Issue 19/2024
Content (56 Articles)
- Review
A Review on Manufacturing Pure Refractory Metals by Selective Laser Melting
Biyao Liu, Peilei Zhang, Hua Yan, Qinghua Lu, Haichuan Shi, Zhenyu Liu, Di Wu, Tianzhu Sun, Ruifeng Li, Qingzhao Wang
- Original Research Article
Numerical Simulation of In Situ Reaction Synthesis of TiC Reinforced Aluminum Matrix Composite from Elemental Al-Ti-C Powders
V. V. Kaverinsky, G. A. Bagliuk, Z. P. Sukhenko
- Original Research Article
On the Hu 2003 Plasticity Criterion
Walid Najjar, Imed Ghaouss, Idriss Tiba, Philippe Dal Santo
- Original Research Article
Investigation of Adhesion Force of Silver and Gold-Coated Surfaces with Different Thicknesses on Silicon Substrate
B. Molaei, M. Kolahdoozan
- Original Research Article
Interfacial Bonding Strength and Wear Resistance of TaC-Reinforced Layer Prepared on Bearing Steel Surface by Hot Pressing
Nana Zhao, Teli Yao, Hanqi Yan, Congcong Ren, Lehao Wang, Heguang Liu, Shujuan Li, Yunhua Xu
- Original Research Article
Synthesis of Carbon Membranes Using Sorbitol as a Carbon Source for Desalination Applications
Adi Darmawan, Saral Dwi Miftiyati, Choiril Azmiyawati
- Original Research Article
Improvement of Surface Quality of AISI 1010 Steel Plates by Ball Burnishing
F. Gharbi, K. J. Al-Fadhalah, M. Tharwan
- Original Research Article
Optimization of Hard Anodizing Process Parameters on 6061-T6 Aluminum Alloy Using Response Surface Methodology
Reyhane Nabavi, Shayan Sarraf, Mansour Soltanieh
- Original Research Article
High-Cycle Fatigue Properties and Life Prediction of ZK30 Magnesium Alloy at Room and Elevated Temperatures
Zikuan Xu, Lixin Huang, Rui Liu, Hongyi Zhan, Peng Zhang, Chen Dong, Meng Li, Jingru Shen, Zhefeng Zhang
- Original Research Article
Effect of Hf-Doped MCrAlY Alloy on the Structure and Properties of Thermally Grown Oxide Layer
Wenhao Duan, Yalin Li, Wenjiang Qiang
- Original Research Article
The Influence of Microstructure Evolution in Thick Plate 9%Ni Steel Submerged Arc Welding Joint on Fracture Toughness Properties
Jiahui Li, Yipeng Li, Dan Liu, Yuming Ding, Haichao Cui, Xinhua Tang, Fenggui Lu
- Original Research Article
Effect of Microstructure and Residual Stress on the Wear Resistance and Thermal Fatigue of 24CrNiMo Alloy Steel Formed Using Laser Direct Metal Deposition
Yongsheng Zhao, Yan Liu, Chenggang Ding, Hui Chen
- Original Research Article
Impact of High Temperature and Water Vapor on the Oxidation Behavior of Chemical Vapor Infiltration-SiCf/SiC Composite
Anu Mohan, A. Udayakumar, M. Kamaraj, Ashutosh S. Gandhi
- Open Access
- Original Research Article
A Methodology to Assess Directional and Spatial Variations of Tensile and Fracture Properties in Fabricated Nuclear Components
Viswa Teja Vanapalli, B. K. Dutta, J. Chattopadhyay, M. K. Samal
- Open Access
- Original Research Article
Effects of Static Strain Aging on Mechanical Performance of Ductile Cast Iron
Ville Björklund, Hannu Hänninen, Sven Bossuyt
- Original Research Article
Performance Evaluation of 70-30 Cu-Ni Filler Metal for Improving Dissimilar Al2024-SS304 Joints’ Efficiency: A Mechanical and Microstructural Investigation
Muhammad Jawad, Asad Ali, Kashif Ishfaq, Mirza Jahanzaib, Muhammad Sajid
- Original Research Article
Friction Stir Back Extrusion of Cu-5 vol.% Ti2SnC Composite
Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati
- Original Research Article
Investigating the Effect of Friction Stir Welding on the Mechanical and Metallurgical Properties of Joining CK45 Steel to AISI 304L Stainless Steel
Hassan Hormozi, Amir Mostafapour, Vahid Pouyafar
- Original Research Article
Effect of Y2O3 on the Microstructures and Properties of Magnetic Field-Assisted Laser-Clad Co-Based Alloys
Kang Qi, Long Jiang
- Original Research Article
