Jiang, Shuai Xu, Ningchang Wang, Ning Yan
Application of Machine Learning-Based Approach to Predict and Optimize Mechanical Properties of Additively Manufactured Polyether Ether Ketone Biopolymer Using Fused Deposition Modeling
- Original Research Article
Jyotisman Borah, M Chandrasekaran
Investigation of Plastic Ball Bearing Production by Additive Manufacturing
- Original Research Article
Görkem Ağören, Burcu Küçükoğlu Doğan, Tuncay Karaçay
Parametric Study and Weldability Characteristics of Dissimilar Metals Cobalt Superalloy L605 and SS321 Using Fiber Laser
- Original Research Article
B. Hari Prasad, Mukul Anand, Shakti Kumar, A. K. Das, P. Mastaniah, G. M. Reddy
Effect of Zn Content on the Mechanical Properties, Damping Capacity, and Intergranular Corrosion of Al-Mg-Zn-Sc Alloys
- Original Research Article
H. Y. Xie, C. Y. Liu, B. Zhang, J. C. Xie, Z. L. Li
Study on the Thermal Deformation Behavior and Hot Processing Map of FeCoNiCuB0.1Si0.16 High-Entropy Alloy
- Original Research Article
En Rui Liu, Ming Long Gong, Mao Lin Liu, Fang Xuan Bao, Feng Fang Liu, Jing Bai, Qiu Zhi Gao, Song Li
Effect of Composite Plastic Deformation Technologies on the Microstructure Evolution and Properties of Cu-0.3wt.%Al2O3 Dispersion-Strengthened Copper Alloy
- Original Research Article
Yang Yu, Yongpeng Liu, Yan Teng, Shangchen Feng, Xinyu Wang, Gang Chen, Jianlei Yang, Wencong Zhang
Investigation on Glass Material’s Hole Characteristics Using Different Tool Geometries in Cognitive Electrochemical Discharge Machining Process
- Original Research Article
Viveksheel Rajput, Mudimallana Goud, Narendra Mohan Suri, Sahil Grover, Sarbjit Singh, Sanjeev Kumar
Effect of Gd and Y Addition on Hot Compression Behavior and Workability of Mg-10Li-3Al-0.5Zn Alloy
- Original Research Article
Gang Zeng, Lianmei Wu, Xinkai Kang, Wenxia Hu, Meng Fang, Hongchao Xiao, Fei Li, Zihang Guo
Microstructure and Mechanical Properties of Dissimilar Friction Stir Welding of High-Strength Martensitic Steel with Q235 Steel Plates
- Original Research Article
Shuai Li, Maolin Guo, Shuhao Zhu, Yufeng Sun, Lihong Wu, Shaokang Guan
Mechanical Properties and Post-forming Microstructure/Properties of 6082 Aluminum Alloy Subjected to Pre-hardening Forming Process
- Original Research Article
Yawei Mao, Zhili Hu, Lin Hua, Haitao Zhao, Yang Yan
Processing and Characterization of Hybrid Multi-material Joints
- Original Research Article
Liping Zhou, Baojian Han, Liying Wang
Effect of Mn on Microstructure and High-temperature Properties of Mg-Y-Al Alloy
- Original Research Article
Yang Cao, Lei Wang, Erjun Guo, Yicheng Feng, Sicong Zhao, Yuanke Fu
Novel Approach for Processing and Fabricating PLA/MgTiO3 Composite Filaments in Biomedical 3D Printing with Enhanced Mechanical and Thermal Properties
- Original Research Article
P. Vicky Kumar, Anil Kumar Birru, Nelson Muthu
Effect of Nano-B4C Particulates on the Mechanical Properties and Corrosion Behavior of Magnesium (AZ91D) Matrix-Based Nanocomposites Fabricated through Ultrasonication-Assisted Stir Casting Method
- Original Research Article
Anirban Mitra, Suman Kumar Mandal, Vidyut Dey, Ram Naresh Rai
Comparative Analyses of Microstructure and Assessment of Wrought Mg AZ31 in Casting Forms
- Original Research Article
Ali Dhaif, Wutian Shen, Anita Hu, Peilin Ying, Jun Wang, Sang Bum Yi, Henry Hu
