Issue 2/2026
Content (74 Articles)
Prediction of Hardness and Fracture Toughness in High-Entropy Alloy Bonded Cemented Carbides through Machine Learning
- Original Research Article
Chengqiang Fan, Jialin Sun, Shurong Ning, Xiao Li, Jun Zhao
Modeling and Thermal-Structural Transient Simulation of Al Alloy Processed by Wire Arc Additive Manufacturing Using Gaussian Moving Heat Source
- Original Research Article
Ipsit Mishra, Rajeev Srivastava
Investigating Temperature-Dependent Mechanical Properties of PLA in FDM: Experimental and Simulation Approaches
- Original Research Article
Farbod Bijari, Nahal Barzegar Bagheri
Effect of Ce on Microstructure and Mechanical Properties of Al-Cu-Mn Alloys
- Original Research Article
Weidong Chen, Zhu Chen, Ruofei Zhu, Xinrong Li, Shufang Yan, Yi Sui, Yinhui Qu
Effects of Different Heat Treatment Processes on the Microstructure and Mechanical Properties of Mg-Sn-Zn-Zr Alloy
- Original Research Article
Tong Zhou, Yaqin Li, Tianshui Zhou, Lanfeng Li, Shiwen Hu, Xiaoqiang Li, Dexue Liu
Microstructural, Mechanical, and Corrosion Behavior of Cu-Reinforced WC/Ni60 Composite Coatings on 45# Steel Prepared by Induction Cladding
- Original Research Article
Bin Zhong, Zhao Ma, Pan Wang, Zhengyang Yu, Chao Niu
Tribological Behavior of Cu-10Pb-10Sn/Steel Bimetals under Different Loads and Speeds: Dry, Kerosene, and Oil Lubrication Conditions
- Original Research Article
Yougui Zhang, Zhenhua Shi, Guowei Zhang, Xiaoyan Ren, Hong Xu
Effect of Dimple Shape on the Tribological and Surface Properties of Laser-Textured 1045 Steel
- Original Research Article
Wenwen Zhang, Mingyuan Zhang, Yuanzhe Huang, Xingliang Dong, Li Zeng, Shukun Cao
Study on Microstructure Evolution and Mechanical Properties of New Lightweight (NbTiV)100-xBx/Cx High-Entropy Alloys
- Original Research Article
Ruiyuan Wang, Ning Zhao, Daohe Zhang, Shiwen Hu, Xiaoqiang Li, Dexue Liu
Effect of La2O3 Addition on the Microstructure, Phase Transformation Behavior, and Wear Properties of Selective Laser-Melted NiTi Alloys
- Original Research Article
Zhenhua Li, Dudu Song, Yu Zhang, BoYin, Jieqing Huang, Jingyu Qiao, Shile Zheng
Corrosion Behavior of GH3535 Alloy and Its Enamel Coating in KCl-LiCl Gas at 550 °C
- Original Research Article
Zhongdi Yu, Chaochao Wang, Jumei Zhang, Jinping Wu
A New Perspective to Understand the Effect of Loading Rate on Creep Deformation Behavior for Novel Mo96.18Nb3.61W0.21 Single Crystals: Work–Energy Conversion
- Original Research Article
B. J. Wang, B. Q. Jiao, T. Yin, Z. W. Hu, W. W. Zhang, W. Bai, W. Zhang, J. F. Li
Investigations on Tribological Effectiveness and Tribo-Reactions of Non-edible Vegetable Lubricants with Polytetrafluoroethylene as Additives under AISI E-52100
- Original Research Article
Anthony Chukwunonso Opia, Samion Syahrullail, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Ibham Veza
Microstructure and Mechanical, Tribological and Magnetic Properties of Wear-Resistant and Permeable Iron-Based Amorphous HVOF Coatings
- Original Research Article
Chun Guo, Qingcheng Lin, Chi Qin, Ruizhang Hu
Effect of Roller Burnishing on the Mechanical Behavior and Surface Quality of AISI 316 Stainless Steels
