Issue 2/2016
Content (41 Articles)
Regulation Mechanism of Novel Thermomechanical Treatment on Microstructure and Properties in Al-Zn-Mg-Cu Alloy
Zhiguo Chen, Jieke Ren, Jishuai Zhang, Jiqiang Chen, Liang Fang
Effect of Carbide Distribution on Corrosion Behavior of the Deep Cryogenically Treated 1.2080 Steel
Kamran Amini, Amin Akhbarizadeh, Sirus Javadpour
Effect of Preaging Deformation on Aging Characteristics of 2507 Super Duplex Stainless Steel
M. K. Mishra, A. G. Rao, R. Sarkar, B. P. Kashyap, N. Prabhu
Enhancing the Mechanical Properties and Formability of Low Carbon Steel with Dual-Phase Microstructures
M. Habibi, R. Hashemi, E. Sadeghi, A. Fazaeli, A. Ghazanfari, H. Lashini
The influence of Si as reactive bonding agent in the electrophoretic coatings of HA–Si–MWCNTs on NiTi alloys
Vida Khalili, Jafar Khalil-Allafi, Hossein Maleki-Ghaleh, Alexander Paulsen, Jan Frenzel, Gunther Eggeler
The Irradiation Performance and Microstructural Evolution in 9Cr-2W Steel Under Ion Irradiation
Sultan Alsagabi, Indrajit Charit, Somayeh Pasebani
Phase Diagram Calculation and Analyze on Cast High-Boron High-Speed Steel
Yong-wei Yang, Han-guang Fu, Yong-ping Lei, Kai-ming Wang, Li-long Zhu, Liang Jiang
High-Temperature Corrosion Behavior of Different Regions of Weldment of 2.25Cr-1Mo Steel in SO2 + O2 Atmosphere
D. Ghosh, A. K. Shukla, S. K. Mitra, B. Satpati
Suspension Rheology, Porosity and Mechanical Strength of Porous Hydroxyapatite Obtained by Gel-casting and Infiltration
Jazmín González Ocampo, Mateo Escobar Jaramillo, Diana Escobar Sierra, Claudia Ossa Orozco
Effect of Microstructure on the Electrochemical Behavior of Ti-10 Mass% Mn Alloys in High Chloride Solution
Toshiyasu Nishimura
Superior Mechanical Properties of AlCoCrFeNiTi x High-Entropy Alloys upon Dynamic Loading
Z. M. Jiao, S. G. Ma, M. Y. Chu, H. J. Yang, Z. H. Wang, Y. Zhang, J. W. Qiao
Reaction Time and Film Thickness Effects on Phase Formation and Optical Properties of Solution Processed Cu2ZnSnS4 Thin Films
Amna Safdar, Mohammad Islam, Muhammad Aftab Akram, Mohammad Mujahid, Yasir Khalid, S. Ismat Shah
On the Electrodeposition of Ca-P Coatings on Nitinol Alloy: A Comparison Between Different Surface Modification Methods
M. R. Etminanfar, J. Khalil-Allafi
Structural Evolution of Silicon Oxynitride Fiber Reinforced Boron Nitride Matrix Composite at High Temperatures
Chunrong Zou, Bin Li, Changrui Zhang, Siqing Wang, Zhengfang Xie, Changwei Shao
Comparison of the Fatigue Crack Propagation Behavior of Two Different Forms of PMMA Using Two-Stage Zone Model
Wenfeng Hao, Liting Ma, Xinwen Chen, Yanan Yuan, Yinji Ma
The Structure and Bond Strength of Composite Carbide Coatings (WC-Co + Ni) Deposited on Ductile Cast Iron by Thermal Spraying
Marzanna Ksiazek, Lukasz Boron, Marta Radecka, Maria Richert, Adam Tchorz
The Corrosion Behavior of Ni3(Si,Nb) Alloys in Boiling 70 wt.% Sulfuric Acid
Jen-Hsien Hsu, Christopher M. Larson, Joseph W. Newkirk, Richard K. Brow, San-Hong Zhang
Electrochemical Corrosion Behavior of Thermal-Sprayed Stainless Steel-Coated Q235 Steel in Simulated Soil Solutions
Wei Wei, Xin-qiang Wu, Wei Ke, Song Xu, Bing Feng, Bo-tao Hu
The Strain-Hardening Behavior of TZAV-30 Alloy After Various Heat Treatments