Study of Rotating-Bending Fatigue Properties and Strengthening Mechanism of Laser Shock Peening on Ti17 Welded Joints
- Original Research Article
Jiaxuan Chi, Dongsheng He, Yongxin Zhang, Hepeng Zhang, Shen Qu, Gongxuan Zhang, Yanqiang Xu, Guofeng Han, Hongqiang Zhang, Wei Guo
Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material
- Original Research Article
Sudipta Pramanik, Dennis Milaege, Anatolii Andreiev, Kay-Peter Hoyer, Mirko Schaper
Correction: Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material
- Correction
Sudipta Pramanik, Dennis Milaege, Anatolii Andreiev, Kay-Peter Hoyer, Mirko Schaper
Optimizing Graphene Nanoplatelet Coating for Enhanced Wear Resistance on Copper Through Electrophoretic Deposition Parameters
- Original Research Article
Gabriele Baiocco, Daniel Salvi, Nadia Ucciardello
The Joint Formation Mechanism, Microstructure, and Mechanical Performance of Resistance Rivet-Welded Mg/Steel Joints
- Original Research Article
Zelong Wang, Sizhe Niu, Ming Lou, Zixuan Chen, Yunwu Ma, Shanqing Hu, Xiaoying Fang, Yongbing Li
Development of Novel Tooth Colored Micro-Ceramic Injection Molded Alumina Orthodontic Brackets
- Original Research Article
Prosenjit Das, Astik Kumar, Adrika Maji
Experimental Investigation of Static Softening Behavior of a Cr-Co-Ni-Mo Ultra-high Strength Stainless Steel in Double-Pass Compression
- Original Research Article
Hao-chen Ding, Yi Ding, Ying-hu Wang, Ji-bin Pei, Zhen-dong Sheng, Chi Zhang, Li-wen Zhang, Huai-bei Zheng, Shi-jun Wang
Effect of Temperature, Current Density, and Deposition Time on Superhydrophobic and Superoleophobic Properties of Ni Coating Designed by Laser-Electrodeposition Process
- Original Research Article
Jian Gao, Jiabei Zhang, Yuyang He, Yucheng Wu
The Influence of Step Deviation and Squeeze Force on the Mechanical Properties of Aluminum Alloy Riveted Joints
- Original Research Article
Ming Li, Wei Tian, YanYan Lin
Surface Stress Regulation and Cutting Performance of the TiN/TiAlN-Coated Tool in Clean LN2 Cutting Process
- Original Research Article
Zuomin Sun, Guangming Zheng, Kun Tan, Shiwu Li, Xiang Cheng, Jun Gao
Influence of Temperature and Strain Rate on Formability of Ti6Al4V in Warm Incremental Forming
- Original Research Article
Ankit Kumar Gupta, Mithilesh Kumar Tiwari, Harshal Y. Shahare, Puneet Tandon
Effect of Zr Content on Microstructure, Texture and Mechanical Properties of Friction Stir-Welded Aluminum Alloy Joints
- Original Research Article
Wangzhen Li, Zhang Luo, Youping Sun, Bing Li, Yuqi Li
Optimizing Heat Input in Continuous and Pulse Current Mode to Control Defect Formation and Weld Properties in Cupronickel Alloy
- Original Research Article
Swagat Dwibedi, Swarup Bag
Microstructure and Mechanical Properties of Mg-5Li-3Al-1Zn Alloys with Y Addition Fabricated by Hot Extrusion
- Original Research Article
Tong Li, Ruihong Li, Yubao Liu, Wenxin Hu, Ruizhi Wu, Lilin Yang, Haiyan Wang, Zili Jin, Huiping Ren
Impact of Sandblasting and Laser Texturing on Microstructure and Elevated Temperature Tribological Behavior of Cold-Sprayed μB4C and Graphene Nanoplatelet-Reinforced AA7075
- Original Research Article
Achyuth Kulkarni, Troy Y. Ansell
Friction Stir Channeling Tool Design for Better Material Flow and Channel Strength
- Original Research Article
Sooraj Patel, Rahul Kumar, Sushil Mishra, Amit Arora