- Original Research Article
Engin Ünal, Hilal Büşra Albar, Faruk Karaca
The Low-Velocity Impact Behavior and Energy Absorption Characteristics of Aluminum Foam Sandwich Structures
- Original Research Article
Baixing Deng, Junshan Zhang, Daoyuan Li, Yukun An, Youdong Xing, Hongtao Wang
Microstructure and Mechanical Properties of Ni-Rich Ni-Co-Fe-Ti-Al Multi-Principal Element Alloy
- Original Research Article
Peng Xiao, Zhou Yang, Yuqing Huang, Chengqi Zhang
Study on Strain Field and Damage Characteristics Caused by the Distribution of Detonation Point
- Original Research Article
Yong Zhao, Renshu Yang, Jinjing Zuo, Zhen Liu, Shulin Chen
Effect of Homogenization on Microstructure, Thermal, and Mechanical Properties of Arc-Melted AlFeCrNi Medium Entropy Alloy
- Original Research Article
Saurav Kumar, Himadri Roy, Sudip Kumar Samanta, Amar Patniak, Ajaya Kumar Pradhan, Vinod Kumar
Influence of Radio Frequency Magnetron Sputtering on the Microstructure, Mechanical Properties, and Wear Performance of NiTi Alloy Coating on Bearing Steel
- Original Research Article
Tajamul Ashraf, Pavan Kumar Vangara, Turali Narayana, Deepak Kumar Naik, Shahid Saleem, Koppala Venu Gopal
Achieving Superior Mechanical and Electrochemical Properties in a Fe−3Cu Alloy with a Gradient Structure
- Original Research Article
Yu Liu, Jiangjie Liao, Pengcheng Ma, Mian Chen, Jing Qiu, Jian Hu
Fused Filament Fabricated Strut-Based Uniform and Density Gradient Gyroid Structures: An Experimental Investigation of Mechanical Properties and Energy Absorption Capabilities
- Original Research Article
Hardik D. Sondagar, Shailendra Kumar, Vishal S. Sharma
Strain Rate and Temperature Dependence of Mechanical Properties and Failure Behavior of AA7075-T651
- Original Research Article
Suneel Choudhary, Ved Prakash Sharma, G. A. Harmain
Effects of Different Cu Additions on Microstructure and Corrosion Properties of Fe-10Mn-3Al Steel
- Original Research Article
Fumin Xu, Liangshun Huang, Meilong Feng
Parametric Optimization and Microstructural Analysis of Ultrasonically Machined Friction Stir Welded Aluminum Alloy 6063
- Original Research Article
Vikrant Singh, Sanidhya Kumar, Mohit Vishnoi, Ravi Shankar Thakur, Sachin Jha, Anuj Bansal, N. Jeyaprakash, Sundara Subramanian Karuppasamy
Effects of Sealing Treatment on the Reflectivity and Corrosion Behavior of Anodized Aluminum in Artificial Sweat
- Original Research Article
Dong Han, Liman Chen, Haixia Jiang, Wenjuan Zhang, Guangrui Gao
Investigation of Residual Stress in Ice-Covered Milling of Ti-6Al-4V Alloy Thin-Walled Parts with Experimental and Finite Element Simulations
- Original Research Article
Yongquan Jin, Xiaoqiang Wu, Feng Gao, Taiyan Gong, Xiaofan Deng, Rui Xue
The Mechanical Properties and Microstructure Evolution of NM400/Q345 Clad Plates Prepared by the NG-TMCP
- Original Research Article
Jia-Hui Fang, Yan-Bing Lv, Rong-Jun Wang, Lian-Yun Jiang, He-Xin Cheng, Zhi-Quan Huang
Laser Additive Manufactured V-Shaped and L-Shaped Ti65 Titanium Alloy Interfaces and High-Temperature Performance
- Original Research Article
Liping Liu, Xiaodan Li, Jun Yin, Changyu Wang, Jingjing Zhang, Pengfei Li