S. X. Liang, L. X. Yin, L. Y. Zheng, M. Z. Ma, R. P. Liu
Optimization of Heat Treatments for Reversion of Strain-Induced Martensite in 304L SS Explosive Clad
T. N. Prasanthi, C. Sudha, P. K. Parida, Arup Dasgupta, S. Saroja
The Kinetics of Metadynamic Recrystallization in a Ni-Cr-Mo-Based Superalloy Hastelloy C-276
Chi Zhang, Liwen Zhang, Wenfei Shen, Cuiru Liu, Yingnan Xia
Artificial Neural Network Modeling to Evaluate the Dynamic Flow Stress of 7050 Aluminum Alloy
Guo-zheng Quan, Tong Wang, Yong-le Li, Zong-yang Zhan, Yu-feng Xia
Effect of Welding Heat Input on the Corrosion Resistance of Carbon Steel Weld Metal
Yongxin Lu, Hongyang Jing, Yongdian Han, Lianyong Xu
Influence of Dispersoids on Corrosion Behavior of Oxide Dispersion-Strengthened 18Cr Steels made by High-Energy Milling
M. Nagini, A. Jyothirmayi, R. Vijay, Tata N. Rao, A. V. Reddy, Koteswararao V. Rajulapati, G. Sundararajan
Compressive Behavior and Damping Property of Mg Alloy/SiCp Composite Foams
Wenzhan Huang, Hongjie Luo, Hao Lin, Yongliang Mu, Bing Ye
Tensile Properties of Electrodeposited Nanocrystalline Ni-Cu Alloys
P. Q. Dai, C. Zhang, J. C. Wen, H. C. Rao, Q. T. Wang
Modeling Corrosion Reactions of Steel in a Dilute Carbonate Solution
Faysal Fayez Eliyan, Akram Alfantazi
Corrosion Protection Properties of PPy-ND Composite Coating: Sonoelectrochemical Synthesis and Design of Experiment
H. Ashassi-Sorkhabi, R. Bagheri, B. Rezaei-Moghadam
Effect of Intercritical Temperature on the Structure Property Correlation of Multiphase High-C Spheroidized Steel
S. Monia, A. Varshney, Gouthama, S. Sangal, S. Kundu, S. Samanta, K. Mondal
Superplastic Properties of AZ31 and AZ31-1.0Y-1.3Sr Alloy Produced by Twin-Roll Casting and Sequential Hot Rolling
Huiyan Ning, Yandong Yu, Kai Lin, Lihua Wen, Chunxiang Liu
Fabrication of Al2O3/glass/Cf Composite Substrate with High Thermal Conductivity
S. X. Wang, G. S. Liu, X. Q. Ouyang, Y. D. Wang, D. Zhang
Spark Plasma Sintering of MgO-Strengthened Aluminum
M. Ben-Haroush, G. Dikovsky, S. Kalabukhov, M. Aizenshtein, S. Hayun
Laser Cladding of Composite Bioceramic Coatings on Titanium Alloy
Xiang Xu, Jiege Han, Chunming Wang, Anguo Huang
Microstructure- and Strain Rate-Dependent Tensile Behavior of Fiber Laser-Welded DP980 Steel Joint
Qiang Jia, Wei Guo, Peng Peng, Minggao Li, Ying Zhu, Guisheng Zou
Effect of Grain Size Distribution on Processing Maps for Isothermal Compression of Inconel 718 Superalloy
Jianguo Wang, Dong Liu, Yang Hu, Yanhui Yang, Xinglin Zhu
The Effect of Multi-pass Equal-Channel Angular Pressing (ECAP) for Consolidation of Aluminum-Nano Alumina Composite Powder on Wear Resistance
Reza Derakhshandeh-Haghighi, Seyed Ahmad Jenabali Jahromi
Electrochemical Behavior of Pure Copper in Phosphate Buffer Solutions: A Comparison Between Micro- and Nano-Grained Copper
O. Imantalab, A. Fattah-alhosseini, M. K. Keshavarz, Y. Mazaheri
Effect of Powder-Suspended Dielectric on the EDM Characteristics of Inconel 625
Gangadharudu Talla, S. Gangopadhyay, C. K. Biswas
Erratum to: The Effect of Quench-Induced Residual Stresses on the Distortion of Machined Thin-Walled Parts
Soroush Masoudi, Ghasem Amirian, Ehsan Saeedi, Mohammad Ahmadi