Stress Corrosion Behavior of AISI 4340 in High-Speed Hard Milling Using MQL
- Original Research Article
Amir Rasti, Hamed Hassanpour, Sina Sabbaghi Farshi, Javad Hashemi Khosrowshahi
Microstructure, Wear Resistance, and Antibacterial Properties of Ni-Based Coatings with Copper/Nickel-Coated Copper Addition
- Original Research Article
Yan-Jiao Hu, Xi Chen, Guo-Ye Jiang
An Experimental Investigation on micro-Friction Stir Welding (μFSW) Process Using Pinless Tool
- Original Research Article
Meghnath Sen, Asit Baran Puri
SiC-Induced Microstructural Characteristics in Friction Stir Processed Al Matrix Composites and Their Effects on the Strength and Wear Resistance
- Original Research Article
Shuai Zhang, Tao Wang, Ying Nie
Melt Flow Analysis of Stainless Steel-Polylactic Acid Composite in Fused Metal Deposition Modeling
- Original Research Article
Rahul Jain, Saurabh Pandey, Neha Gupta
Effects of Post-processing Heat Treatment on Tensile Properties and Strain Hardening Ability of Inconel718 Alloy Components Fabricated by Laser-Directed Energy Deposition
- Original Research Article
Siwei Xin, Defu Liu, Guan Liu, Zixin Deng, Chunye Li, Shudan Li, Tao Chen
Effect of Pack Composition on the Characteristic and Wear Behaviors of Fe-Al Intermetallics Grown on AISI 304 Stainless Steel
- Original Research Article
Serkan Dal, Yasemin Altınay, Gülşah Aktaş Çelik, Ozkan Gokcekaya, Şaban Hakan Atapek, Ali Günen
Thermal Behavior in Wire Arc Additive Manufacturing: A Comparative Study of the Conventional Process and Infrared Heater Use
- Original Research Article
Ebubekir Dogan, Oguzhan Yilmaz, Mehmet Mollamahmutoglu
Investigating Cryogenic and Heat Treatment Effects on Hardness and Wear of Uncoated Carbide Inserts: A Microstructure and AI Approach
- Original Research Article
Amarin Chanpariyavatevong, Chamroeun Se, Anantaya Timtong, Wanwanut Boongsood, Attasit Wiangkham
Effect of Cryogenic Treatment on 7A09 Aluminum Alloy and Optimization of Process Parameters
- Original Research Article
Yuhang Liu, Zhi Chen, Yao Huang, Linwang Jing, Xuemei Niu
Experimental Evaluation of the Use of Yttria Ceramic Particles to Enhance the Thermal, Corrosion, and Electrical Properties of Sintered AA7075/Graphene Nanocomposites
- Original Research Article
Prashanthkumar Hadi, Vinyas Mahesh, Vishwas Mahesh, Dineshkumar Harursampath
Inconel 625 Coating Produced by Directed Energy Deposition–Laser Beam (DED-LB) for Corrosion-Resistant Applications
- Original Research Article
F. E. Mariani, C. Y. N. Konno, C. B. Cruz, A. N. Lombardi, A. Garcia, N. Cheung, R. T. Coelho, L. C. Casteletti
Study on the Effect of Varying Cooling Conditions on Microstructural and Mechanical Performance of the GTAW Joint of Heat-Resistant P92 Steel
- Original Research Article
Amit Kumar, Kalpna Gupta, Preeti Tiwari, Chandra Shakher Tyagi, Sachin Sirohi, Chandan Pandey
Influence of Partitioning Temperature on Microstructure and Hardness of Quenching and Partitioning Nitrogen-Alloyed Martensitic Stainless Steel
- Original Research Article
Ahmad Nazari, Behrooz Ghasemi
Experimental Analysis of Thermomechanical Properties of Innovative Heat Treated Metal Matrix Composites Processed by Additive Manufacturing for Space Rocket Applications
- Open Access
- Original Research Article
Delio Lusicini, Matteo Crachi, Raffaella Sesana, Cristiana Delprete, Nicola Sicignano