Study on the Microstructure and Properties of Additive Manufacturing Al-Mg-Sc Alloy with CMT-PADV + Arc Weaving Process
- Original Research Article
Hongfei Xu, Lijun Yang, Yiming Huang, Ying Wang
Development of Novel Sustainable Electrolytic Magnetorheological (EMR) Fluid for Finishing Additive-Manufactured Surfaces by Electrochemical-Based Magnetorheological (ECMR) Finishing
- Original Research Article
Saurabh Singh Rathore, Kunal Arora, Varun Sharma, Navneet Arora
On Fabrication of Novel Polyvinylidene Fluoride BaTiO3-Cu-Doped ZnO-Based Filament for 3D Printing of Pacemakers
- Original Research Article
Ranvijay Kumar, Vinay Kumar, Minhaz Husain, Rupinder Singh, Pawan Kumar
Investigation of the Hot-Rolled Medium-Mn Steels with Ultra-high Strength and Considerable Ductility
- Original Research Article
Peng Chen, Jing Wang, Xiao-Wu Li
Role of Microstructural Modification in the Slurry Erosion Behavior of Friction Stir Processed AZ31 Magnesium Alloy
- Original Research Article
S. Annamalai, Md Saad Patel, B. Anand Ronald, Ariful Rahaman, R. Jose Immanuel
Isotropic Superfinishing Effects on the Surface Integrity of Ground Gears
- Original Research Article
Gilberto Martins de Oliveira Gomes, Ronnie Rodrigo Rego, André Luiz Rocha D’Oliveira, Angelo Alves Carvalho, Antonio Gallinucci
Resin-Bonded Discontinuous Grinding Tools for MO40 Steel Manufactured by Vat Photopolymerization
- Original Research Article
Babak Houshmand, Seyed Mohsen Safavi
Understanding the Grindability of Nickel-Based Cast Superalloy DZ125: Grinding Force and Surface/Subsurface Damage Behavior
- Original Research Article
Mengbin Lu, Qing Miao, Chenwei Dai, Zhen Yin
The Effect of Cryogenic-Temperature Rolling on the Microstructure and Mechanical Properties of TA18 Titanium Alloy
- Original Research Article
Yiwen Yan, Pei Liu, Zhiyong Zhang, Aiqin Wang, Zhizhi Wang, Xuekun Wei, Jingpei Xie
Microstructural Evolution and Mechanical Behavior of Dissimilar Nickel-Based Superalloy 718/Stainless Steel 321 Joints Fabricated via Pulsed Laser Welding
- Original Research Article
Hossein Hosseini Tayeb, Mostafa Fazeli, Seyed Mahdi Rafiaei
Effect of Multiple Weld Repairs on Microstructure, Mechanical Properties, and Stress Corrosion Cracking Behavior of Quenched and Tempered A 517-B Steel
- Original Research Article
Behnam Hosseinzaei, Peyman Shayanfar
Hybrid Strengthening Effect Induced by Dual Deformation in Weakened-Texture Mg Alloy
- Original Research Article
Feng Long, Xiao Liu, Chunfang Zhao, Yan Tang, Weitao Jia
Machine Learning-Based Data Prediction in Friction Stir Spot Welding for AA2018-H2 and C10200 on Fracture Load and Ductility
- Original Research Article
Suprim Sardar, Sutanu Misra, Partha Pratim Dey
Thermal Damage of Pulsed Laser Brazing of Diamond Grinding Wheel
- Original Research Article
Shichun Li, Junzhe Li, Lei Zhou, Mengcen Zou, Gang Xiao, Fujian Sun
Investigating the Microstructure, Mechanical Properties, Wear, and Corrosion Behavior of Hybrid MAX-Phase-Reinforced AA 5083 Composites Fabricated By Friction Stir Surface Processing
- Original Research Article
Sahw S. Almutairi, Essam B. Moustafa, S. S. Mohamed, T. S. Mahmoud, Ahmed O. Mosleh