Performance Optimization of Ti-6Al-4V Milling Process Using Sustainable Cooling Approach and Application of Rao Algorithms
Yogesh V. Deshpande, T. A. Madankar, Dhriti Khatri, Maseera Sayyed
- Original Research Article
Effect of Hot-Pressing Rate on Interface and Bonding Strength of Mg/Al Composite Sheets with Zn Interlayer
Tingting Liu, Chuande Guo, Shijun Tan, Bo Song, Meng Wang, Guangsheng Huang, Kaihong Zheng, Fusheng Pan
- Original Research Article
Selection of Optimal Process Parameters to Obtain Defect-Free Builds in IN718 Made by Laser Powder Bed Fusion
Kurre Prasanth Kumar Reddy, Boggarapu Nageswara Rao, M. N. Nazeemudheen, Sushant K. Manwatkar, S. V. S. Narayana Murty
- Original Research Article
Femtosecond Laser Micro Drilling of Cooling Holes on Thermal Barrier Coated Titanium Alloy for Aeroengine Application
P. Deepu, T. Jagadesh
- Original Research Article
Annealing Behavior of Cold-Rolled Inconel 601
Preetish C. Dsilva, Basavaraj Padasale, Jitesh Vasavada, Sushil Mishra, Subray R. Hegde
- Original Research Article
Tribological Performance of Gas Tungsten Arc Welded Dissimilar Joints of sDSS 2507/N50 Steel
Anup Kumar Maurya, Amar Patnaik, Shailesh M. Pandey, Rahul Chhibber, Chandan Pandey
- Original Research Article
On Mechanical Properties of 3D-Printed Secondary Recycled Acrylonitrile Butadiene Styrene Composite for Silencer Application in Short-Range Gun
Gulraj Singh, Gurinder Singh Brar, Rupinder Singh
- Original Research Article
Study on Interface Bonding Behavior and Quality Control of 40Cr/Q345B Bimetallic Ring Blank in Vertical Centrifugal Casting
Yachen He, Fangcheng Qin, Xianjing Deng, Yangbo Wang
- Original Research Article
Mechanical and Corrosion Behavior of 7075 Al Alloy Processed by Cold Rolling
Xu Yuan, Ying Chen, Qinzhui Huang, Weikun Wang, Chuanting Wang, Jingjing Sun, Bilan Lin, Houan Zhang
- Original Research Article
Friction Stir Welding of Unequal-Thickness Magnesium Sheets with a Cover Sheet
Ronghao Han, Youchao Chen, Daxin Ren, Gang Song
- Open Access
- Original Research Article
Enhancement of the Microstructure and Fatigue Crack Growth Performance of Additive Manufactured Titanium Alloy Parts by Laser-Assisted Ultrasonic Vibration Processing
Sammy A. Ojo, Kannan Manigandan, Gregory N. Morscher, Andrew L. Gyekenyesi
- Original Research Article
Microstructure Evolution and Deformation Behavior of Ti-55531 Alloy under Non-equilibrium Conditions during Near-Isothermal Forging
M. Meng, Y. H. Zhang, L. T. Ye, H. F. Xu, S. L. Yan
- Original Research Article
Reaction Process and Pore Structure Control of Porous NiAl Intermetallic Compounds via Thermal Explosion
Yu Zhang, Xinyang Jiao, Xiaoxiao Zhang, Jin Zhang, Zhichao Shang, Yang Yu
- Original Research Article
Effect of Single and Co-addition of Rare Earth on the Microstructure, Mechanical Properties, and Corrosion Behavior of AZ31 Magnesium Alloys
May Likha Lwin, Dong-won Shin, Sun Woo Nam, Yohan Go, Young Min Kim, Taek-Soo Kim, Ji-Woon Lee, Soon-Jik Hong
- Original Research Article
Effect of Heat Treatment on the Anisotropic Mechanical Properties of AlSi10Mg Fabricated by Selective Laser Melting
Shijun Xu, Qinghua Lu, Yangling Ou, Peilei Zhang, Hua Yan, Tianzhu Sun, Songyun Ma, Zhirong Luo, Yingtao Tian
- Original Research Article
Effects of Nitrocarburization on the Surface Morphology and Tribology of SKH51 High-Speed Tool Steel
Narongsak Thammachot, Nipon Taweejun, Tanabodee Praditja, Wanna Homjabok
- Original Research Article
Influence of Pulse Voltage on the Corrosion Resistance of Al-4.5Mg-3Si Alloy
Zuofu Zhao, Xin Li, Hui Yuan, Yuqing Zhao, Jingang Qi
- Original Research Article
The Effect of Compound Growth on the Microstructure and Properties of Titanium-Steel Clad Plate Subjected to High Temperature Heat Treatment
Xinyuan Pan, Jin Jiang, Shuaikang Xu, Tianjian Wan, Haitao Liu, Li Liu, Ke Zhang, Jinghui Li, Mingya Zhang