Heat Treatment-Induced Pore Migration and Conductivity Evolution in Additively Manufactured Copper
- Original Research Article
Wondayehu Yeshewas Alemu, Guang-Jie Huang, Chia-Wei Tseng, Kuo-Chi Chiu, Shufeng Yang, Jhewn-Kuang Chen
Effect of Solution Aging Parameters on Microstructure and Mechanical Properties of Hot-Extruded 6082 Aluminum Alloy Profile
- Original Research Article
Qiangchao Shan, Linqing Yang, Hongyan Wang, Cheng Qian, Zulai Li, Han Xiao
Effect of Different Aging Conditions on Microstructure and Mechanical Properties of an ODS-AFA Steel
- Original Research Article
Chenxin Yin, Lu Han, Yingjie Wang, Haochen Guan, Lingzhi Chen, Zhangjian Zhou
Influence of Boron on the Hardenability of Low Carbon Alloy Platform Steel
- Original Research Article
Guangdi Zhao, Ximin Zang, Bo Wang, Jie Yang, Lingzhong Kong, Xue Li, Xiaoyu Yao, Zhenming Yu
Effect of Solid Solution Temperature on the Microstructure and Mechanical Properties of Al-5Mg-2.5Li Alloy
- Original Research Article
Fufangzhuo Chai, Ji-ang Du, Yunze Jiang, Chengchao Du
Study on the Corrosion Resistance of Laser Remelting/Diamond-Like Carbon Composite Coatings on Stainless Steel Surface
- Original Research Article
Sai Li, Dongxu Chen, Xingang Ai, Shengli Li, Tan Zhao, Xiang Wang
High-Temperature Corrosion Behavior of 3D-Printed Scalmalloy in Sulfate-Chloride Environments
- Original Research Article
B. R. Senthilkumar, S. Senthil Kumar, R. Yokeswaran, T. S. Senthilkumar
Wear and Corrosion Resistances of HVOF-Sprayed WC Composite Coatings for Application in Screws of Injection Molding Machines
- Original Research Article
Wangping Wu, Sheng Lin, Qinqin Wang
Electrical Properties of Na2Pb2Nd2W2Ti4V4O30 Ferroelectric Ceramics
- Original Research Article
Aditya K. Sahu, S. Behera, Piyush R. Das
Effect of Cold Rolling on the Microstructure and Properties of Laser-Welded PHS Alloy Steel
- Original Research Article
Bo Li, Famin Cong, Chunzhi Xia, Chengxiang He, Xiangping Xu
Assessment of the Tribological Behavior of WAAM-Fabricated SS316L through Advanced Ensemble Machine Learning Predictions and RSM-Based Optimization
- Original Research Article
S. Saravanan, Saravanakumar Sengottaiyan, Ra. Aravind, S. Krishnakumar
Metallurgical, Mechanical, and Corrosion Behavior of Wire Arc Additively Manufactured Super Duplex Stainless Steel ER2594 Wall Fabricated using CMT Welding
- Original Research Article
Shikha Pant, Subodh Kumar, A. S. Shahi
Effect of Holding Time in Post-weld Heat Treatment on Microstructure, Residual Stress, and Mechanical Properties of Welded Pressure Vessel Steel
- Original Research Article
Jednupong Palomas, Thamrongsin Siripongsakul, Chayanee Tippayasam, Thammanoon Thaweechai, Attaphon Kaewvilai
Correction: Effect of Holding Time in Post-weld Heat Treatment on Microstructure, Residual Stress, and Mechanical Properties of Welded Pressure Vessel Steel
- Correction
Jednupong Palomas, Thamrongsin Siripongsakul, Chayanee Tippayasam, Thammanoon Thaweechai, Attaphon Kaewvilai
Characterization and Evaluation of Ti-12Mo-3Ag Alloy Fabricated for Biomedical Applications by Powder Metallurgy
- Original Research Article
Hala E. Kattarya, Emad El-Kashif, Lamiaa Z. Mohamed
Effect of Interfacial Diffusion Layer on Microstructure and Properties of High-Entropy Alloy Particle-Reinforced Cu Matrix Composites Prepared By Friction Stir Processing
- Original Research Article
Rui Zhu, Yumeng Sun, Jiacheng Feng, Yupeng Li, Wei Liu, Wenbiao Gong
Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures
- Original Research Article
Koustav Ghosh, Dennis Milaege, Paul Steinmeier, Mirko Schaper, Kay-Peter Hoyer, Sudipta Pramanik
Fatigue and Tensile Performance of Cold Metal Transfer-Based Wire Arc Additively Manufactured 316L Stainless Steel
- Original Research Article
Sudhir Behera, Mahesh Patel, Pushpendra Kumar Dwivedi, Ramamoorthy Velayutham, Adarsh Gaurav, Jayaprakash Murugesan
Influence of Ti on Structure, Tribology, and Corrosion of CoCrFeMnNiTix High-Entropy Alloy
- Original Research Article
Caner Bulut, Fatih Yıldız, Temel Varol, Serhat Berk Akçay, Tevfik Oğuzhan Ergüder
Insights into Additively Manufactured Alnico Alloys Using Laser Metal Deposition Technology
- Original Research Article
Amirkeyvan Rahimi, Yara Almubarak
Effect of Shot Peening Strength on Surface Microstructural Characteristics and Wear Properties of Selective Laser Melting AlSi10Mg Alloy
- Original Research Article
Zi Li, Haijun Pan, Wenyu Tao, Lin Liu, Zhiqiang Wu, Zhihui Cai
Enhanced Electrochemical Performance of Strontium Cobaltite-Based Electrode for Supercapacitors by Cu Doping
- Original Research Article
Abu-Zar Kazmi, Saqib Jabbar, Aminah Hameed, Syed Ali Raza, Suleman Ahmad, Tayyaba Ghani, Dilawar Ali, Riaz Ahmad
Preparation of Carbon Quantum Dots-Polypyrrole/Nanoporous Gold Composite Electrode and Its Application in Supercapacitors
- Original Research Article
Jinfang Yue
Effect of Filler Wire Conditions on the Microstructure and Mechanical Properties of Straight Tube Butt-Welded T92 Steel Tubes
- Original Research Article
S. Santhosh Kumar, S. Ramesh Kumar
Microstructure and Properties of Inconel738/Inconel718 Composite Coatings Prepared By Laser Cladding
- Original Research Article
Aihu Wu, Xiaojin Miao, Meiping Wu, Hang Wang, Xin Jin, Jie Li, Hao Tang
Impact of Y2O3 Ceramic Oxide Addition on the Microstructure and Tribological Properties of 60 Fe-40 Ni Alloy Prepared by PM
- Original Research Article
A. Hegazy Khallaf, Omayma A. Elkady, Mohamed Ali Hassan
A Study on Structural and Electrical Properties of Lead Zinc Niobate-Bismuth Ferrite Solid Solution for Electronic Device Application
- Original Research Article
D. Chauhan, B. Biswal, S. K. Pradhan, S. Bhuyan, S. N. Das
CuO Nanoparticles-Driven Microstructure Evolution and Advanced Mechanical, Thermal, and Electrical Properties of Sn-10Zn Solder Alloys
- Original Research Article
Sallah A. Al Hashedi, Hamed Al-Sorory, Najeeb S. Al-zoreky, Adil Alshoaibi, Khaled M. A. Ramadan, Zafar Iqbal, A. Q. Alosabi
Effect of the Laser Cleaning Process on the Surface State and the Fatigue Strength of a Ferritic Steel
- Original Research Article
Guillaume Androuin, Matthieu Dhondt, Célia Caër, Sylvain Calloch
A Generalized Linear Viscoelastic Model of Polytetrafluoroethylene From 4 K to 403 K
- Original Research Article
Lei Zhao, Jiawei Qiao, Jie Zhang, Jing Wang, Quanliang Zhao, Junjie Yuan, Can Huang, Mengying Zhang, Guangping He