- Original Research Article
Cyclic Quenching Treatment to Improve Strength–Ductility Combinations in 18CrNiMo7-6 Steel
Zhizhi Wang, Xiaomei Gu, Haijun Pan
- Original Research Article
Evaluation and Optimization of Erosion Parameters’ Effects on Polymeric Glasses Using Taguchi Method
Smail Benterki, Abdelaziz Faci, Brahim Barka, Farid Rouabah
- Original Research Article
Effect of La on Mechanical Properties and Precipitated Phase Stability of 2195 Alloy at Elevated Temperature
Wang Fuyue, Ren Yi, Zhang Zherui, Wang Shuang, Zhang Shuai, Zhang Wanshun
- Original Research Article
Effect of Thermal Gradient on Interfacial Microstructure and Mechanical Properties of WC Particle-Reinforced Steel Matrix Composites
Xin Chen, Cong Fang, Xiaomin Huang, Zulai Li, He Wei, Fei Zhang, Quan Shan
- Original Research Article
Formation of Ultrafine Graphite Nodules in Ductile Iron and its Effects on Mechanical Properties
Chen Liu, Yuzhou Du, Pengchun Li, Xin Wang, Wanting Sun, Caiyin You, Bailing Jiang
- Original Research Article
Microstructure Evolution of Al-Zn-Mg-Cu Alloy by Semisolid Compression
Jin Jiang, Xinyuan Pan, Shuaikang Xu, Li Liu, Ke Zhang, Jinghui Li, Mingya Zhang
- Original Research Article
Texture, Mechanical Properties, and Formability of a Lightweight Steel during Cold Rolling and Annealing
Fang-min Lin, Xue-jun Wu, Xiao-feng Zhang, Mei Xing, Yong Yang, Yong-jian Wang
- Original Research Article
Development of Polyaniline-Coated Natural Fiber Composites for Enhanced Thermal Properties
R. Karthikeyan, R. Sridhar, R. Suresh
- Original Research Article
In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature
O. B. Perevalova, A. V. Panin, M. S. Syrtanov
- Original Research Article
Corrosion Characterization of In Situ Nitrogen Reinforced Titanium Alloy Arc Cladding Layer
Jiankang Huang, Lei Shen, Shurong Yu, Xiaoquan Yu, Guangyin Liu, Ding Fan
- Original Research Article
Effect of CoCrNi Interlayer on the Microstructure, Mechanical, and Corrosion Properties of Cold Metal Transfer Al/Steel Joints
Jiawei Jiang, Mingjian Peng, Jin Yang, Wenhu Xu, Ying Liang, Min Zheng, Hongbing Liu, Junmiao Shi, Caiwang Tan
- Original Research Article
Effect of Mn Content on Microstructure, Mechanical Properties, and Corrosion Behavior of Mg-Zn-Gd-Y Alloy
Jiaqi Li, Chunting Liu, Zhenyin Wang, Yuxiang Cai, Jingyuan Li
- Original Research Article
Composition Optimization of Al-Mg-Mn Alloys for Continuous Casting-Direct Rolling and Influence of Er and Zr on Their Microstructure and Mechanical Properties
Guangxi Lu, Cong Xu, Xiucheng Wang, Shaokang Guan
- Original Research Article
Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate
Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem
- Original Research Article
Metal Nitride Coatings of (Cr/Mo)N and (Cr/Ti)N by Ion-Assisted Co-sputtering for Corrosion-Resistant Applications
K. S. Surendra Mohan, S. Gunasekaran, D. Manjubashini, S. Umayal, S. Sivaranjani, B. Subramanian
- Original Research Article
A Boron-Free Ni-25Cr-6P-3Si Amorphous Brazing Foil with a Melting Temperature of 985 °C
Yoshio Bizen
- Original Research Article
Physiomechanical, Flowability, and Antibacterial Characterization of Silver-Doped Eggshell-Derived Hydroxyapatite for Biomedical Applications
Gagan Bansal, Rakesh Kumar Gautam, Joy Prakash Misra, Abhilasha Mishra
- Original Research Article
Electrochemical Behavior and Corrosion Mechanism of Copper Alloys in Coastal Environment Via Al/Ni Doping Strategy
Zhiwei Fu, Youcong Huang, Zhongnan Zheng, Ying Zhang, Jun Xu, Shaokang Chen, Hao Zhang
- Open Access
- Original Research Article
Cold Metal Transfer Welding of Ferritic and Austenitic Stainless Steel: Microstructural, Mechanical, and Electrochemical Studies
Santosh K. Gupta, Awanikumar P. Patil, Ramesh C. Rathod, Aman Gupta, Hitesh Methani, Vipin Tandon
